K. Kim

发表

Over 95% of large-scale length uniformity in template-assisted electrodeposited nanowires by subzero-temperature electrodeposition

H. Cho, Sangwoo Shin, B. Kong, 2011, Nanoscale research letters.

Analysis of conjugated heat transfer, stress and failure in a gas turbine blade with circular cooling passages

Dong Hyun Lee, H. Cho, K. Kim, 2011 .

Enhanced Cooling Effectiveness in Full-Coverage Film Cooling System With Impingement Jets

Hyung Hee Cho, Dong Hyun Lee, Sang‐Hyun Oh, 2008 .

Effect of impingement jet on the full-coverage film cooling system with double layered wall

Dong Hyun Lee, Sang‐Hyun Oh, H. Cho, 2017 .

Optimal design of impinging jets in an impingement/effusion cooling system

Hyung Hee Cho, Hokyu Moon, Jun Su Park, 2014 .

Failure analysis in after shell section of gas turbine combustion liner under base-load operation

Hyung Hee Cho, Namgeon Yun, Dong Hyun Lee, 2010 .

Effect of the thermal insulation on generator and micro gas turbine system

Hyung Hee Cho, Sehjin Park, Jun Su Park, 2013 .

Multi-variable thermal design of T-structured phase-change memory cell using advanced response surface method

H. Cho, Sangwoo Shin, B. Kim, 2012 .

Thermal Stress Analysis of $\hbox{Ge}_{1}\hbox{Sb}_{4} \hbox{Te}_{7}$-Based Phase-Change Memory Devices

H. Cho, Sangwoo Shin, K. Kim, 2011, IEEE Transactions on Electron Devices.

Thermal Stress Analysis of {Ge}_{1}{Sb}_{4} {Te}_{7}-Based Phase-Change Memory Devices

H. Cho, Sangwoo Shin, K. Kim, 2011 .

Optimization of microscale vortex generators in a microchannel using advanced response surface method

Hyung Hee Cho, Sangwoo Shin, Beom Seok Kim, 2011 .

Thermal and creep analysis in a gas turbine combustion liner

Dong Hyun Lee, H. Cho, K. Kim, 2009 .

Optimization of Angled Ribs for Heat Transfer Enhancement in a Square Channel with Bleed Flow

H. Cho, K. Kim, H. Lee, 2008 .

Effects of Rotation Speed on Heat Transfer in a 90°-Rib Roughened Two-Pass Duct

Yun-Young Kim, H. Cho, K. Kim, 2003 .

Single-phase convection and boiling heat transfer: Confined single and array-circular impinging jets

H. Cho, K. Kim, C. Shin, 2007 .

Effect of the injection angle on local heat transfer in a showerhead cooling with array impingement jets

Dong Hyun Lee, H. Cho, K. Kim, 2018 .

Material design of a film cooling system using experimental heat transfer data

H. Cho, K. Kim, J. S. Park, 2012 .

Influence of material properties on temperature and thermal stress of thermal barrier coating near a normal cooling hole

Dong Hyun Lee, H. Cho, Sangwoo Shin, 2011 .

Effects of Unsteady Wake on Heat Transfer of Endwall Surface in Linear Cascade

Dong Hyun Lee, H. Cho, K. Kim, 2014 .

Thermo-mechanical analysis of an internal cooling system with various configurations of a combustion liner after shell

Hokyu Moon, H. Cho, B. Kim, 2015 .

Effects of Rotation Speed on Heat Transfer and Flow in a Coolant Passage with Turning Region (II) - Parallel Ribbed Duct -

Yun-Young Kim, H. Cho, K. Kim, 2005 .

Detailed Heat/Mass Transfer Distributions in a Rotating Smooth Channel With Bleed Flow

Dong Hyun Lee, H. Cho, K. Kim, 2007 .

Local Heat/Mass Transfer Phenomena in Rotating Passage, Part 2: Angled Ribbed Passage

Dong Hyun Lee, Yun-Young Kim, H. Cho, 2006 .

Stable and uniform heat dissipation by nucleate-catalytic nanowires for boiling heat transfer

H. Cho, Sangwoo Shin, B. Kim, 2014 .

Heat Transfer in Rotating Channel With Inclined Pin-Fins

Dong Hyun Lee, M. Chyu, H. Cho, 2011 .

Thermo-structural analysis of cracks on gas turbine vane segment having multiple airfoils

Hyung Hee Cho, Heeyoon Chung, Jun Su Park, 2017 .

Surface roughening for hemi-wicking and its impact on convective boiling heat transfer

H. Cho, B. Kim, K. Kim, 2016 .

Control of superhydrophilicity/superhydrophobicity using silicon nanowires via electroless etching method and fluorine carbon coatings.

H. Cho, Sangwoo Shin, B. Kim, 2011, Langmuir : the ACS journal of surfaces and colloids.

Detailed measurement of heat/mass transfer with continuous and multiple V-shaped ribs in rectangular channel

Hyung Hee Cho, Dong Hyun Lee, Dong-Ho Rhee, 2009 .

Conjugated heat transfer and temperature distributions in a gas turbine combustion liner under base-load operation

Dong Hyun Lee, H. Cho, K. Kim, 2010 .

Effect of thermal stress on creep lifetime for a gas turbine combustion liner

Hyung Hee Cho, Sangwoo Shin, Hokyu Moon, 2015 .

Enhanced Boiling Heat Transfer using Self-Actuated Nanobimorphs.

H. Cho, Sangwoo Shin, B. Kim, 2018, Nano letters.

Heat (mass) transfer and friction loss in two-pass ducts with various parallel rib arrangements

Dong Hyun Lee, Sei-Young Lee, H. Cho, 2009 .

Pressure drop and thermal performance in rotating two-pass ducts with various cross rib arrangements

Dong Hyun Lee, H. Cho, K. Kim, 2008 .

Influence of duct aspect ratio on heat/mass transfer in coolant passages with rotation

Dong Hyun Lee, Yun-Young Kim, H. Cho, 2007 .

Heat transfer and flow temperature measurements in a rotating triangular channel with various rib arrangements

Dong Hyun Lee, H. Moon, H. Cho, 2009 .

Optimal design of transverse ribs in tubes for thermal performance enhancement

Dong Hyun Lee, Hokyu Moon, H. Cho, 2010 .

Detailed Measurement of Heat/Mass Transfer in a Rotating Equilateral Triangular Channel with Smooth Walls

Dong Hyun Lee, H. Cho, K. Kim, 2007 .

Optimal Design of Rib Turbulators in a Combustion Liner for Creep Lifetime Enhancement

H. Cho, K. Kim, Namgeon Yun, 2009 .

Tuning the morphology of copper nanowires by controlling the growth processes in electrodeposition

H. Cho, Sangwoo Shin, B. Kong, 2011 .

Thermal Analysis of a Film Cooling System with Normal Injection Holes Using Experimental Data

Dong Hyun Lee, H. Cho, K. Kim, 2009 .

Thermo-mechanical life prediction for material lifetime improvement of an internal cooling system in

Hyung Hee Cho, Namgeon Yun, H. Cho, 2011 .

Lifetime Prediction of Film Cooling Systems with and without Thermal Barrier Coating

Dong Hyun Lee, H. Cho, K. Kim, 2010 .

Thermal Analysis in a Film Cooling Hole with Thermal Barrier Coating

Dong Hyun Lee, H. Cho, Sangwoo Shin, 2009 .

THERMAL-MECHANICAL LIFE PREDICTION IN AFTER SHELL SECTION OF GAS TURBINE COMBUSTION LINER

Dong Hyun Lee, H. Cho, K. Kim, 2009 .

Optimal design of angled rib turbulators in a cooling channel

Dong Hyun Lee, H. Cho, Sangwoo Shin, 2009 .

Heat/Mass Transfer Characteristics in Angled Ribbed Channels With Various Bleed Ratios and Rotation Numbers

Hyung Hee Cho, Dong Hyun Lee, H. Cho, 2008 .

Effects of Rib Arrangements and Rotation Speed on Heat Transfer in a Two-Pass Duct

Hyung Hee Cho, Dong Ho Rhee, Yun-Young Kim, 2003 .

Thermo-mechanical analysis of an internal cooling system with various configurations of a combustion liner after shell

Hokyu Moon, H. Cho, B. Kim, 2015, Heat and Mass Transfer.

Heat Transfer on Rotating Channel With Various Heights of Pin-Fin

Dong Hyun Lee, M. Chyu, H. Cho, 2008 .

Influences of nozzle-plate spacing on boiling heat transfer of confined planar dielectric liquid impinging jet

Hyung Hee Cho, Chang Hwan Shin, Sung Hwan Lim, 2009 .

Micro-nano hybrid structures with manipulated wettability using a two-step silicon etching on a large area

H. Cho, Sangwoo Shin, B. Kim, 2011, Nanoscale research letters.

Heat Transfer Characteristics of an Angled Array Impinging Jet on a Concave Duct

Dong Hyun Lee, H. Cho, K. Kim, 2012 .

Heat Transfer and Fluid Flow on Dimpled Surface With Bleed Flow

H. Cho, B. Kim, K. Kim, 2014 .

Effects of bleed flow on heat/mass transfer in a rotating rib-roughened channel

Dong Hyun Lee, H. Cho, K. Kim, 2007 .

Local Heat/Mass Transfer and Friction Loss Measurement in a Rotating Matrix Cooling Channel

Dong Hyun Lee, H. Cho, K. Kim, 2009 .

Detailed measurement of heat/mass transfer and pressure drop in a rotating two-pass duct with transverse ribs

Dong Hyun Lee, H. Cho, K. Kim, 2007 .

Local Heat/Mass Transfer Phenomena in Rotating Passage, Part 1: Smooth Passage

Hyung Hee Cho, Dong Ho Rhee, Dong Hyun Lee, 2006 .