Jianmin Li

发表

Enhancing photocurrent of Cu(In,Ga)Se2 solar cells with actively controlled Ga grading in the absorber layer

Z. Ding, Xudong Xiao, Junbo Gong, 2019, Nano Energy.

Superficial composition engineering for oxide nanoparticles derived Cu2ZnSn(S, Se)4 solar cells by a three-step annealing process

Limei Lin, Jianmin Li, Huiling Cai, 2019, Solar Energy.

Forming an Ultrathin SnS Layer on Cu 2 ZnSnS 4 Surface to Achieve Highly Efficient Solar Cells with Zn(O,S) Buffer

Xudong Xiao, Jianmin Li, Lan Huang, 2020 .

Rear Interface Modification by the ZnTe Layer Enables High-Efficient Cu2(Zn,Cd)SnS4 Thin-Film Solar Cells

Xudong Xiao, Jianmin Li, Lan Huang, 2021, ACS Applied Energy Materials.

Effects of substrate orientation and solution movement in chemical bath deposition on Zn(O,S) buffer layer and Cu(In,Ga)Se2 thin film solar cells

J. Hou, Xudong Xiao, Junbo Gong, 2019, Nano Energy.

Effects of Ammonia-Induced Surface Modification of Cu(In,Ga)Se2 on High-Efficiency Zn(O,S)-Based Cu(In,Ga)Se2 Solar Cells

Xiaomin Wang, Chunlei Yang, Xudong Xiao, 2019, Solar RRL.

Fabrication of CZTS thin films and solar cells via single-step Co-evaporation method

Jianmin Li, Lan Huang, Shijin Wang, 2022, Materials Science in Semiconductor Processing.

Role of surface microstructure of Mo back contact on alkali atom diffusion and Ga grading in Cu(In,Ga)Se2 thin film solar cells

Z. Ding, Xudong Xiao, Junbo Gong, 2019, Energy Science & Engineering.

Selenization of mixed metal oxides for dense and ZnSe-free Cu2ZnSnSe4 absorber films

Weifeng Liu, Jianmin Li, G. Jiang, 2014 .

Failure and Recovery Modes of Submicron Cu(In,Ga)Se2 Solar Cells with High Cu Content.

Xudong Xiao, Yifan Kong, Jianmin Li, 2020, ACS applied materials & interfaces.

Formation of Ga double grading in submicron Cu(In,Ga)Se2 solar cells by pre-depositing a CuGaSe2 layer

Xudong Xiao, Yifan Kong, Jianmin Li, 2020, Journal of Materials Chemistry A.

High‐Efficiency Sb2(S,Se)3 Solar Cells with New Hole Transport Layer‐Free Back Architecture via 2D Titanium‐Carbide Mxene

Limei Lin, Zhigao Huang, Jianmin Li, 2021, Advanced Functional Materials.

Traces of iron impurities in copper sources can be a poison to Cu(In, Ga)Se 2 solar cells

Junbo Gong, Jianmin Li, Xinxing Liu, 2021, Nano Select.

Ambient-Air Sulfurization Process for Cu2ZnSnS4 Thin Film Solar Cells: Self-Creating Inert Atmosphere Using Sulfur Vapor

Limei Lin, Zhigao Huang, Xiangkai Kong, 2019, ACS Applied Energy Materials.

Highly efficient wide-band-gap perovskite solar cells fabricated by sequential deposition method

Xudong Xiao, Junbo Gong, Jianmin Li, 2021 .

Efficient and stable all-inorganic Sb2(S, Se)3 solar cells via manipulating energy levels in MnS hole transporting layers.

Junbo Gong, Jianmin Li, L. Yao, 2021, Science bulletin.

Regulating Energy Band Alignment via Alkaline Metal Fluoride Assisted Solution Post‐Treatment Enabling Sb2(S,Se)3 Solar Cells with 10.7% Efficiency

Junbo Gong, Jianmin Li, R. Tang, 2021, Advanced Energy Materials.

Hydrazine Hydrate‐Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%‐Efficient Sb2(S,Se)3 Planar Solar Cells

Junbo Gong, Jianmin Li, Xudong Xiao, 2022, Advanced science.

Double-Sided Heat-Exchange CBD System for Homogeneous Zn(O,S) Thin Films in Highly Efficient CIGS Solar Devices

Xudong Xiao, Junbo Gong, Yifan Kong, 2020, ACS Applied Energy Materials.

Bi doping of Sb2S3 light-harvesting films: toward suitable energy level alignment and broad absorption for solar cells

Jianmin Li, Jianmin Zhang, Lili Yao, 2022, Chemical Engineering Journal.

Front and Back contact engineering for high-efficient and low-cost hydrothermal derived Sb2(S, Se)3 solar cells by using FTO/SnO2 and carbon

Limei Lin, Hui Liu, Zhigao Huang, 2020 .

Manipulating Back Contact Enables Over 8%-Efficient Carbon-Based Sb2(S,Se)3 Solar Cells

Jianmin Li, Y. Ma, L. Yao, 2022, SSRN Electronic Journal.

A Novel Multi‐Sulfur Source Collaborative Chemical Bath Deposition Technology Enables 8%‐Efficiency Sb2S3 Planar Solar Cells

Junbo Gong, Jianmin Li, R. Tang, 2022, Advanced materials.

Manipulating Ga growth profile enables all-flexible high-performance single-junction CIGS and 4T perovskite/CIGS tandem solar cells

Junbo Gong, Jianmin Li, Hui Yan, 2022, Chemical Engineering Journal.

Mixed Solvents Assisted Post‐Treatment Enables High‐Efficiency Single‐Junction Perovskite and 4T Perovskite/CIGS Tandem Solar Cells

Junbo Gong, Jianmin Li, Xinxing Liu, 2022, Advancement of science.

Rubidium Fluoride Assisted High-efficiency Cu2(Zn,Cd)SnS4 Solar Cells by Co-evaporation/annealing Method

Jianmin Li, Guilin Chen, Z. Ye, 2021, Journal of Materials Chemistry A.

Highly oriented GeSe thin film: self-assembly growth via the sandwiching post-annealing treatment and its solar cell performance.

Jianmin Li, Huiling Cai, L. Yao, 2019, Nanoscale.

Unraveling the influence of interface defects on antimony trisulfide solar cells

Jianmin Li, Qianqian Lin, Ti Wang, 2022, Journal of Energy Chemistry.

A liquid medium annealing strategy for highly [041]/[141]-oriented planar antimony sulfide solar cells with 7.23% efficiency

Jianmin Li, Shuiyuan Chen, Zhipeng Huang, 2023, Nano Energy.

Zn(O,S) Buffer Layer for in Situ Hydrothermal Sb2S3 Planar Solar Cells.

Jianmin Li, L. Yao, Guilin Chen, 2021, ACS applied materials & interfaces.

Effects of Laser‐Scribed Mo Groove Shape on Highly Efficient Zn(O,S)‐Based Cu(In,Ga)Se 2 Solar Modules

Qiang Li, Xudong Xiao, Yifan Kong, 2020, Solar RRL.

Molten Salts Assisted Interfacial Engineering for Efficient and Low‐Cost Full‐Inorganic Antimony Sulfide Solar Cells

Peng Tang, Jianmin Li, Shuiyuan Chen, 2022, Advanced Functional Materials.

Solvent‐Assisted Hydrothermal Deposition Approach for Highly‐Efficient Sb2(S,Se)3 Thin‐Film Solar Cells

Junbo Gong, Jianmin Li, Guilin Chen, 2023, Advanced Energy Materials.

Zinc-based electron transport materials for over 9.6%-efficient S-rich Sb2(S,Se)3 solar cells

Junbo Gong, Jianmin Li, Guilin Chen, 2021 .

Regulating Deposition Kinetics via A Novel Additive-assisted Chemical Bath Deposition Technology Enables 10.57%-efficient Sb2Se3 Solar Cells

Junbo Gong, Jianmin Li, R. Tang, 2022, Energy & Environmental Science.

Rear Interface Modification by the ZnTe Layer Enables High-Efficient Cu2(Zn,Cd)SnS4 Thin-Film Solar Cells

Jianmin Li, Lan Huang, Shijin Wang, 2021, ACS Applied Energy Materials.