Dipankar Bhanja

发表

Performance Evaluation and Simulation of Solar Panel , Wind Mill , Fuel Cell Hybrid System for Small Scale Energy Harvesting

Dipankar Bhanja, Agnimitra Biswas, Puneet Kumar Saini, .

Performance analysis of a two bladed Savonius water turbine cluster for perennial river-stream application at low water speeds

A. Biswas, Dipankar Bhanja, T. S. Rengma, 2021, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

Effects of elasticity number and time constant ratio on breakup and droplet formation of viscoelastic planar liquid sheet co-flowing with gases of equal velocities

Dipankar Bhanja, D. Dasgupta, Saurabh Sharma, 2021, Journal of Fluid Mechanics.

Thermal analysis of porous pin fin used for electronic cooling

Dipankar Bhanja, B. Kundu, P. Mandal, 2013 .

A novel optimum constructal fork-shaped fin array design for simultaneous heat and mass transfer application in a space-constrained situation

Saheera Azmi Hazarika, Dipankar Bhanja, Sujit Nath, 2020 .

A modified firefly algorithm to maximize heat dissipation of a rectangular porous fin in heat exchangers exposed to both convective and radiative environment

Saheera Azmi Hazarika, Dipankar Bhanja, Ratnadeep Nath, 2019, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Effect of Knurled Fin Surface on Thermal Performance of Perforated Fin Heat Sink

Dipankar Bhanja, P. K. Patowari, Ambarish Maji, 2019, Journal of Thermophysics and Heat Transfer.

Numerical investigation on heat transfer enhancement of heat sink using perforated pin fins with inline and staggered arrangement

Dipankar Bhanja, Promod Kumar Patowari, Dipankar Bhanja, 2017 .

Experimental and numerical investigation of square heat sink having staggered and inline pin fin arrays placed at different orientation

Dipankar Bhanja, S. Sengupta, S. C. Rana, 2021, Journal of Mechanical Science and Technology.

Application of metaheuristic algorithms in optimum thermal design analysis of a rectangular porous fin subjected to both insulated and convective tip conditions

Dipankar Bhanja, S. Nath, T. Deshamukhya, 2020 .

Thermal design parameters of a wet T-shaped fin for linear variation of humidity ratio with saturation temperature

Saheera Azmi Hazarika, Dipankar Bhanja, B. Kundu, 2018 .

Heat transfer enhancement through porous fins: A comprehensive review of recent developments and innovations

Dipankar Bhanja, S. Nath, T. Deshamukhya, 2020 .

Numerical investigation for the optimal placements of rectangular vortex generators for improved thermal performance of fin-and-tube heat exchangers

Dipankar Bhanja, S. Nath, Aabir Das, 2018 .

Linear stability analysis of planar liquid sheet with unequal gas velocities confined between two solid walls

Dipankar Bhanja, D. Dasgupta, S. Nath, 2017 .

Numerical investigation to predict optimum attack angle combination of longitudinal vortex generators in compact heat exchangers for thermo-hydraulic heightened performance

Dipankar Bhanja, S. Nath, M. Zeeshan, 2019 .

Accurate predictions for optimum design of a T-shaped fin under an actual wet load condition

Saheera Azmi Hazarika, Dipankar Bhanja, B. Kundu, 2017 .

Performance enhancement of a dual heat pipe array based evacuated tube solar water heater for north eastern India climatic condition: A numerical approach

Dipankar Bhanja, S. Nath, Bhaskar Ranjan Tamuli, 2022, Applied Thermal Engineering.

Thermal performance analysis of a co-axial evacuated tube collector with single and two-phase flow consideration under North-eastern India climatic condition

Dipankar Bhanja, S. Nath, Saranga Sekhar Saikia, 2020 .

Thermal analysis of a constructal T-shaped porous fin with simultaneous heat and mass transfer

Saheera Azmi Hazarika, Dipankar Bhanja, S. Nath, 2017 .

A study on dual role of viscosity on the stability of a viscous planar liquid sheet surrounded by inviscid gas streams of equal velocities, and prediction of resulting droplet distribution using maximum entropy formulation

Dipankar Bhanja, D. Dasgupta, S. Nath, 2019, Physics of Fluids.

Geometric optimization and performance study of a constructal T-shaped fin under simultaneous heat and mass transfer

Saheera Azmi Hazarika, Dipankar Bhanja, B. Kundu, 2016 .

Influence of aging and body location on the thermal performance of firefighter's clothing exposed to radiant heat source

R. Misra, Dipankar Bhanja, S. Nath, 2023, International Journal of Thermal Sciences.

Linear Instability Analysis of Viscous Planar Liquid Sheet Sandwiched Between Two Moving Gas Streams

Dipankar Bhanja, D. Dasgupta, S. Nath, 2020 .

Theoretical evolution of thermal behaviour of Ti-6Al-4V subjected to selective laser melting: A powder free approach

Dipankar Bhanja, S. Narendranath, J. Dutta, 2023, Optik.

Unveiling the melting phenomena of PCM in a latent heat thermal storage subjected to temperature fluctuating heat source

Dipankar Bhanja, S. Nath, B. R. Tamuli, 2021 .

Enhancement of heat transfer from a continuously moving porous fin exposed in convective-radiative environment

Dipankar Bhanja, Balaram Kundu, Abdul Aziz, 2014 .

A model on the basis of analytics for computing maximum heat transfer in porous fins

Dipankar Bhanja, Balaram Kundu, Kwan-Soo Lee, 2012 .

Thermal analysis of a constructal T-shaped porous fin with radiation effects

Dipankar Bhanja, Balaram Kundu, Dipankar Bhanja, 2011 .

An analytical prediction for performance and optimum design analysis of porous fins

Dipankar Bhanja, Balaram Kundu, Dipankar Bhanja, 2011 .

Performance and optimization analysis of a constructal T-shaped fin subject to variable thermal conductivity and convective heat transfer coefficient

Dipankar Bhanja, Balaram Kundu, Dipankar Bhanja, 2010 .

Effect of nanofluid on thermo hydraulic performance of double layer tapered microchannel heat sink used for electronic chip cooling

Dipankar Bhanja, S. Nath, Avinash Kumar, 2018 .

Numerical study to predict optimal configuration of fin and tube compact heat exchanger with various tube shapes and spatial arrangements

Dipankar Bhanja, Sujit Nath, Mohd Zeeshan, 2017 .

An optimization study to investigate non-linearity in thermal behaviour of porous fin having temperature dependent internal heat generation with and without tip loss

Saheera Azmi Hazarika, Dipankar Bhanja, Sujit Nath, 2019, Commun. Nonlinear Sci. Numer. Simul..

Prediction of optimum design variables for maximum heat transfer through a rectangular porous fin using particle swarm optimization

Saheera Azmi Hazarika, Dipankar Bhanja, Sujit Nath, 2018, Journal of Mechanical Science and Technology.

Numerical Modelling and Thermohydraulic Analysis of Circular Pipe Having Internal Vortex Generators

Dipankar Bhanja, S. Nath, M. Zeeshan, 2021 .

Numerical Analysis OF PCM Within a Square Enclosure Having Different Wall Heating Conditions

Dipankar Bhanja, Pallab Bhattacharjee, S. Nath, 2021 .

Heat Source Conditions and PCM Chamber Orientation Effect on the Performance of a Latent Heat Thermal Energy Storage System

Dipankar Bhanja, S. Nath, B. R. Tamuli, 2022, Proceeding of Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India.

Cost, reliability, and sensitivity of a stand-alone hybrid renewable energy system—A case study on a lecture building with low load factor

Dipankar Bhanja, S. Gangwar, A. Biswas, 2015 .

Radiation effect on optimum design analysis of a constructal T-shaped fin with variable thermal conductivity

Dipankar Bhanja, Balaram Kundu, Dipankar Bhanja, 2012 .

Thermal design parameters of a wet T-shaped fin for linear variation of humidity ratio with saturation temperature

Saheera Azmi Hazarika, Dipankar Bhanja, B. Kundu, 2018, Journal of Mechanical Science and Technology.

Analytical solution to predict performance and optimum design parameters of a constructal T-shaped fin with simultaneous heat and mass transfer

Saheera Azmi Hazarika, Dipankar Bhanja, Sujit Nath, 2015 .

A metaheuristic analysis of heat transfer rates through porous fins of tapered and step profiles: a comparative study

Dipankar Bhanja, Sujit Nath, Tuhin Deshamukhya, 2021, Neural Computing and Applications.

Optimization of constructal T-shaped porous fins under convective environment using Swarm Intelligence Algorithms

Dipankar Bhanja, Sujit Nath, Tuhin Deshamukhya, 2020 .

Optimal Design of Constructal T-Shaped Fin Under Partially Wet Condition for Enhanced Thermal Performance: An Analytical Approach

Saheera Azmi Hazarika, Dipankar Bhanja, S. Nath, 2020, Heat Transfer Engineering.

Local thermal non-equilibrium bioheat transfer model for interstitial hyperthermia treatment of tumour cell: A numerical approach.

Dipankar Bhanja, S. Nath, Jnanaranjan Acharya, 2022, Journal of Thermal Biology.

Fork-shaped constructal fin array design a better alternative for heat and mass transfer augmentation under dry, partially wet and fully wet conditions

Saheera Azmi Hazarika, Dipankar Bhanja, S. Nath, 2020, International Journal of Thermal Sciences.

A novel optimal constructal fork-shaped fin array design to ascertain thermo-heightened performance under dehumidifying conditions

Saheera Azmi Hazarika, Dipankar Bhanja, S. Nath, 2019, International Journal of Thermal Sciences.

Thermal Analysis for Heat Transfer Enhancement in Perforated Pin Fins of Various Shapes with Staggered Arrays

Dipankar Bhanja, P. K. Patowari, B. Kundu, 2019 .

Effect of orientation angle in thermal performance analysis of a horizontal heat sink of perforated pin fins

Dipankar Bhanja, S. Sengupta, P. Mandal, 2019, 1ST INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND NANOTECHNOLOGY (ICAMEN 2019).

Computational investigation of heat transfer analysis through perforated pin fins of different materials

Gautam Choubey, Dipankar Bhanja, P. K. Patowari, 2017 .

Analytical study of temperature distribution in a rectangular porous fin considering both insulated and convective tip

Gautam Choubey, Dipankar Bhanja, S. Nath, 2017 .

Determination of optimum winglet height of longitudinal vortex generators for the best thermo-hydraulic performance of compact heat exchangers

Dipankar Bhanja, S. Nath, M. Zeeshan, 2019, Journal of Mechanical Science and Technology.

Enhanced thermo-hydraulic performance with two-phase flow boiling in wavy microchannel heat sink – A numerical investigation

Dipankar Bhanja, Santanu Borah, 2023, Numerical Heat Transfer, Part A: Applications.

A modified model to assess the thermal protective performance of fire-retardant clothing exposed to both flame and radiant source

Dipankar Bhanja, Rahul Dev Misra, Jnanaranjan Acharya, 2024, Applied Thermal Engineering.