H. Dam

发表

Manufacture and demonstration of organic photovoltaic‐powered electrochromic displays using roll coating methods and printable electrolytes

John R. Reynolds, Frederik C. Krebs, Henrik Friis Dam, 2012 .

The effect of mesomorphology upon the performance of nanoparticulate organic photovoltaic devices

F. Krebs, Xiaojing Zhou, W. Belcher, 2015 .

Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules

F. Krebs, D. Tanenbaum, H. Hoppe, 2012 .

Fast and direct measurements of the electrical properties of graphene using micro four-point probes

T. Booth, P. Bøggild, D. H. Petersen, 2011, Nanotechnology.

Productivity, surface quality and tolerances in ultrasonic machining of ceramics

H. Dam, P. Quist, M. P. Schreiber, 1995 .

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

Suren A. Gevorgyan, Mikkel Jørgensen, Christoph J. Brabec, 2014 .

Probing individal subcells of fully printed and coated polymer tandem solar cells using multichromatic opto-electronic characterization methods

Mikkel Jørgensen, Frederik C. Krebs, Henrik Friis Dam, 2015 .

The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices

Suren A. Gevorgyan, Ronn Andriessen, Yulia Galagan, 2012 .

Solvent-resistant small molecule solar cells by roll-to-roll fabrication via introduction of azide cross-linkable group

F. Krebs, Hongzheng Chen, E. Bundgaard, 2014 .

Improving organic tandem solar cells based on water-processed nanoparticles by quantitative 3 D nanoimagingWater-processed organic tandem solar cells improved by quantitative 3 D nanoimaging

A. Diaz, M. Guizar‐Sicairos, F. Krebs, 2015 .

In situ X-ray scattering of perovskite solar cell active layers roll-to-roll coated on flexible substrates

F. Krebs, K. Norrman, H. Dam, 2016 .

Simple roll coater with variable coating and temperature control for printed polymer solar cells

Frederik C. Krebs, Henrik Friis Dam, F. Krebs, 2012 .

In-line, roll-to-roll morphology analysis of organic solar cell active layers

F. Krebs, H. Dam, Martin Helgesen, 2017 .

On the stability of a variety of organic photovoltaic devices by IPCE and in situ IPCE analyses--the ISOS-3 inter-laboratory collaboration.

Ronn Andriessen, Yulia Galagan, Mikkel Jørgensen, 2012, Physical chemistry chemical physics : PCCP.

THE OUTCOME OF THE ISOS-3 INTER-LABORATORY COLLABORATION – CHARACTERIZATION OF DEGRADATION PATHWAYS OCCURRING IN A VARIETY OF ORGANIC PHOTOVOLTAIC DEVICES

Gülşah Y. Uzunoğlu, F. Krebs, D. Germack, 2016 .

Round-robin studies on roll-processed ITO-free organic tandem solar cells combined with inter-laboratory stability studies

F. Krebs, C. Brabec, E. Bundgaard, 2015 .

Roll-to-Roll Processing of Inverted Polymer Solar Cells using Hydrated Vanadium(V)Oxide as a PEDOT:PSS Replacement

F. Krebs, D. Tanenbaum, N. Espinosa, 2011, Materials.

Medium area, flexible single and tandem junction solar cells based on roll coated semi-random copolymers

F. Krebs, B. Thompson, H. Dam, 2014 .

Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating

Frederik C. Krebs, Henrik F. Dam, Andreas Sandström, 2012, Nature Communications.

TOF-SIMS investigation of degradation pathways occurring in a variety of organic photovoltaic devices--the ISOS-3 inter-laboratory collaboration.

Ronn Andriessen, Yulia Galagan, Mikkel Jørgensen, 2012, Physical chemistry chemical physics : PCCP.

Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration

Suren A. Gevorgyan, Yulia Galagan, Mikkel Jørgensen, 2012 .

Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: Stability over 10,000 h

Suren A. Gevorgyan, Mikkel Jørgensen, Frederik C. Krebs, 2013 .

Improving organic tandem solar cells based on water-processed nanoparticles by quantitative 3D nanoimaging.

A. Diaz, M. Guizar‐Sicairos, F. Krebs, 2015, Nanoscale.

All‐Solution‐Processed, Ambient Method for ITO‐Free, Roll‐Coated Tandem Polymer Solar Cells using Solution‐Processed Metal Films

Jørgen Stubager, Frederik C. Krebs, Henrik Friis Dam, 2014 .

Roll and roll-to-roll process scaling through development of a compact flexo unit for printing of back electrodes

Frederik C. Krebs, Henrik Friis Dam, Thomas Rieks Andersen, 2015 .

Enabling Flexible Polymer Tandem Solar Cells by 3D Ptychographic Imaging

Mikkel Jørgensen, Roar R. Søndergaard, Frederik C. Krebs, 2015 .

The influence of additives on the morphology and stability of roll-to-roll processed polymer solar cells studied through ex situ and in situ X-ray scattering

Mikkel Jørgensen, Frederik C. Krebs, Henrik Friis Dam, 2014 .

Development of Lab‐to‐Fab Production Equipment Across Several Length Scales for Printed Energy Technologies, Including Solar Cells

Markus Hösel, Frederik C. Krebs, Henrik Friis Dam, 2015 .

In situ monitoring of structure formation in the active layer of polymer solar cells during roll-to-roll coating

Frederik C. Krebs, Henrik Friis Dam, Jens Wenzel Andreasen, 2014 .

Ambient roll-to-roll fabrication of flexible solar cells based on small molecules

Frederik C. Krebs, Henrik Friis Dam, Thomas Rieks Andersen, 2013 .

A rational method for developing and testing stable flexible indium- and vacuum-free multilayer tandem polymer solar cells comprising up to twelve roll processed layers

Suren A. Gevorgyan, Mikkel Jørgensen, Markus Hösel, 2014 .

Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration

Gülşah Y. Uzunoğlu, F. Krebs, Y. Galagan, 2012 .

On the stability of a variety of organic photovoltaic devices by IPCE and in situ IPCE analyses--the ISOS-3 inter-laboratory collaboration.

David S. Germack, Gülşah Y. Uzunoğlu, Y. Galagan, 2012, Physical chemistry chemical physics : PCCP.

Improving organic tandem solar cells based on water-processed nanoparticles by quantitative 3D nanoimaging.

M. Guizar‐Sicairos, K. Thydén, H. Dam, 2015, Nanoscale.

Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration

David S. Germack, Gülşah Y. Uzunoğlu, F. Krebs, 2012 .