J. H. Kim

发表

Hydrogen production by splitting water on solid acid materials by thermal dissociation

Young-Sang Cho, J. H. Kim, Ju Hee Kim, 2011 .

Effects of simulation parameters on residual stresses for laser shock peening finite element analysis

Yun‐Jae Kim, J. H. Kim, J. Kim, 2013 .

Effects of a current treatment for an in-situ sintered cathode in a Ni-supported solid oxide fuel cell

Young Min Park, J. H. Kim, Haekyoung Kim, 2012 .

A bi-layer cathode based on lanthanum based cobalt- and iron-containing perovskite and gadolinium doped ceria for thin yttria stabilized zirconia electrolyte solid oxide fuel cells

J. H. Kim, Haekyoung Kim, Yong-il Park, 2012 .

Ce0.9Gd0.1O1.95 supported La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes for solid oxide fuel cells

J. H. Kim, Haekyoung Kim, 2012 .

Characterizations of composite cathodes with La0.6Sr0.4Co0.2Fe0.8O3−δ and Ce0.9Gd0.1O1.95 for solid oxide fuel cells

Young Min Park, J. H. Kim, Haekyoung Kim, 2012, Korean Journal of Chemical Engineering.

High-Performance composite cathodes for solid oxide fuel cells

Young Min Park, J. H. Kim, Haekyoung Kim, 2011 .

Nano-structured cathodes based on La0.6Sr0.4Co0.2Fe0.8O3−δ for solid oxide fuel cells

Young Min Park, J. H. Kim, Haekyoung Kim, 2011 .

Sensitivity analysis of finite element parameters for estimating residual stress of J-groove weld in RPV CRDM penetration nozzle

Yun‐Jae Kim, J. H. Kim, Sung Ho Lee, 2012 .

Numerical Study of Laser Shock Peening Effects on Alloy 600 Nozzles with Initial Residual Stresses

Yun‐Jae Kim, J. H. Kim, Ji Soo Kim, 2017 .

Effects of Failure Mode II on Crack Initiation and Crack propagation Steps Using Multilevel Fatigue Loading Test

J. H. Kim, S. Hong, Sae Min Park, 2017 .

In situ sinterable cathode with nanocrystalline La0.6Sr0.4Co0.2Fe0.8O3−δ for solid oxide fuel cells

Young Min Park, J. H. Kim, Haekyoung Kim, 2011 .

Synthesis and dielectric properties of photoreactive polystyrene containing [1‐(3‐isopropenyl‐phenyl)‐1‐methyl‐ethyl]‐carbamate in the side chain

Young Kwan Kim, Donghoon Choi, Jung‐Il Jin, 2008 .

A novel precursor for the sol–gel and CVD methods to prepare alumina permselective membranes

G. Choi, S. Sim, Joong-Kee Lee, 1998 .

TestEvaluation of Failure Modes and Adhesion of DLC Films by Scratch Test

J. H. Kim, H. Ahn, Chanhyung Park, 2017 .

Bisethylacetoacetato Cu(II) as a novel metal-organic precursor for Cu film production by plasma-enhanced chemical vapor deposition toward ultra-large-scale integration metallization

G. Choi, Hyungsoo Choi, J. H. Kim, 1996 .

Characterizations of impedance responses in an anode-supported solid oxide fuel cell with an air blowing system

Young Min Park, J. H. Kim, Haekyoung Kim, 2012, Korean Journal of Chemical Engineering.

New growth method of rubrene single crystal for organic field-effect transistor

J. Joo, C. Hong, J. H. Kim, 2007 .

A microfluidic application for mass production of drug-loaded polymeric microspheres for a long-acting injectable with IVL-DrugFluidic®, a novel microfluidic microsphere manufacturing platform technology

C. Chon, J. H. Kim, Jiwoong Choi, 2023, OpenNano.

Study on Mitigation Method of Solder Corrosion for Crystalline Silicon Photovoltaic Modules

Jongsung Park, Nochang Park, J. H. Kim, 2014 .

Three-dimensional finite element welding residual stress analysis of penetration nozzles: I – Sensitivity of analysis variables

Yun-Jae Kim, Yun‐Jae Kim, J. H. Kim, 2014 .

Effects of axial misalignments on the torque specimens using finite element analysis

Yun-Jae Kim, Ju Hee Kim, Yong Hak Huh, 2011 .

Effects of repair weld of reactor pressure vessel upper head control rod drive mechanism penetration nozzle on J-Groove weldment using finite element analysis

Yun‐Jae Kim, J. H. Kim, Sam-hyeon Yoo, 2014 .

Sensitivity Analysis of Nozzle Geometry Variables for Estimating Residual Stress in RPV CRDM Penetration Nozzle

Yun‐Jae Kim, Kwon-Hee Kim, J. H. Kim, 2013 .