Tingju Li

发表

Optimization of the acid leaching process by using an ultrasonic field for metallurgical grade silicon

Z. Jian, Tingju Li, Ma Xiaodong, 2009 .

Study on horizontal electromagnetic continuous casting of CuNi10Fe1Mn alloy hollow billets

Tingju Li, Z. Yan, X. N. Li, 2009 .

Real time observation on the solidification of strontium-modified zinc–aluminum–silicon alloys by synchrotron microradiography

Q. Han, Tongmin Wang, Tingju Li, 2014 .

A multi-component AlCrFe2Ni2 alloy with excellent mechanical properties

Tongmin Wang, Tingju Li, Yong Dong, 2016 .

A novel fading-resistant Al-3Ti-3B grain refiner for Al-Si alloys

Tongmin Wang, Zongning Chen, Tingju Li, 2012 .

Controlling the solidification process parameters of direct energy deposition additive manufacturing considering laser and powder properties

Zhaodong Zhang, P. Ge, Tingju Li, 2020 .

Effect of plasma remelting on microstructure and properties of a CoCrCuNiAl0.5 high-entropy alloy prepared by spark plasma sintering

H. Cui, Tingju Li, Yiping Lu, 2021, Journal of Materials Science.

A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures

P. Liaw, Tongmin Wang, Tingju Li, 2021 .

A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys

Huijun Kang, Tongmin Wang, Tingju Li, 2014, Scientific Reports.

Effect of vanadium addition on the microstructure and properties of AlCoCrFeNi high entropy alloy

Tongmin Wang, Tingju Li, Yong Dong, 2014 .

Molecular dynamics study on diamond nanowires mechanical properties: Strain rate, temperature and size dependent effects

R. Melnik, Tingju Li, B. Wen, 2011 .

A high strength and high electrical conductivity Cu-Cr-Zr alloy fabricated by cryorolling and intermediate aging treatment

Wei Wang, Huijun Kang, Tongmin Wang, 2017 .

Phase Evolution and Properties of Al2CrFeNiMox High-Entropy Alloys Coatings by Laser Cladding

Hui Jiang, Zhiqiang Cao, Tongmin Wang, 2015, Journal of Thermal Spray Technology.

Fluorescent Fluid in 3D‐Printed Microreactors for the Acceleration of Photocatalytic Reactions

Shengyang Tao, Tingju Li, Zhigang Zhu, 2019, Advanced science.

Composition design and laser cladding of Ni–Zr–Al alloy coating on the magnesium surface

Tingju Li, Cun-shan Wang, Yongzhe Chen, 2009 .

Laser cladding of eutectic-based Ti–Ni–Al alloy coating on magnesium surface

C. Dong, Tingju Li, Cun-shan Wang, 2010 .

In situ infiltration behavior and interfacial microstructure evolution between Al and carbon fibers

Shichao Liu, Tongmin Wang, Zhongkai Guo, 2021 .

A novel ZrNbMoTaW refractory high-entropy alloy with in-situ forming heterogeneous structure

P. Liaw, Tongmin Wang, E. Guo, 2021, Materials Science and Engineering: A.

Effect of minor B addition on microstructure and properties of AlCoCrFeNi multi-compenent alloy

Tongmin Wang, Tingju Li, Yong Dong, 2015 .

Effect of immersion Ni plating on interface microstructure and mechanical properties of Al/Cu bimetal

Tingju Li, Z. Cao, Fei Chen, 2014 .

Removal of metallic impurities in metallurgical grade silicon by directional solidification

Tingju Li, Xiaodong Ma, G. Zhang, 2010 .

Hydrometallurgical purification of metallurgical grade silicon

Tongmin Wang, Tingju Li, Xiaodong Ma, 2009 .

Investigation of elastic modulus and morphology of reinforcement phase on the stress distribution of copper matrix composites

Shichao Liu, Tingju Li, J. Jie, 2021 .

Effect of B4C particle size on the mechanical properties of B4C reinforced aluminum matrix layered composite

Tongmin Wang, Tingju Li, Guangye Xu, 2018, Science and Engineering of Composite Materials.

A promising new class of plasticine: Metallic plasticine

Tongmin Wang, Zongning Chen, Tingju Li, 2017 .

Mechanical Properties Improvement of AlCrFeNi2Ti0.5 High Entropy Alloy through Annealing Design and its Relationship with its Particle-reinforced Microstructures

Tongmin Wang, Tingju Li, Z. Cao, 2015 .

Microstructure and Mechanical Properties of a CoFeNi2V0.5Nb0.75 Eutectic High Entropy Alloy in As-cast and Heat-treated Conditions

Tingju Li, Z. Cao, Yiping Lu, 2016 .

Preparation of graphene/Al composites with a lamellar structure by silane cross-linking graphene oxide

Tongmin Wang, Y. Fu, Tingju Li, 2021, Journal of Materials Research and Technology.

Semisolid-rolling and annealing process of woven carbon fibers reinforced Al-matrix composites

Jiang Li, Tingju Li, Zhang Yubo, 2017 .

Liquid rolling of woven carbon fibers reinforced Al5083-matrix composites

Shichao Liu, Tingju Li, Yiping Lu, 2016 .

Surface Pretreatment and Fabrication Technology of Woven Carbon Fiber Cloth Aluminium Alloy Matrix Composite

Tongmin Wang, Tingju Li, Yong Dong, 2015 .

Fabrication of woven carbon fibers reinforced Al–Mg (95–5 wt%) matrix composites by an electromagnetic casting process

Shichao Liu, Tingju Li, Yong Dong, 2015 .

The mechanical and oxidation properties of novel B2-ordered Ti2ZrHf0.5VNb0.5Alx refractory high-entropy alloys

Junyang He, Tingju Li, Z. Cao, 2021, Materials Characterization.

A Novel Series of Refractory High-Entropy Alloys Ti2ZrHf0.5VNbx with High Specific Yield Strength and Good Ductility

Tingju Li, Z. Cao, Yiping Lu, 2019, Acta Metallurgica Sinica (English Letters).

Microstructure and mechanical properties of CxHf0.25NbTaW0.5 refractory high-entropy alloys at room and high temperatures

Tongmin Wang, Haitao Zhang, Tingju Li, 2022 .

Tuning deformation mechanisms of face-centered-cubic high-entropy alloys via boron doping

P. Liaw, Tingju Li, Yiping Lu, 2022, Journal of Alloys and Compounds.

Microstructure evolution and mechanical properties of CrFeNixV0.64Ta0.36 eutectic high-entropy alloys

Tongmin Wang, Tingju Li, Yiping Lu, 2021, Materials Characterization.

A novel as-cast precipitation-strengthened Al0.5V0.1FeCrMnNi0.9 high-entropy alloy with high strength and plasticity

Tingju Li, Huanzhi Zhang, Yiping Lu, 2021, Science China Technological Sciences.

Effect of carbon addition on the microstructure and mechanical properties of CoCrFeNi high entropy alloy

Tingju Li, Yiping Lu, Li Jiang, 2018 .

Microstructure and Properties of the Co2NiWV0.5Mo1.5, Co2NiWV0.5Mo2, and Co2NiWV1.0Mo2 Multi-Principal Elements Alloys

Tingju Li, Yiping Lu, Hui Jiang, 2017 .

Effects of Ta addition on the microstructures and mechanical properties of CoCrFeNi high entropy alloy

Tingju Li, Z. Cao, Yiping Lu, 2017 .

Microstructures and Mechanical Properties of Ni x CoCrFeMo 0.1 Multi-component Alloys

Tingju Li, Yiping Lu, Hui Jiang, 2017 .

Interfacial thermal resistance of 2D and 1D carbon/hexagonal boron nitride van der Waals heterostructures

Jun Yu, Zhenan Tang, Tingju Li, 2016 .

The superior hydrogen-generation performance of multi-component Al alloys by the hydrolysis reaction

P. Liaw, Tongmin Wang, Tingju Li, 2019, International Journal of Hydrogen Energy.

Preparation and characterization of nickel nano-Al2O3 composite coatings by sediment co-deposition

H. Yue, Tingju Li, K. Qi, 2008 .

Remarkable strength of a non-equiatomic Co29Cr29Fe29Ni12.5W0.5 high-entropy alloy at cryogenic temperatures

P. Liaw, Tongmin Wang, Tingju Li, 2021 .

Ductile and ultrahigh-strength eutectic high-entropy alloys by large-volume 3D printing

Tongmin Wang, Tingju Li, Zhiming Li, 2022, Journal of Materials Science & Technology.

Promising properties and future trend of eutectic high entropy alloys

P. Liaw, Tongmin Wang, Tingju Li, 2020, Scripta Materialia.

Effect of Mo and Ni elements on microstructure evolution and mechanical properties of the CoFeNixVMoy high entropy alloys

Tongmin Wang, Tingju Li, Z. Cao, 2015 .

Effects of alternating magnetic field and casting parameters on solidification structure and mechanical properties of copper hollow billets

Tingju Li, Z. Yan, Z. Cao, 2009 .

Separation of primary Si and impurity boron removal from Al-30%Si-10%Sn melt under a traveling magnetic field

Tingju Li, J. Jie, Jinlan Sun, 2016 .

Study of ultrahigh-purity copper billets refined by vacuum melting and directional solidification

Tingju Li, Yabo Fu, Yiping Lu, 2011 .

Purifying multicrystalline silicon by directional solidification method with induced electromagnetic field

Y. Zhang, D. H. Liu, Tingju Li, 2011 .

A promising new class of irradiation tolerant materials: Ti2ZrHfV0.5Mo0.2 high-entropy alloy

Chenyang Lu, Shijian Zheng, Tongmin Wang, 2019, Journal of Materials Science & Technology.

New two-step growth of microcrystalline silicon thin films without incubation layer

Tingju Li, Xueyu Zhang, A. Wu, 2011 .

Influence of rotating magnetic field on the microstructure and phase content of Ni–Al alloy

Lianhai Lu, Tingju Li, F. Bai, 2011 .

Research on Effects of Rolling-Drawing Deformation on Performance of Cu-10Ni-1Fe-1Mn Alloy

Tingju Li, Xinmin Zhou, Y. He, 2018 .

A Novel Series of Fe8.25CoCrNiMnNb0.1Mox Multi-Component Alloys with Excellent Combined Strength and Ductility

Tongmin Wang, Dehua Liu, Tingju Li, 2022, Journal of Materials Engineering and Performance.

Microstructure and mechanical properties of Ti3V2NbAl Ni low-density refractory multielement alloys

Tongmin Wang, Tingju Li, Yiping Lu, 2021 .

Tungsten-containing high-entropy alloys: a focused review of manufacturing routes, phase selection, mechanical properties, and irradiation resistance properties

Tongmin Wang, E. Guo, Tingju Li, 2021, Tungsten.

A promising structure for fabricating high strength and high electrical conductivity copper alloys

G. Fan, Huijun Kang, Tongmin Wang, 2016, Scientific Reports.

Novel strategy for fabrication of field-emission Ti5Si3 nanowires via casting-extraction method

Shichao Liu, Tingju Li, J. Jie, 2020 .

Study of enhanced dry sliding wear behavior and mechanical properties of Cu-TiB2 composites fabricated by in situ casting process

Wei Wang, Huijun Kang, Tongmin Wang, 2017 .

A novel high-entropy alloy with an exceptional combination of soft magnetic properties and corrosion resistance

Tongmin Wang, Tingju Li, Yiping Lu, 2022, Science China Materials.

A novel high-entropy alloy composite coating with core-shell structures prepared by plasma cladding

H. Cui, Tingju Li, Yiping Lu, 2020 .

Structure and refinement performance of Al-5Ti-0.2C master alloy produced via an improved self propagating synthesis approach

Tingju Li, J. Jie, Yubo Zhang, 2017, Metals and Materials International.

Study on Ru2Al5 prepared by mechanical alloying and subsequent heat treatment

Lianhai Lu, Tingju Li, K. Qi, 2009 .

n-diamond from catalysed carbon nanotubes: synthesis and crystal structure

C. Dong, Jijun Zhao, Tingju Li, 2005 .

Transformation mechanism from carbon nanotubes to n-diamond

C. Dong, Tingju Li, B. Wen, 2005 .

Relative stability of hydrogenated nanodiamond and nanographite from density function theory

Jijun Zhao, Tingju Li, B. Wen, 2007 .

Time-evolutional X-ray diffraction of n-diamond: An intermediate state between fcc and diamond structure

C. Dong, Jijun Zhao, Tingju Li, 2006 .

Preparation of diamond nanocrystals from catalysed carbon black in a high magnetic field

C. Dong, Tingju Li, Z. Cao, 2003 .

Effects of Ta Addition on the Microstructure and Mechanical Properties of CoCu0.5FeNi High-Entropy Alloy

Tongmin Wang, Tingting Xu, Tingju Li, 2019, Journal of Materials Engineering and Performance.

Effect of Ni-based conversion coating and Ni–P electroless plating on the bonding process of pure Al and AZ31 alloy

Y. Fu, Tingju Li, Z. Cao, 2014 .

Microstructure and mechanical properties of Al–1Mn and Al–10Si alloy circular clad ingot prepared by direct chill casting

Jong-Ho Kim, Y. Fu, Tingju Li, 2013 .

Effect of Sr addition on the characteristics of as-cast and rolled 3003/4004 clad aluminum

Tongmin Wang, Tingju Li, Feng Mao, 2016 .

Crystal growth and morphology evolution of D88 (Mn, Fe)5Si3 phase and its influence on the mechanical and wear properties of brasses

Shichao Liu, Tingju Li, J. Jie, 2017 .

Direct solidification of bulk ultrafine-microstructure eutectic high-entropy alloys with outstanding thermal stability

Tongmin Wang, Zheng Ren, Tingju Li, 2019, Scripta Materialia.

Electromagnetic self-encapsulation strategy to develop Al-matrix composite phase change material for thermal energy storage

N. Han, Tingju Li, X. An, 2021 .

Formation Mechanism of Three-Layer Solidified Structure in Commercial Purity Al During Solidification With a Forced Flow Field Induced by Pulsed Magnetic Field

Tingju Li, J. Jie, Xianlong Wang, 2022, Metallurgical and Materials Transactions A.

Characteristics evolution of 6009/7050 bimetal slab prepared by direct-chill casting process

Tongmin Wang, Tingju Li, Feng Mao, 2016 .

Influence of casting speed on fabricating Al-1%Mn and Al-10%Si alloy clad slab

Tingju Li, J. Jie, Jianbo Sun, 2017 .

Characteristics of clad aluminum hollow billet prepared by horizontal continuous casting

Y. Fu, Tingju Li, Yiping Lu, 2014 .

Investigation on the mechanical properties and frictional performance of Ni–Cu–Si alloy

Shichao Liu, Tongmin Wang, Tingju Li, 2020 .

Effect of aluminum addition on microstructure and properties of a novel nickel–silicon-containing brass

Z. Dong, Shichao Liu, Tingju Li, 2020, Journal of Materials Research.

Effect of pulsed magnetic field on the grain refinement and mechanical properties of 6063 aluminum alloy by direct chill casting

Lijuan Guo, Tingju Li, J. Jie, 2017, The International Journal of Advanced Manufacturing Technology.

Effect of pulsed magnetic field on the grain refinement and mechanical properties of 6063 aluminum alloy by direct chill casting

Shichao Liu, Lijuan Guo, Tingju Li, 2017 .

Grain refinement of hypoeutectic Al-Si alloys with B

G. Fan, Huijun Kang, Tongmin Wang, 2016 .

Grain Refinement of Pure Al by Inoculation and Rotating Magnetic Field

S. Li, Tingju Li, J. Jie, 2015 .

Effect of rotating magnetic field on the fading effect of Al–5Ti–1B in commercial pure Al

Tingju Li, J. Jie, Han Chen, 2014 .

A new strategy to design eutectic high-entropy alloys using mixing enthalpy

Hui Jiang, Sheng Guo, Zhiqiang Cao, 2017 .

CALPHAD-aided design for superior thermal stability and mechanical behavior in a TiZrHfNb refractory high-entropy alloy

P. Liaw, Tongmin Wang, Tingju Li, 2023, Acta Materialia.

Annealed microstructure dependent corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy

R. Ritchie, Jingjie Guo, Binbin Wang, 2021 .

Corrosion Behavior of New Tin-Brass Alloys with Slightly Different Zn Content in Salt Spray Environment

Tongmin Wang, Tingju Li, Pengchao Zhang, 2015 .

Electrochemical and Salt Spray Corrosion Behavior of Copper Alloy Contact Wires in Chloride Solution

Tongmin Wang, Tingju Li, Yong Dong, 2014 .

Three dimensional microstructures and wear resistance of Al-Bi immiscible alloys with different grain refiners

T. Xiao, Ya-nan Fu, Huijun Kang, 2015 .

Annealing effects on the microstructure and properties of bulk high-entropy CoCrFeNiTi0.5 alloy casting ingot

Tongmin Wang, Tingju Li, Z. Cao, 2014 .

Novel insight into dry sliding behavior of Cu-Pb-Sn in-situ composite with secondary phase in different morphology

Z. Dong, Tongmin Wang, Tingju Li, 2020 .

Effect of Sn addition on morphology evolution of secondary phase in hypomonotectic Cu-Pb-Sn alloy during solidification

Shichao Liu, Tingju Li, Y. Chen, 2019, Journal of Alloys and Compounds.

Solidification structure evolution of immiscible Al–Bi–Sn alloys at different cooling rates

Shichao Liu, Tingju Li, J. Jie, 2019, Journal of Materials Research.

Grain refining potency of Al-B master alloy on pure aluminum

Tongmin Wang, Y. Fu, Zongning Chen, 2011 .

Interfacial phase formation of Al-Cu bimetal by solid-liquid casting method

Y. Fu, Tingju Li, J. Jie, 2017 .

Preparation of nanostructured Ni/Al2O3 composite coatings in high magnetic field

Tingju Li, J. S. Zhang, Zhongtao Zhang, 2007 .

Investigation on the corrosion and oxidation resistance of Ni–Al2O3 nano-composite coatings prepared by sediment co-deposition

Changsheng Liu, Tingju Li, Haitao Teng, 2008 .

Structure, thermal and luminescence properties of Eu/Tb(BA)3phen/PAN fibers fabricated by electrospinning

Jingjing zhang, Tingju Li, Shiwei Wang, 2018 .

Development Status and Prospects of Advanced Copper Alloy

Tingju Li, Haofeng Xie, K. Song, 2020, Chinese Journal of Engineering Science.

Effects of electro-negativity on the stability of topologically close-packed phase in high entropy alloys

Yiping Lu, Tongmin Wang, Tingju Li, 2014 .

Microstructure and mechanical properties of multi-component AlCrFeNiMox high-entropy alloys

Yiping Lu, Tingju Li, Yong Dong, 2013 .

Surface modification for AlCoCrFeNi2.1 eutectic high-entropy alloy via laser remelting technology and subsequent aging heat treatment

Tongmin Wang, Tingju Li, Jun Wang, 2021, Journal of Alloys and Compounds.

Investigation on the corrosion and oxidation resistance of Ni-Al2O3 nano-composite coatings prepared by sediment co-deposition

Changsheng Liu, Tingju Li, Haitao Teng, 2009 .

Sediment Co-Deposition of Nanostructured Ni-Al2O3 Composite Coatings

H. Yue, Tingju Li, K. Qi, 2008 .

Microstructure and tribological properties of AlCrFe2Ni2W0.2Mo0.75 high-entropy alloy coating prepared by laser cladding in seawater, NaCl solution and deionized water

D. Deng, Huijun Kang, Tongmin Wang, 2020, Surface and Coatings Technology.

Effect of V addition on microstructures and mechanical properties of Cu-15Ni-8Sn alloy

Shichao Liu, Tongmin Wang, Zhongkai Guo, 2019, Materials Science and Engineering: A.

Study of the mechanical, structural, and electrical properties and annealing effect of a Cu–30Zn–1Ni–0.2Si alloy fabricated using cryogenic rolling

Pengfei Wang, Tingju Li, J. Jie, 2019, Materials Research Express.

Microstructure evolution and mechanical properties of Cu-3Ag-xZr alloys processed by equal channel angular pressing

Shichao Liu, Zhongkai Guo, Tingju Li, 2021, Journal of Alloys and Compounds.

Study on plastic behaviours of CuNi10Fe1Mn alloy tubes under cast-roll process

Ping Chen, Tingju Li, Z. Yan, 2009 .

Interfacial engineering of graphenic carbon electrodes by antimicrobial polyhexamethylene guanidine hydrochloride for ultrasensitive bacterial detection

Lingli Zhu, Yuan Chen, Tingju Li, 2020 .

Growth mechanism of primary Ti5Si3 phases in special brasses and their effect on wear resistance

Shichao Liu, Tingju Li, J. Jie, 2021 .

Effect of Amorphous Layer on the Microstructure and Properties of Al-B4C Layered Composite

P. Inácio, Tingju Li, J. Jie, 2019, International Journal of Engineering Trends and Technology.

Effect of La addition on the particle characteristics, mechanical and electrical properties of in situ Cu-TiB2 composites

Wei Wang, Huijun Kang, Tongmin Wang, 2016 .

Microstructure and refinement performance of Al-Ti-C master alloy: Effect of excess Ti on the growth and nucleating ability of TiC particles

Tingju Li, J. Jie, Yubo Zhang, 2017, Metals and Materials International.

Microstructure and Performance of a Three-Layered Al/7075–B4C/Al Composite Prepared by Semi Continuous Casting and Hot Rolling

Tongmin Wang, Y. Fu, Tingju Li, 2018, Metals.

Influence of Magnetic Field on the Microstructure and Properties of Cu-Ag-Zr Alloy

Tingju Li, J. Jie, Hang Li, 2015 .

First-principle studies of Al–Ru intermetallic compounds

Jijun Zhao, Tingju Li, B. Wen, 2008 .

Microstructure and texture evolution in the cryorolled CuZr alloy

Wei Wang, Huijun Kang, Tongmin Wang, 2017 .

Effect of Ti content on microstructure and properties of TixZrVNb refractory high-entropy alloys

Tongmin Wang, Tingju Li, Yiping Lu, 2020, International Journal of Minerals, Metallurgy and Materials.

Effect of aluminium content of AlxCrFe1·5Ni0·5 multiprincipal alloys on microstructure and alloy hardness

Tongmin Wang, Tingju Li, T. Wang, 2011 .

Investigation on Sub-Rapid Solidification Behavior of Semi-Solid Magnesium Alloy Metal

Tingju Li, B. Xiong, Haitao Teng, 2011 .

Mold-filling characteristics and solidification behavior of magnesium alloy in vacuum suction casting process

Tingju Li, Haitao Teng, K. Qi, 2009 .

Composition, Microstructure, Phase Constitution and Fundamental Physicochemical Properties of Low-Melting-Point Multi-Component Eutectic Alloys

Tongmin Wang, Tingju Li, Yiping Lu, 2017 .

Fabrication of carbon fibers reinforced Al-matrix composites in pulsed magnetic field

Y. Fu, Tingju Li, Yiping Lu, 2021 .

Effect of Rotating Magnetic Field (RMF) on Segregation of Solute Elements in CuNi10Fe1Mn Alloy Hollow Billet

Tingju Li, Z. Yan, Wenzhong Jin, 2012, Journal of Materials Engineering and Performance.

First-principles studies of Al–Ni intermetallic compounds

R. Melnik, Tingju Li, B. Wen, 2009 .

Enhancement of fiber–matrix adhesion in carbon fiber reinforced Al-matrix composites with an optimized electroless plating process

Shichao Liu, Zhongkai Guo, Y. Fu, 2021 .

Fabrication process and bending properties of carbon fibers reinforced Al-alloy matrix composites

Shichao Liu, Tingju Li, Yong Dong, 2016 .

Re-rolling technology and alloying-element distribution of carbon fibers reinforced Al-matrix composite

Tingju Li, Jiaming Liu, Yiping Lu, 2020 .

Electroless nickel plating and spontaneous infiltration behavior of woven carbon fibers

Shichao Liu, Tingju Li, Jiaming Liu, 2020 .

Interfacial enhancement and mechanical properties of CF/Al composites with improved interfacial structure induced by Al–Ni–Mg ternary reaction

Wei Wang, Shichao Liu, Tongmin Wang, 2022, Materials Science and Engineering: A.

Infiltration behavior and mechanism in semi-solid rolling of carbon fibers reinforced Al-matrix composite

Tingju Li, Jiaming Liu, Yiping Lu, 2019, Materials & Design.

Effect of Zr on the as-cast microstructure and mechanical properties of lightweight Ti2VNbMoZrx refractory high-entropy alloys

Tongmin Wang, Tingju Li, Yiping Lu, 2022, International Journal of Refractory Metals and Hard Materials.

Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range

Sheng Guo, Zhiqiang Cao, Yiping Lu, 2017 .

Effects of Fe Content on Microstructures and Properties of AlCoCrFexNi High-Entropy Alloys

Tingju Li, Yiping Lu, Li Jiang, 2015 .

Hot deformation behavior and microstructure evolution of non-equimolar Ti2ZrHfV0.5Ta0.2 refractory high-entropy alloy

Tongmin Wang, Tingju Li, Yiping Lu, 2022, Intermetallics.

Opportunity and Challenge of Refractory High-Entropy Alloys in the Field of Reactor Structural Materials

Tongmin Wang, Tingju Li, Z. Cao, 2020 .

A novel Co-free Al0.75CrFeNi eutectic high entropy alloy with superior mechanical properties

Tingju Li, Z. Cao, Yiping Lu, 2022, Journal of Alloys and Compounds.

Novel insight into precipitation behavior of γ’ phase particles in Cu–15Ni-xAl alloys through Calphad method

Z. Dong, Tongmin Wang, Tingju Li, 2020 .

Fabrication and Corrosion Resistance of Plasma-Sprayed Glass-Powder-Doped Al2O3-13 wt.%TiO2 Coatings

Zhixing Wang, Tingju Li, Hao Zhang, 2019, Journal of Thermal Spray Technology.

Microstructure analysis of rheoformed AZ91 alloy produced by rotating magnetic fields

Tingju Li, Haitao Teng, Xiao-li Zhang, 2008 .

A new concept of Al-Si alloy with core-shell structure as phase change materials for thermal energy storage

N. Han, Zhangfeng Shen, Tingju Li, 2019, Materials Letters.

Effects of interfacial diffusion induced infiltration process on the microstructure evolution and interfacial enhancement of CF/Mg composites

Shichao Liu, Tongmin Wang, Y. Fu, 2021 .

Effect of Sn addition on the separation and purification of primary Si from solidification of Al-30Si melt under electromagnetic stirring

Shichao Liu, Tongmin Wang, Tingju Li, 2017 .

Separation mechanism of the primary Si phase from the hypereutectic Al–Si alloy using a rotating magnetic field during solidification

Tongmin Wang, J. L. Sun, Tingju Li, 2014 .

Electromagnetic wave absorption properties of carbon powder from catalysed carbon black in X and Ku bands

C. Dong, Jijun Zhao, Tingju Li, 2006 .

Numerical analysis of effects of thickness on electromagnetic wave absorption properties of CPCCB/paraffin wax composite

C. Dong, Jijun Zhao, Tingju Li, 2006 .

Grain refinement and tensile properties improvement of aluminum foundry alloys by inoculation with Al–B master alloy

Tongmin Wang, Zongning Chen, Tingju Li, 2012 .

Grain refinement mechanism of pure aluminum by inoculation with Al–B master alloys

Tongmin Wang, Zongning Chen, Tingju Li, 2012 .

Energy transfer in and fluorescence studies of the Eu-Tb doped BPA-phen system

Jingjing zhang, Tingju Li, Guangbo Xie, 2019, Journal of Modern Optics.

A CALPHAD-MD coupled method to reveal the strengthening mechanism in precipitation-strengthening Cu-Ni-Al alloy with evolving microstructures

Tingju Li, J. Jie, Zhenpeng Wu, 2023, International Journal of Plasticity.

Effect of two-step cryorolling and aging on mechanical and electrical properties of a Cu–Cr–Ni–Si alloy for lead frames applications

Tongmin Wang, Tingju Li, J. Jie, 2020 .

Effect of cold rolling on aging precipitation behavior and mechanical properties of Cu–15Ni–8Sn alloy

Shichao Liu, Zhongkai Guo, Tingju Li, 2020 .

Precipitate phase transformation behavior, microstructure, and properties of Cu–Cr–Co–Si alloy

Tongmin Wang, Tingju Li, J. Jie, 2020, Journal of Materials Research.

An effective method to obtain Cu-35Zn alloy with a good combination of strength and ductility through cryogenic rolling

Chenbin Liu, Lijuan Guo, Tingju Li, 2018 .

Suppression of discontinuous precipitation in age-hardening Cu-15Ni-8Sn alloy by addition of V

Shichao Liu, Zhongkai Guo, Tingju Li, 2020 .

Effects of Co and Si additions and cryogenic rolling on structure and properties of Cu–Cr alloys

Pengfei Wang, Tongmin Wang, Tingju Li, 2019, Materials Science and Engineering: A.

Optimization of the balance between high strength and high electrical conductivity in CuCrZr alloys through two-step cryorolling and aging

Wei Wang, Huijun Kang, Tongmin Wang, 2019, Journal of Alloys and Compounds.

Effect of Ti Element on Microstructure and Properties of Cu-Cr Alloy

Tongmin Wang, Tingju Li, J. Jie, 2015 .

Microstructure evolution and magnetic properties of metastable immiscible Cu-Fe alloy with micro-alloying B element

Shichao Liu, Tingju Li, Yong Dong, 2021 .

Novel insight into evolution mechanism of second liquid-liquid phase separation in metastable immiscible Cu-Fe alloy

Shichao Liu, Tongmin Wang, Zhongkai Guo, 2018, Materials & Design.

Unveiling the mechanisms for Si addition on solidification microstructure and properties of Cu-Fe alloy

Tingju Li, Yong Dong, Songsong Xu, 2023, Journal of Alloys and Compounds.

A comprehensive investigation on microstructure and magnetic properties of immiscible Cu-Fe alloys with variation of Fe content

Shichao Liu, Zhongkai Guo, Tingju Li, 2019 .

Solidification Characteristics and Segregation Behavior of Cu-15Ni-8Sn Alloy

Shichao Liu, Zhongkai Guo, Tingju Li, 2020, Metallurgical and Materials Transactions A.

Effect of rotating magnetic field on the microstructure and properties of Cu–Ag–Zr alloy

Tongmin Wang, Tingju Li, Pengchao Zhang, 2015 .

Effect of cryorolling on microstructure and property of high strength and high conductivity Cu−0.5wt.%Cr alloy

Juncai Sun, Tingju Li, Pengchao Zhang, 2020 .

Three-Layer Al/Al–B4C Composite Material Prepared by Casting and Hot Rolling

Tingju Li, J. Jie, Yingshui Yu, 2015, Powder Metallurgy and Metal Ceramics.

Study on the preparation of Al–Si functionally graded materials using power ultrasonic field

Jie Li, Tingju Li, Zhongtao Zhang, 2009 .

Enhanced antibacterial behavior of a novel Cu-bearing high-entropy alloy

P. Liaw, Tongmin Wang, Haitao Zhang, 2022, Journal of Materials Science & Technology.

Semisolid processing AZ91 magnesium alloy by electromagnetic stirring after near-liquidus isothermal heat treatment

Tingju Li, Haitao Teng, Xiao-li Zhang, 2008 .

A PROMISING PREPARATION METHOD FOR AL / 7075-B 4 C / AL LAYERED COMPOSITE BY CONTINUOUS CASTING AND HOT ROLLING

Tingju Li, Yubo Zhang, Yingshui Yu, 2017 .

Removal of boron from metallurgical grade silicon by electromagnetic induction slag melting

Tingju Li, Guo-liang Zhang, Yiping Lu, 2011 .

An efficient method to purify metallurgical grade Si by electromagnetic semi-continuous casting of Al-30Si melt

Tongmin Wang, Tingju Li, J. Jie, 2016 .

Effect of traveling magnetic field on separation and purification of Si from Al–Si melt during solidification

Tongmin Wang, Tingju Li, S. Liu, 2015 .

Separation and purification of Si from solidification of hypereutectic Al-Si melt under rotating magnetic field

Tongmin Wang, J. L. Sun, Tingju Li, 2014 .

Separation efficiency of alumina particles in Al melt under high frequency magnetic field

Zhongya Zhang, Tingju Li, Z. Cao, 2010 .

Si Purity Control and Separation from Solidification of Al–30Si Melt under Pulse Electromagnetic Field

Tingju Li, J. Jie, Jinlan Sun, 2015 .

Boron removal from molten silicon using CaO–SiO2–BaO–CaF2 slag

Tongmin Wang, Lijuan Guo, Tingju Li, 2016 .

Effects of AlB2/AlP phase and electromagnetic stirring on impurity B/P removal in the solidification process of Al-30Si alloy

N. Han, Zhangfeng Shen, Tingju Li, 2018, Separation and Purification Technology.

Preparation and properties of TiB2 particles reinforced Cu–Cr matrix composite

Tongmin Wang, Tingju Li, Pengchao Zhang, 2015 .

Microstructure and properties of TiB2 particles reinforced Cu–Cr matrix composite

Tongmin Wang, Tingju Li, Pengchao Zhang, 2015, Journal of Materials Science.

Grain refining performance of Al-B master alloys with different microstructures on Al-7Si alloy

Tongmin Wang, Zongning Chen, Tingju Li, 2013, Metals and Materials International.

Three dimensional microstructures and wear resistance of Al-Bi immiscible alloys with different grain refiners

T. Xiao, Ya-nan Fu, Huijun Kang, 2015, Science China Technological Sciences.

In Situ TiB2 Reinforced Al-12Si Alloy Composites by Semisolid Processing

Tongmin Wang, Zongning Chen, Tongzhen Wang, 2011 .

A comparison between the mechanical and thermal properties of single-walled carbon nanotubes and boron nitride nanotubes

Jun Yu, Zhenan Tang, Tingju Li, 2017 .

Electromagnetic modification of faceted-faceted Ni31Si12-Ni2Si eutectic alloy

Tingju Li, Yiping Lu, Guobin Li, 2012 .

First-principle studies of Ca-X (X=Si,Ge,Sn,Pb) intermetallic compounds

R. Melnik, Tingju Li, B. Wen, 2010 .

Grain refinement of superalloy IN100 under the action of rotary magnetic fields and inoculants

Tingju Li, F. Bai, Guomao Yin, 2008 .

Control of Solidified Structure of Cast Metal by Imposing Electromagnetic Field

Tingju Li, Z. Cao, Zhifeng Zhang, 2001 .

Microstructure and mechanical properties of an Al–Mg alloy solidified under high pressures

E. Brosh, Zunjie Wei, C. Zou, 2013 .

Geometry Dependent Current-Voltage Characteristics of ZnO Nanostructures: A Combined Nonequilibrium Green’s Function and Density Functional Theory Study

R. Melnik, Tingju Li, B. Wen, 2009 .

A comprehensive investigation of carbon micro-alloying on microstructure evolution and properties of metastable immiscible Cu-Fe alloy

Zhongkai Guo, Tingju Li, J. Jie, 2022, Journal of Alloys and Compounds.

Eutectic high entropy alloys containing B and Si with excellent mechanical properties in annealing

Tongmin Wang, Tingju Li, Yiping Lu, 2022, Materials Science and Engineering: A.

Study of the Grain Refinement Technology by Electromagnetic Stirring for IN100 Superalloy Vacuum Investment Casting

Wei Zhang, Tingju Li, Wenzhong Jin, 2011 .

Study of ultrasonic melt treatment on the quality of horizontal continuously cast Al-1%Si alloy.

Tingju Li, Jun-ze Jin, Xintao Li, 2006, Ultrasonics sonochemistry.

Microstructure and Properties of Multi-Component AlxCoCrFeNiTi0.5 High-Entropy Alloys

Yiping Lu, Tingju Li, Yong Dong, 2013 .

Effects of Nb addition on structural evolution and properties of the CoFeNi2V0.5 high-entropy alloy

Zhiqiang Cao, Yiping Lu, Tongmin Wang, 2015 .

Effects of Mo on microstructure and mechanical properties of Fe2Ni2CrMox eutectic high entropy alloys

Junyang He, Tingju Li, Yiping Lu, 2020 .

Effect of electromagnetic stirring on microstructure and properties of Al0.5CoCrCuFeNi alloy

Tongmin Wang, Tingju Li, Guo-liang Zhang, 2012 .

Effect of Sc and Y addition on the microstructure and properties of HCP-structured high-entropy alloys

Tongmin Wang, Tingju Li, Yiping Lu, 2019, Applied Physics A.

Microstructure and mechanical properties of bulk annealed AlCoCrFeNi2.1 eutectic high-entropy alloy

Junyang He, Tingju Li, Yiping Lu, 2021, International Journal of Computational Materials Science and Surface Engineering.

A new strategy to design eutectic high-entropy alloys using simple mixture method

Hui Jiang, Zhiqiang Cao, Michael C. Gao, 2018 .

Effects of annealing treatment on microstructure and hardness of bulk AlCrFeNiMo0.2 eutectic high-entropy alloy

Tongmin Wang, Tingju Li, Yong Dong, 2015 .

Microstructures and mechanical properties of Co2MoxNi2VWx eutectic high entropy alloys

Yiping Lu, Tongmin Wang, Tingju Li, 2016 .

Study on the Formation and Precipitation Mechanism of Mn5Si3 Phase in the MBA-2 Brass Alloy

Tongmin Wang, Tingju Li, Pengchao Zhang, 2016, Metallurgical and Materials Transactions A.

Microstructure evolution of A356 alloy under compound field

Jie Li, Tingju Li, Zhongtao Zhang, 2009 .

First-principles studies of diamond polytypes

Jijun Zhao, Tingju Li, B. Wen, 2008 .

Microstructure and Mechanical Properties of VTaTiMoAlx Refractory High Entropy Alloys

Tingju Li, Yiping Lu, Hui Jiang, 2017 .

Effects of ultrasonic treatment on the formation of iron-containing intermetallic compounds in Al-12%Si-2%Fe alloys

Tingju Li, Yiping Lu, J. Jie, 2013 .

Research on microstructures of sub-rapidly solidified AZ61 Magnesium Alloy

S. Cockcroft, Zhongya Zhang, Tingju Li, 2009 .

Phase selection during solidification of undercooled Ni70.2Si29.8 eutectic alloy

Tingju Li, Luo Dawei, Gencang Yang, 2009 .

Grain refinement of pure aluminum by direct current pulsed magnetic field and inoculation

Y. Fu, Tingju Li, J. Jie, 2014 .

Preparation of heavy-section ductile iron with improved mechanical properties through quenching and tempering

Tingju Li, J. Jie, Lifen Tong, 2020, International Journal of Materials Research.

Research on the hot deformation behavior and graphite morphology of spheroidal graphite cast iron at high strain rate

Tingju Li, Z. Yan, K. Qi, 2009 .

Effect of ultrasonic treatment on formation of iron-containing intermetallic compounds in Al-Si alloys

Tingju Li, Yubo Zhang, Svynarenko Kateryna, 2016 .

Simulation study on continuous casting process of Al/Al bimetal round billet under multi-electromagnetic

Li Wu, Ying Fu, Jing Li, 2012 .

Effect of Electromagnetic Field on Microstructure and Properties of Bulk AlCrFeNiMo0.2 High-Entropy Alloy

Tingju Li, Yong Dong, Yiping Lu, 2015, Journal of Materials Engineering and Performance.

Corrosion Behavior and Failure Prediction of YSZ Coatings Under CMAS Attack

Tingju Li, S. Han, Jingjing Zhang, 2021, Journal of Thermal Spray Technology.

Thermal boundary resistance between the polycrystalline graphene and the amorphous SiO 2 substrate

Jun Yu, Zhenan Tang, Tingju Li, 2017 .

Substrate effects on the thermal performance of in-plane graphene/hexagonal boron nitride heterostructures

Jun Yu, Zhenan Tang, Tingju Li, 2018 .

In situ study on dendrite growth of metallic alloy by a synchrotron radiation imaging technology

Tongmin Wang, Tingju Li, Wanxia Huang, 2010 .

Real time imaging on dendrite morphology evolution during alloy solidification under electric field

T. Xiao, Tongmin Wang, Zongning Chen, 2012 .

The microstructure and property of Al–Si alloy and Al–Mn alloy bimetal prepared by continuous casting

Tongmin Wang, Xiaoyan Song, Tingju Li, 2012 .

Fabrication of MgAl2O4 Reinforced Aluminum Matrix Gradient Composites under High Frequency Magnetic Field

Tingju Li, Z. Cao, Tongmin Wang, 2011 .

Evolution of dendrite morphology of a binary alloy under an applied electric current: an in situ observation.

T. Xiao, Tongmin Wang, Tingju Li, 2010, Physical review. E, Statistical, nonlinear, and soft matter physics.

Microstructure and Fabrication of Cu-Pb-Sn/Q235 Laminated Composite by Semi-Solid Rolling

Tongmin Wang, Y. Fu, Tingju Li, 2018, Metals.

Fabrication of Cu-24Pb-2Sn/C10 laminar composite by solid-liquid continuous casting compositing

Z. Dong, Tingju Li, J. Jie, 2020, Materials Letters.

Novel insight into mechanism of secondary phase's morphology evolution in hypomonotectic Cu-Pb-Sn alloy during solidification

Z. Dong, Tongmin Wang, Tingju Li, 2019, Journal of Molecular Liquids.

Microstructure evolution of A356 alloy in a novel rheocasting approach

Tingju Li, Jin Jun-ze, Zhang Xiao-li, 2009 .

Microstructure and properties of Al-Si alloys under intermediate frequency electromagnetic field

Y. Fu, Tingju Li, J. Jie, 2018, IOP Conference Series: Materials Science and Engineering.

Microstructure and Mechanical Properties of Al-8 pct Si Alloy Prepared by Direct Chill Casting Under Electromagnetic and Ultrasonic Fields

Y. Fu, Tingju Li, Yiping Lu, 2014, Metallurgical and Materials Transactions A.

Numerical simulation of solidification process of Sn-3.5%Pb hollow billet with stirring magnetic field

Tongmin Wang, Tingju Li, Qi Zhang, 2007 .

A surface energy driven dissolution model for immiscible Cu-Fe alloy

Pengfei Wang, Tongmin Wang, Tingju Li, 2018, Journal of Molecular Liquids.

Preparation and characterisation of tin bronze/steel composites by solid–liquid bonding with vibration

H. Ding, Tingju Li, J. Jie, 2023, Materials Science and Technology.

Characterisation of steel/nickel bronze clad strips prepared by continuous solid/liquid bonding method

Shichao Liu, Tingju Li, Chengbin Liu, 2019, Materials Science and Technology.

Preparing bulk ultrafine-microstructure high-entropy alloys via direct solidification.

Hui Jiang, Sheng Guo, Zhiqiang Cao, 2018, Nanoscale.

CALPHAD-guided optimization of the microstructure of Sn–Sb–Cu bearing alloys

Tingju Li, J. Jie, Zhenpeng Wu, 2022, Materials Chemistry and Physics.

Solidification microstructure evolution and its corresponding mechanism of metastable immiscible Cu80Fe20 alloy with different cooling conditions

Shichao Liu, Tongmin Wang, Zhongkai Guo, 2018 .

Effect of turbulent flow on electromagnetic elimination with high frequency magnetic field

Tongmin Wang, Tingju Li, Z. Cao, 2006 .

Designing CoCrFeNi-M (M = Nb, Ta, Zr, and Hf) eutectic high-entropy alloys via a modified simple mixture method

Tingju Li, Yiping Lu, Zheng Ren, 2023, Journal of Alloys and Compounds.

Grouping strategy via d-orbit energy level to design eutectic high-entropy alloys

Yiping Lu, Tianxin Li, Tongmin Wang, 2021, Applied Physics Letters.

Effect of Niobium on Microstructure and Properties of the CoCrFeNbxNi High Entropy Alloys

Jiango Li, Tingju Li, Cao Zhiqiang, 2017 .

Effects of Tungsten on Microstructure and Mechanical Properties of CrFeNiV0.5Wx and CrFeNi2V0.5Wx High-Entropy Alloys

Tongmin Wang, Tingju Li, Z. Cao, 2015, Journal of Materials Engineering and Performance.

Microstructure evolution and non-equilibrium solidification of undercooled Ni-29.8at% Si eutectic alloy melts

Tingju Li, Haitao Teng, Yabo Fu, 2010 .

Wear behavior of high strength and high conductivity Cu alloys under dry sliding

Tongmin Wang, Tingju Li, Pengchao Zhang, 2015 .

Revealing the Relationship Between Morphology of Pb-Rich Secondary Phases and Mechanical Properties of Laminated Cu–Pb–Sn/Steel Composite Through CALPHAD and FEA

Tongmin Wang, Tingju Li, J. Jie, 2022, Metallurgical and Materials Transactions A.

Mechanical and thermal properties of the coaxial carbon nanotube@boron nitride nanotube composite

Zhenan Tang, Tingju Li, T. He, 2019, Physica E: Low-dimensional Systems and Nanostructures.

Evaluation of adhesion and mechanical properties of plasma sprayed NiCrAl/Al2O3-13wt.%TiO2 coatings

Zehua Wang, Tingju Li, Jingjing Zhang, 2018 .

Influence of Precipitation Hardening on the Sliding Wear Behavior of a Cu-Zn-Al-Mn-Si Based Brass Alloy

Tingju Li, J. Jie, S. Liu, 2017 .

Transformation from n-Diamond to sp3-Banding Carbon

Tingju Li, Cao Zhiqiang, Jin Jun-ze, 2005 .

Precipitation in Al–Mg solid solution prepared by solidification under high pressure

Zunjie Wei, C. Zou, Tingju Li, 2014 .

Thermal stability of Al–Mg alloys after solidification under high pressures

Zunjie Wei, C. Zou, Tingju Li, 2014 .

Geometry and temperature dependent thermal conductivity of diamond nanowires: A non-equilibrium molecular dynamics study

R. Melnik, Tingju Li, B. Wen, 2010 .

Novel as-cast AlCrFe2Ni2Ti05 high-entropy alloy with excellent mechanical properties

Tongmin Wang, Tingju Li, Yiping Lu, 2020, International Journal of Minerals, Metallurgy and Materials.

Effects of Li2CO3 on Properties of Mould Flux for High Speed Continuous Casting

Guo Dong Zhang, Tingju Li, M. Jiang, 2011 .

Effect of annealing treatment on the microstructures, mechanical, and wear properties of a manganese brass alloy

Tingju Li, J. Jie, Hang Li, 2016 .

A Criterion for Topological Close-Packed Phase Formation in High Entropy Alloys

Yong Zhang, Yong Dong, Li Jiang, 2015, Entropy.

Novel (CoFe2NiV0.5Mo0.2)100−xNbx Eutectic High-Entropy Alloys with Excellent Combination of Mechanical and Corrosion Properties

Tongmin Wang, Tingju Li, Yiping Lu, 2020, Acta Metallurgica Sinica (English Letters).

Effects of rotating magnetic and ultrasonic fields on the microstructure and mechanical properties of Al-8 wt.%Si alloy

Tingju Li, J. Jie, Han Chen, 2014 .

Influence of growth temperature on the structure, composition and bonding character of nitrogen-doped multiwalled carbon nanotubes

Xiaoyan Song, Tingju Li, B. Wen, 2011 .

Preparation and electrochemical properties of nitrogen-doped multi-walled carbon nanotubes

Xiaoyan Song, Tingju Li, B. Wen, 2011 .

Effect of B4C Particle Size on the Properties of Al/(Al–B4C)/Al Functionally Gradient Material

Tingju Li, Chenglong Yao, Guangye Xu, 2020, Powder Metallurgy and Metal Ceramics.

Overflowing phenomenon during ultrasonic treatment in Al−Si alloys

Y. Fu, Tingju Li, D. Zhong, 2013 .

Wear Behavior of Ductile Iron Wheel Material Used for Rail-Transit Vehicles under Dry Sliding Conditions

Tingju Li, J. Jie, Lifen Tong, 2020, Materials.

Effect of carbon addition on the microstructure and mechanical properties of CoCrFeNi high entropy alloy

Tingju Li, Yiping Lu, Li Jiang, 2017, Science China Technological Sciences.

Effect of Annealing Time on the Microstructure and Mechanical Properties of the AlCrFeNi2Ti0.5 High Entropy Alloys

Tingju Li, Z. Cao, Jingyu Han, 2015 .

Lightweight, ultrastrong and high thermal-stable eutectic high-entropy alloys for elevated-temperature applications

P. Liaw, Tongmin Wang, Tingju Li, 2023, Acta Materialia.

Designing Eutectic High‐Entropy Alloys Containing Nonmetallic Elements

Tongmin Wang, Tingju Li, Yiping Lu, 2022, Advanced Engineering Materials.

Continuous casting of copper tube billets under rotating electromagnetic field

F. Chen, Tingju Li, B. Wei, 2007 .

Mathematical model of electromagnetic elimination in tubule with high frequency magnetic field

Tongmin Wang, Tingju Li, Z. Cao, 2006 .

A novel high-entropy alloy with an exceptional combination of soft magnetic properties and corrosion resistance

Tongmin Wang, Tingju Li, Yiping Lu, 2022, Science China Materials.

Effects of Fe Content on Microstructures and Properties of AlCoCrFexNi High-Entropy Alloys

Tingju Li, Yiping Lu, Li Jiang, 2015, The Arabian journal for science and engineering.

Microstructure and Mechanical Properties of the W-Ni-Co System Refractory High-Entropy Alloys

Tongmin Wang, Tingju Li, Z. Cao, 2015 .

Effect of Ti and Nb Contents on Microstructure and Mechanical Properties of HfZrVTaMoWTixNby Refractory High‐Entropy Alloys

Tongmin Wang, E. Guo, Tingju Li, 2021, Advanced Engineering Materials.

Effect of high magnetic fields on the solidification microstructure of an Al-Mn alloy

Tingju Li, Z. Yan, D. Luo, 2009 .

Processing defect, microstructure evolution and mechanical properties of laser powder bed fusion Al-12Si alloys

Tongmin Wang, Tingju Li, Yubo Zhang, 2023, Journal of Materials Research and Technology.

Influence of cold deformation and Ti element on the microstructure and properties of Cu–Cr system alloys

Tongmin Wang, Tingju Li, Pengchao Zhang, 2015 .

Two kinds of magnetic fields induced by one pair of rotating permanent magnets and their application in stirring and controlling molten metal flows

Xiaodong Wang, Tingju Li, Y. Fautrelle, 2005 .

Surface Quality Improvement of Continuously Cast Metals by Imposing Intermittent High Frequency Magnetic Field and Synchronizing the Field with Mold Oscillation

S. Asai, Tingju Li, K. Sassa, 1996 .

Microstructure and Properties of Ni70.2Si29.8 Eutectic Alloy Produced by Directional Solidification

Tingju Li, Yong Dong, Yiping Lu, 2014 .

Variation of the microstructure of ingots of DC cast alloy 7050 during homogenization

Tingju Li, Z. Cao, Yali Feng, 2010 .

Grain refinement of horizontal continuous casting of the CuNi10Fe1Mn alloy hollow billets by rotating magnetic field (RMF)

Tingju Li, Z. Yan, X. N. Li, 2008 .

Microstructure and hardness of undercooled Ni78.6Si21.4 eutectic alloy

Tingju Li, Luo Dawei, Liu Ning, 2010 .

Excellent strength-ductility combination of Cr26Mn20Fe20Co20Ni14 high-entropy alloy at cryogenic temperatures

G. Sha, Tongmin Wang, Tingju Li, 2023, Journal of Materials Science & Technology.

Effect of B addition on microstructures and properties of Cu-15Ni-8Sn alloy

Zhongkai Guo, Tingju Li, Songsong Xu, 2023, Journal of Alloys and Compounds.

Microstructure Evolution of Cu-15Ni-8Sn Alloy Prepared by Vertical Semi-continuous Casting with EMS

Zhongkai Guo, Tingju Li, J. Jie, 2018, IOP Conference Series: Materials Science and Engineering.

Modelling of the thermo-solutal convection, shrinkage flow and grain movement during globular equiaxed solidification in a multi-phase system - I. Three-phase flow model

A. Bührig-Polaczek, Tongmin Wang, Tingju Li, 2006 .

Synergetic strengthening of heterogeneous interface far beyond rule of mixture in Cu/1010 steel bimetal laminar composite

Jia Liu, Tingju Li, J. Jie, 2022, Materials Science and Engineering: A.

Microstructure evolution of 3003/4004 clad ingots under diverse physical fields

Y. Fu, Tingju Li, D. Zhong, 2013 .

Characteristics of copper-clad aluminum rods prepared by horizontal continuous casting

Tongmin Wang, Y. Fu, Tingju Li, 2017, Metals and Materials International.

Optimization design of wide face water slots for medium-thick slab casting mold

Huijun Kang, Tongmin Wang, Zongning Chen, 2016 .

Deformation and heat treatment ability of three-layer 6009/7050/6009 Al alloy clad slab prepared by direct-chill casting

Tongmin Wang, Tingju Li, Z. Cao, 2018 .

Effects of Nb addition on structural evolution and properties of the CoFeNi2V0.5 high-entropy alloy

Tongmin Wang, Tingju Li, Z. Cao, 2015, Applied Physics A.

Preparation of High-Nitrogen Ductile Iron by Injecting Nitrogen Gas in Molten Iron

Shichao Liu, Tingju Li, J. Jie, 2020, Materials.

Microstructure Evolution and Wear Behavior of the Laser Cladded CoFeNi2V0.5Nb0.75 and CoFeNi2V0.5Nb High-Entropy Alloy Coatings

Zhiqiang Cao, Tingju Li, Dewei Deng, 2016, Journal of Thermal Spray Technology.