M. Jørgensen

发表

Synthesis of dye linked conducting block copolymers, dye linked conducting homopolymers and preliminary application to photovoltaics

Ole Hagemann, Mikkel Jørgensen, Frederik C. Krebs, 2004 .

Conducting block copolymers. Towards a polymer pn- junction

Mikkel Jørgensen, Frederik C. Krebs, F. Krebs, 2003 .

Screen-Display-Induced Photoresponse Mapping for Large-Area Photovoltaics

F. Krebs, Ritu Gupta, G. U. Kulkarni, 2013 .

Stability of Polymer Solar Cells

Suren A. Gevorgyan, Mikkel Jørgensen, Kion Norrman, 2012, Advanced materials.

Fused thiophene/quinoxaline low band gap polymers for photovoltaic's with increased photochemical stability

F. Krebs, Martin Helgesen, R. Søndergaard, 2011 .

Polymers for organic photovoltaics based on 1,5-bis(2-hexyldecyloxy)-naphthalene, thiophene, and benzothiadiazole

F. Krebs, M. Jørgensen, J. Carlé, 2011 .

Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb

Ole Hagemann, Mikkel Jørgensen, Roar R. Søndergaard, 2011 .

Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality.

Jan Fyenbo, Mikkel Jørgensen, Andrew J. Medford, 2010, Optics express.

Upscaling of polymer solar cell fabrication using full roll-to-roll processing.

Mikkel Jørgensen, Frederik C. Krebs, F. Krebs, 2010, Nanoscale.

Thermo-cleavable solvents for printing conjugated polymers: Application in polymer solar cells

Ole Hagemann, Mikkel Jørgensen, Frederik C. Krebs, 2009 .

Stability/degradation of polymer solar cells

F. Krebs, K. Norrman, M. Jørgensen, 2008 .

A setup for studying stability and degradation of polymer solar cells

Suren A. Gevorgyan, Mikkel Jørgensen, Frederik C. Krebs, 2008 .

Influence of Residual Catalyst on the Properties of Conjugated Polyphenylenevinylene Materials: Palladium Nanoparticles and Poor Electrical Performance

Mikkel Jørgensen, Frederik C. Krebs, F. Krebs, 2004 .

Lifetimes of organic photovoltaics: photooxidative degradation of a model compound

F. Krebs, K. Norrman, Jan Alstrup, 2006 .

Lifetimes of organic photovoltaics: Design and synthesis of single oligomer molecules in order to study chemical degradation mechanisms

F. Krebs, K. Norrman, Jan Alstrup, 2006 .

2D Characterization of OPV from Single and Tandem Cells to Fully Roll‐to‐Roll Processed Modules with and without Electrical Contact

F. Krebs, M. Jørgensen, 2014 .

Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules

F. Krebs, D. Tanenbaum, H. Hoppe, 2012 .

Application of optical coherence tomography (OCT) as a 3-dimensional imaging technique for roll-to-roll coated polymer solar cells

F. Krebs, T. Jørgensen, M. Jørgensen, 2012 .

Flow Synthesis of Silver Nanowires for Semitransparent Solar Cell Electrodes: A Life Cycle Perspective.

F. Krebs, N. Espinosa, R. Søndergaard, 2016, ChemSusChem.

Practical evaluation of organic polymer thermoelectrics by large‐area R2R processing on flexible substrates

F. Krebs, N. Espinosa, R. Søndergaard, 2013 .

Elastic Properties of Nonstoichiometric Reacted PDMS Networks

P. Sommer-Larsen, O. Hassager, M. Jørgensen, 2003 .

Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules

Suren A. Gevorgyan, Mikkel Jørgensen, Markus Hösel, 2013 .

Freely available OPV—The fast way to progress

Suren A. Gevorgyan, Mikkel Jørgensen, Markus Hösel, 2013 .

Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing

Jan Fyenbo, Mikkel Jørgensen, Frederik C. Krebs, 2010 .

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes.

Mikkel Jørgensen, Jeongdai Jo, Markus Hösel, 2012, Nanoscale.

All polymer photovoltaics: From small inverted devices to large roll-to-roll coated and printed solar cells

F. Krebs, Yao Liu, K. Norrman, 2013 .

Roll‐to‐Roll Printed Silver Nanowire Semitransparent Electrodes for Fully Ambient Solution‐Processed Tandem Polymer Solar Cells

F. Krebs, J. Bentzen, E. Bundgaard, 2015 .

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

Suren A. Gevorgyan, Mikkel Jørgensen, Christoph J. Brabec, 2014 .

Kinetics of Nanoparticle Catalysis from First Principles

M. Jørgensen, 2019 .

Microkinetic Modeling of Nanoparticle Catalysis using Density Functional Theory

M. Jørgensen, 2017 .

Probing individal subcells of fully printed and coated polymer tandem solar cells using multichromatic opto-electronic characterization methods

Mikkel Jørgensen, Frederik C. Krebs, Henrik Friis Dam, 2015 .

Comparison of UV‐Curing, Hotmelt, and Pressure Sensitive Adhesive as Roll‐to‐Roll Encapsulation Methods for Polymer Solar Cells

Mikkel Jørgensen, Markus Hösel, Roar R. Søndergaard, 2013 .

The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices

Suren A. Gevorgyan, Ronn Andriessen, Yulia Galagan, 2012 .

Current Collecting Grids for ITO-Free Solar Cells

Ronn Andriessen, Yulia Galagan, Mikkel Jørgensen, 2012 .

Roll-coating fabrication of flexible large area small molecule solar cells with power conversion efficiency exceeding 1%

F. Krebs, Hongzheng Chen, E. Bundgaard, 2014 .

The state of organic solar cells—A meta analysis

Mikkel Jørgensen, Roar R. Søndergaard, Frederik C. Krebs, 2013 .

Degradation of Polymer‐Based OPV

F. Krebs, M. Jørgensen, 2012 .

MonteCoffee: A programmable kinetic Monte Carlo framework.

M. Jørgensen, H. Grönbeck, 2018, The Journal of chemical physics.

Scaling Relations and Kinetic Monte Carlo Simulations To Bridge the Materials Gap in Heterogeneous Catalysis

M. Jørgensen, H. Grönbeck, 2017 .

Stepwise unidirectional synthesis of oligo phenylene vinylenes with a series of monomers. Use in plastic solar cells.

Mikkel Jørgensen, F. Krebs, M. Jørgensen, 2005, The Journal of organic chemistry.

Synthesis and characterization of zwitterionic carbon dioxide fixing reagents

F. Krebs, M. Jørgensen, Mette Mikkelsen, 2010 .

Lifetime of Organic Photovoltaics: Status and Predictions

F. Krebs, M. Madsen, R. Søndergaard, 2016 .

New Low‐Bandgap Materials with Good Stabilities and Efficiencies Comparable to P3HT in R2R‐Coated Solar Cells

F. Krebs, R. Søndergaard, M. Jørgensen, 2012 .

On the stability of a variety of organic photovoltaic devices by IPCE and in situ IPCE analyses--the ISOS-3 inter-laboratory collaboration.

Ronn Andriessen, Yulia Galagan, Mikkel Jørgensen, 2012, Physical chemistry chemical physics : PCCP.

THE OUTCOME OF THE ISOS-3 INTER-LABORATORY COLLABORATION – CHARACTERIZATION OF DEGRADATION PATHWAYS OCCURRING IN A VARIETY OF ORGANIC PHOTOVOLTAIC DEVICES

Gülşah Y. Uzunoğlu, F. Krebs, D. Germack, 2016 .

Polymer and organic solar cells viewed as thin film technologies: What it will take for them to become a success outside academia

F. Krebs, M. Jørgensen, 2013 .

Extracting Local Quantitative Atomic-resolution Strain Information from High-precision STEM Data of Supported Nanocatalysts

A. Yankovich, M. Jørgensen, E. Olsson, 2018, Microscopy and Microanalysis.

Slot‐Die‐Coated V2O5 as Hole Transport Layer for Flexible Organic Solar Cells and Optoelectronic Devices

Michail J. Beliatis, F. Krebs, R. García‐Valverde, 2016 .

Printed polymer solar cells

F. Krebs, Martin Helgesen, M. Jørgensen, 2012 .

Roll-to-Roll Processing of Inverted Polymer Solar Cells using Hydrated Vanadium(V)Oxide as a PEDOT:PSS Replacement

F. Krebs, D. Tanenbaum, N. Espinosa, 2011, Materials.

High power spectrometer for the characterization of photovoltaic cells in a controlled atmosphere or vacuum

F. Krebs, M. Jørgensen, 2003 .

The effect of fluorination in semiconducting polymers of the polyphenyleneimine type

F. Krebs, M. Jørgensen, 2004 .

Roll‐to‐Roll Inkjet Printing and Photonic Sintering of Electrodes for ITO Free Polymer Solar Cell Modules and Facile Product Integration

Mikkel Jørgensen, Roar R. Søndergaard, Frederik C. Krebs, 2013 .

The Critical Choice of PEDOT:PSS Additives for Long Term Stability of Roll‐to‐Roll Processed OPVs

F. Krebs, R. Søndergaard, M. Jørgensen, 2015 .

Thermocleavable materials for polymer solar cells with high open circuit voltage-a comparative study.

Kristian O. Sylvester-Hvid, F. Krebs, T. Tromholt, 2009, ACS applied materials & interfaces.

Low band gap poly-thienopyrazines for solar cells—Introducing the 11-thia-9,13-diaza-cyclopenta[b]triphenylenes

F. Krebs, O. Hagemann, M. Jørgensen, 2007 .

Non‐destructive lateral mapping of the thickness of the photoactive layer in polymer‐based solar cells

A. W. Liehr, Kristian O. Sylvester-Hvid, F. Krebs, 2011 .

Organic Solar Cells: Current Collecting Grids for ITO‐Free Solar Cells (Adv. Energy Mater. 1/2012)

F. Krebs, Y. Galagan, D. Tanenbaum, 2012 .

A Nanoparticle Approach towards Morphology Controlled Organic Photovoltaics (OPV)

F. Krebs, Hongzheng Chen, K. Norrman, 2012 .

Orientation effects in self-organized, highly conducting regioregular poly(3-hexylthiophene) determined by vacuum ultraviolet spectroscopy

F. Krebs, S. Hoffmann, M. Jørgensen, 2003 .

Influence of atomic site-specific strain on catalytic activity of supported nanoparticles

A. Yankovich, M. Jørgensen, H. Grönbeck, 2018, Nature Communications.

Synthesis and characterization of water-soluble phenylene-vinylene-based singlet oxygen sensitizers for two-photon excitation.

C. B. Nielsen, P. Ogilby, M. Jørgensen, 2005, The Journal of organic chemistry.

Molecular tuning of phenylene-vinylene derivatives for two-photon photosensitized singlet oxygen production.

C. B. Nielsen, P. Ogilby, M. Jørgensen, 2009, The Journal of organic chemistry.

Two-photon photosensitized production of singlet oxygen.

P. Ogilby, M. Jørgensen, P. Frederiksen, 2001, Journal of the American Chemical Society.

Structural determination of ethylene-propylene-diene rubber (EPDM) containing high degree of controlled long-chain branching

W. B. Pedersen, M. Jørgensen, K. Almdal, 2009 .

The teraton challenge. A review of fixation and transformation of carbon dioxide

Mikkel Jørgensen, Frederik C. Krebs, F. Krebs, 2010 .

Selective Halogen-Lithium Exchange Reaction of Bromine-Substituted 25,26,27,28-Tetrapropoxycalix[4]arene.

M. Jørgensen, M. Larsen, 1996, The Journal of organic chemistry.

Influence of Side Chain Position on the Electrical Properties of Organic Solar Cells Based on Dithienylbenzothiadiazole-alt-phenylene Conjugated Polymers

F. Krebs, E. Bundgaard, M. Jørgensen, 2015 .

Synthesis and structural characterization of new stiff rod oligomeric domains by X-ray crystallography and NMR.

F. Krebs, M. Jørgensen, 2002, Journal of Organic Chemistry.

Lithium-ion induced conformational change of 5,17-bis(9-fluorenyl)-25,26,27,28-tetrapropoxy calix[4]arene resulting in an egg-shaped dimeric clathrate

F. Krebs, M. Jørgensen, A. Faldt, 2000 .

Synthesis, Structure, and Fluorescence Properties of 5,17-Distyryl-25,26,27,28-tetrapropoxycalix[4]arenes in the Cone Conformation

F. Krebs, M. Jørgensen, N. Harrit, 1998 .

Calix[4]arene-5,17-dicarboxylic acids and their interactions with aliphatic amines. Part 1. Studies in solution

F. Krebs, M. Jørgensen, 2000 .

Calix[4]arene-5,17-dicarboxylic acids and their interactions with aliphatic amines. Part 2. A crystal engineering approach

F. Krebs, M. Jørgensen, 2000 .

Synthesis and conformational studies of a series of 5,17-bis-aryl-25,26,27,28-tetrapropoxycalix[4]arenes: the influence of π–π interactions on the molecular structure

F. Krebs, M. Jørgensen, N. Harrit, 1999 .

Synthesis and conformational analysis of extended calix[4]arenes and a doubly bridged bis-calix[4]arene

P. Sommer-Larsen, M. Jørgensen, M. Larsen, 1997 .

A new prearranged tripodant ligand N,N′,N″-trimethyl-N,N′,N″-tris(3-pyridyl)-1,3,5-benzene tricarboxamide is easily obtained via the N-methyl amide effect

F. Krebs, M. Jørgensen, 2001 .

Synthesis and Structural Properties of 5,17-Bis(N-methyl-N-arylaminocarbonyl)calix[4]arenes. Directing the Substituents toward the Cavity by Use of the Cis-Generating Property of the N-Methylaminocarbonyl Linker

K. Schaumburg, F. Krebs, M. Jørgensen, 1998 .

Superradiant properties of 4,4′-bis(1H-phenanthro[9,10-d]imidazol-2-yl)biphenyl and how a laser dye with exceptional stability can be obtained in only one synthetic step

F. Krebs, L. Lindvold, M. Jørgensen, 2001 .

A new versatile receptor platform.

F. Krebs, M. Jørgensen, 2001, The Journal of organic chemistry.

Negishi type biaryl cross-coupling reactions on calix[4]arenes

M. Jørgensen, M. Larsen, 1997 .

Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods.

Mikkel Jørgensen, Kion Norrman, Eva Bundgaard, 2011, ACS nano.

Improving the Operational Stability of PBDTTTz‐4 Polymer Solar Cells Modules by Electrode Modification

Suren A. Gevorgyan, Mikkel Jørgensen, Roar R. Søndergaard, 2016 .

Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules.

F. Krebs, R. Søndergaard, M. Jørgensen, 2016, Nanoscale.

A laboratory scale approach to polymer solar cells using one coating/printing machine, flexible substrates, no ITO, no vacuum and no spincoating

Mikkel Jørgensen, Frederik C. Krebs, Thomas Rieks Andersen, 2013 .

A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration

Ole Hagemann, Jan Fyenbo, Mikkel Jørgensen, 2009 .

OPV for mobile applications: an evaluation of roll-to-roll processed indium and silver free polymer solar cells through analysis of life cycle, cost and layer quality using inline optical and functional inspection tools

Markus Hösel, Roar R. Søndergaard, Mikkel Jørgensen, 2013 .

Consensus stability testing protocols for organic photovoltaic materials and devices

Suren A. Gevorgyan, Vishal Shrotriya, Mikkel Jørgensen, 2011 .

TOF-SIMS investigation of degradation pathways occurring in a variety of organic photovoltaic devices--the ISOS-3 inter-laboratory collaboration.

Ronn Andriessen, Yulia Galagan, Mikkel Jørgensen, 2012, Physical chemistry chemical physics : PCCP.

Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration

Suren A. Gevorgyan, Yulia Galagan, Mikkel Jørgensen, 2012 .

Improving, characterizing and predicting the lifetime of organic photovoltaics

Suren A. Gevorgyan, Mikkel Jørgensen, Markus Hösel, 2017 .

25th Anniversary Article: Rise to Power – OPV‐Based Solar Parks

Mikkel Jørgensen, Markus Hösel, Nieves Espinosa, 2014, Advanced materials.

Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: Stability over 10,000 h

Suren A. Gevorgyan, Mikkel Jørgensen, Frederik C. Krebs, 2013 .

Failure Modes and Fast Repair Procedures in High Voltage Organic Solar Cell Installations

Mikkel Jørgensen, Markus Hösel, Roar R. Søndergaard, 2014 .

A compact multi-chamber setup for degradation and lifetime studies of organic solar cells

Suren A. Gevorgyan, Mikkel Jørgensen, Frederik C. Krebs, 2011 .

Printed metal back electrodes for R2R fabricated polymer solar cells studied using the LBIC technique

Mikkel Jørgensen, Roar R. Søndergaard, Frederik C. Krebs, 2011 .

Roll-to-roll processed polymer tandem solar cells partially processed from water

F. Krebs, K. Norrman, E. Bundgaard, 2012 .

Ultra fast and parsimonious materials screening for polymer solar cells using differentially pumped slot-die coating.

Mikkel Jørgensen, Andrew J. Medford, Jan Alstrup, 2010, ACS applied materials & interfaces.

Advanced Functional Polymers for Increasing the Stability of Organic Photovoltaics

Mikkel Jørgensen, Frederik C. Krebs, Eva Bundgaard, 2013 .

Fabrication of Polymer Solar Cells Using Aqueous Processing for All Layers Including the Metal Back Electrode

Mikkel Jørgensen, Roar R. Søndergaard, Frederik C. Krebs, 2011 .

A Route to Stable Nanostructures in Conjugated Polymers

F. Krebs, M. Jørgensen, J. W. Andreasen, 2007 .

Two-photon photosensitized production of singlet oxygen in water.

Mikkel Jørgensen, Esben Skovsen, Peter R Ogilby, 2005, Journal of the American Chemical Society.

Effects of conjugation length and resonance enhancement on two-photon absorption in phenylene-vinylene oligomers.

O. Christiansen, M. Jørgensen, M. Paterson, 2008, Physical chemistry chemical physics : PCCP.

First-Principles Microkinetic Modeling of Methane Oxidation over Pd(100) and Pd(111)

M. Jørgensen, H. Grönbeck, 2016 .

Connection between macroscopic kinetic measurables and the degree of rate control

M. Jørgensen, H. Grönbeck, 2017 .

The Site-Assembly Determines Catalytic Activity of Nanoparticles.

M. Jørgensen, H. Grönbeck, 2018, Angewandte Chemie.

Strain Affects CO Oxidation on Metallic Nanoparticles Non-linearly

M. Jørgensen, H. Grönbeck, 2019, Topics in Catalysis.

Polypyrrole doped with alkyl benzenesulfonates

Mikkel Jørgensen, Peter Sommer-Larsen, Keld West, 2002 .

Fast printing of thin, large area, ITO free electrochromics on flexible barrier foil

Mikkel Jørgensen, Markus Hösel, Roar R. Søndergaard, 2013 .

Monte Carlo Potential Energy Sampling for Molecular Entropy in Zeolites

Lin Chen, M. Jørgensen, H. Grönbeck, 2018, The Journal of Physical Chemistry C.

Adsorbate Entropies with Complete Potential Energy Sampling in Microkinetic Modeling

M. Jørgensen, H. Grönbeck, 2017 .

H2/D2 exchange reaction on mono-disperse Pt clusters: enhanced activity from minute O2 concentrations

U. G. Vej-Hansen, O. Hansen, I. Chorkendorff, 2016 .

A perdeuterated cryoprotectant for neutron studies and a demonstration of its use for neutron powder diffraction on l-(−)-ephedrine hemihydrate

F. Krebs, M. Jørgensen, K. Frydenvang, 2001 .

Effect of sensitizer protonation on singlet oxygen production in aqueous and nonaqueous media.

M. Jørgensen, J. Arnbjerg, Mette Johnsen, 2007, The journal of physical chemistry. A.

Stepwise and directional synthesis of end-functionalized single-oligomer OPVs and their application in organic solar cells.

Mikkel Jørgensen, F. Krebs, M. Jørgensen, 2004, The Journal of organic chemistry.

Low band gap polymers based on 1,4-dialkoxybenzene, thiophene, bithiophene donors and the benzothiadiazole acceptor

F. Krebs, M. Jørgensen, J. Carlé, 2010 .

Matrix Organization and Merit Factor Evaluation as a Method to Address the Challenge of Finding a Polymer Material for Roll Coated Polymer Solar Cells

F. Krebs, E. Bundgaard, M. Andersson, 2015 .

Roll-coating fabrication of flexible organic solar cells: comparison of fullerene and fullerene-free systems

F. Krebs, E. Bundgaard, Yuze Lin, 2016 .

Comparison of additive amount used in spin-coated and roll-coated organic solar cells

F. Krebs, Hongzheng Chen, E. Bundgaard, 2014 .

Comparative studies of photochemical cross-linking methods for stabilizing the bulk hetero-junction morphology in polymer solar cells

Mikkel Jørgensen, Kion Norrman, Frederik C. Krebs, 2012 .

Large scale deployment of polymer solar cells on land, on sea and in the air

Markus Hösel, Frederik C. Krebs, Nieves Espinosa, 2014 .

ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules

Mikkel Jørgensen, Frederik C. Krebs, Dechan Angmo, 2011 .

It is all in the Pattern—High‐Efficiency Power Extraction from Polymer Solar Cells through High‐Voltage Serial Connection

Mikkel Jørgensen, Markus Hösel, Roar R. Søndergaard, 2013 .

Overcoming the Scaling Lag for Polymer Solar Cells

Ole Hagemann, Suren A. Gevorgyan, Markus Hösel, 2017 .

Portable and wireless IV-curve tracer for >5 kV organic photovoltaic modules

J. A. Villarejo, Markus Hösel, Roar R. Søndergaard, 2016 .

Scalable single point power extraction for compact mobile and stand-alone solar harvesting power sources based on fully printed organic photovoltaic modules and efficient high voltage DC/DC conversion

Mikkel Jørgensen, Markus Hösel, Roar R. Søndergaard, 2016 .

Enabling Flexible Polymer Tandem Solar Cells by 3D Ptychographic Imaging

Mikkel Jørgensen, Roar R. Søndergaard, Frederik C. Krebs, 2015 .

High‐Volume Processed, ITO‐Free Superstrates and Substrates for Roll‐to‐Roll Development of Organic Electronics

Mikkel Jørgensen, Gisele A. dos Reis Benatto, Markus Hösel, 2014, Advanced science.

Carbon: The Ultimate Electrode Choice for Widely Distributed Polymer Solar Cells

Mikkel Jørgensen, Markus Hösel, Roar R. Søndergaard, 2014 .

Efficient decommissioning and recycling of polymer solar cells: justification for use of silver

Roar R. Søndergaard, Mikkel Jørgensen, Frederik C. Krebs, 2014 .

All printed transparent electrodes through an electrical switching mechanism: A convincing alternative to indium-tin-oxide, silver and vacuum

Mikkel Jørgensen, Kion Norrman, Roar R. Søndergaard, 2012 .

Fast Inline Roll‐to‐Roll Printing for Indium‐Tin‐Oxide‐Free Polymer Solar Cells Using Automatic Registration

Mikkel Jørgensen, Markus Hösel, Roar R. Søndergaard, 2013 .

The OE-A OPV demonstrator anno domini 2011

Frederik C. Krebs, Jan Fyenbo, David M. Tanenbaum, 2011 .

Synthesis, Properties, and Langmuir−Blodgett Film Studies of an Ionic Dye Terminated Rigid Conducting Oligomer

Mikkel Jørgensen, Frederik C. Krebs, Noemi Rozlosnik, 2003 .

Perspectives on Computational Catalysis for Metal Nanoparticles

M. Jørgensen, H. Grönbeck, 2019, ACS Catalysis.

The influence of additives on the morphology and stability of roll-to-roll processed polymer solar cells studied through ex situ and in situ X-ray scattering

Mikkel Jørgensen, Frederik C. Krebs, Henrik Friis Dam, 2014 .

Scaling Up ITO‐Free Solar Cells

Ronn Andriessen, Yulia Galagan, Mikkel Jørgensen, 2014 .

Vacuum UV of a PPV type polymer and possible PTFE induced orientation

F. Krebs, P. Sommer-Larsen, K. Norrman, 2004 .

The Organic Power Transistor: Roll‐to‐Roll Manufacture, Thermal Behavior, and Power Handling When Driving Printed Electronics

Mikkel Jørgensen, Markus Hösel, Roar R. Søndergaard, 2016 .

Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture

Mikkel Jørgensen, Christoph J. Brabec, Ning Li, 2014 .

Selective Acetylene Hydrogenation over Single-Atom Alloy Nanoparticles by Kinetic Monte Carlo.

M. Jørgensen, H. Grönbeck, 2019, Journal of the American Chemical Society.

In situ electrical and thermal monitoring of printed electronics by two-photon mapping

F. Krebs, N. V. van Hulst, M. Jørgensen, 2017, Scientific Reports.

On the Saddle-Shaped Nature of 14,15-Dimethylbenzo[s]picene

F. Krebs, M. Jørgensen, M. Larsen, 1999 .

Aesthetically pleasing conjugated polymer:fullerene blends for blue-green solar cells via roll-to-roll processing.

F. Krebs, K. Choudhury, F. So, 2012, ACS applied materials & interfaces.

Making Ends Meet: Flow Synthesis as the Answer to Reproducible High‐Performance Conjugated Polymers on the Scale that Roll‐to‐Roll Processing Demands

Mikkel Jørgensen, Roar R. Søndergaard, Frederik C. Krebs, 2015 .

High-throughput roll-to-roll X-ray characterization of polymer solar cell active layers

Mikkel Jørgensen, Andreas Menzel, Frederik C. Krebs, 2012 .

Synthesis of an all-in-one molecule (for organic solar cells).

Ole Hagemann, Mikkel Jørgensen, F. Krebs, 2006, The Journal of organic chemistry.

Controlling the Energy Levels of Conducting Polymers. Hydrogen versus Fluorine in Poly(dialkylterphenylenevinylene)s

Mikkel Jørgensen, Frederik C. Krebs, F. Krebs, 2002 .

Roll‐Coated Fabrication of Fullerene‐Free Organic Solar Cells with Improved Stability

F. Krebs, Hongzheng Chen, E. Bundgaard, 2015, Advanced science.

One- and two-photon photosensitized singlet oxygen production: characterization of aromatic ketones as sensitizer standards.

O. Christiansen, M. Jørgensen, M. Paterson, 2007, Journal of Physical Chemistry A.

A self‐calibrating led‐based solar test platform

Mikkel Jørgensen, Frederik C. Krebs, Kristian O. Sylvester-Hvid, 2011 .

A rational method for developing and testing stable flexible indium- and vacuum-free multilayer tandem polymer solar cells comprising up to twelve roll processed layers

Suren A. Gevorgyan, Mikkel Jørgensen, Markus Hösel, 2014 .

Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration

Gülşah Y. Uzunoğlu, F. Krebs, Y. Galagan, 2012 .

Simultaneous multilayer formation of the polymer solar cell stack using roll-to-roll double slot-die coating from water

Mikkel Jørgensen, Kion Norrman, Frederik C. Krebs, 2012 .

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes.

F. Krebs, Jeongdai Jo, R. Søndergaard, 2012, Nanoscale.

On the stability of a variety of organic photovoltaic devices by IPCE and in situ IPCE analyses--the ISOS-3 inter-laboratory collaboration.

David S. Germack, Gülşah Y. Uzunoğlu, Y. Galagan, 2012, Physical chemistry chemical physics : PCCP.

Low Band Gap Polymers for Roll-to-Roll Coated Polymer Solar Cells

F. Krebs, E. Bundgaard, O. Hagemann, 2010 .

Upscaling of polymer solar cell fabrication using full roll-to-roll processing.

F. Krebs, T. Tromholt, M. Jørgensen, 2010, Nanoscale.

Roll‐to‐Roll Printed Silver Nanowire Semitransparent Electrodes for Fully Ambient Solution‐Processed Tandem Polymer Solar Cells

E. Bundgaard, Martin Helgesen, R. Søndergaard, 2015 .

Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods.

F. Krebs, K. Norrman, E. Bundgaard, 2011, ACS nano.

Optical coherence tomography (OCT) as a 3-dimensional imaging technique for non-destructive testing of roll-to-roll coated polymer solar cells

F. Krebs, T. Jørgensen, M. Jørgensen, 2013 .

High Carrier Mobility in a Series of New Semiconducting PPV-Type Polymers

Mikkel Jørgensen, Frederik C. Krebs, F. Krebs, 2003 .

Low Band Gap Polymers for Roll-to-Roll Coated Organic Photovoltaics – Design, Synthesis and Characterization

F. Krebs, E. Bundgaard, O. Hagemann, 2011 .

Easy access to 3,8-Diaryldifurano[2,3-a:2',3'-f]naphthalenes. A new extended aromatic system.

F. Krebs, M. Jørgensen, K. Bechgaard, 2000, The Journal of organic chemistry.

Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules.

R. Søndergaard, M. Jørgensen, S. Gevorgyan, 2016, Nanoscale.

Improving the Operational Stability of PBDTTTz‐4 Polymer Solar Cells Modules by Electrode Modification

Martin Helgesen, R. Søndergaard, M. Jørgensen, 2016 .

Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration

David S. Germack, Gülşah Y. Uzunoğlu, F. Krebs, 2012 .