A. Mostaed

发表

High electromechanical response in the non morphotropic phase boundary piezoelectric system PbTiO3−Bi(Zr1/2Ni1/2)O3

I. Reaney, Rishikesh Pandey, R. Ranjan, 2018, Physical Review B.

Investigation on preparation of Al–4.5%Cu/SiCp nanocomposite powder via mechanical milling

A. Mostaed, E. Mostaed, H. Saghafian, 2012 .

High strain (0.4%) Bi(Mg 2/3 Nb 1/3 )O 3 ‐BaTiO 3 ‐BiFeO 3 lead‐free piezoelectric ceramics and multilayers

X. Tan, D. Sinclair, I. Reaney, 2018, Journal of the American Ceramic Society.

(Ba, Sr)(Ti, Mn)O3 Perovskite Films for Co-Planar Waveguide Tunable Microwave Phase Shifters

S. Gao, Q. Luo, I. Reaney, 2018, 2018 13th European Microwave Integrated Circuits Conference (EuMIC).

Tailoring the Mechanical and Degradation Performance of Mg-2.0Zn-0.5Ca-0.4Mn Alloy Through Microstructure Design

J. Drelich, I. Reaney, A. Mostaed, 2020, JOM.

Dataset to support article: 'Atomic structure study of the pyrochlore Yb2Ti2O7 and its relationship with low-temperature magnetic order'

R. Beanland, M. Lees, A. Mostaed, 2017 .

Effect of reinforcing particle type on morphology and age-hardening behavior of Al–4.5 wt.% Cu based nanocomposites synthesized through mechanical milling

A. Mostaed, E. Mostaed, H. Saghafian, 2013 .

Preparation of Nanostructured Al-4.5wt%Mg Powder via Mechanical Alloying Process

A. Mostaed, E. Mostaed, A. Shokuhfar, 2011 .

Effect of SiC Particles Volume Fraction on the Mutual Diffusion of Al and Cu during Fabrication of Al-4.5wt%Cu/SiC via Mechanical Alloying

A. Mostaed, E. Mostaed, H. Saghafian, 2009 .

Origin of improved tunability and loss in N2 annealed barium strontium titanate films

D. Sinclair, I. Reaney, A. Mostaed, 2020, Physical Review Materials.

High discharge energy density in novel K1/2Bi1/2TiO3-BiFeO3 based relaxor ferroelectrics

Bin Zhang, D. Sinclair, I. Reaney, 2022, Journal of the European Ceramic Society.

Ultrahigh energy density in short-range tilted NBT-based lead-free multilayer ceramic capacitors by nanodomain percolation

Ge Wang, Dejun Li, I. Reaney, 2021 .

Characterising oxygen atoms in perovskite and pyrochlore oxides using ADF-STEM at a resolution of a few tens of picometers

D. Sinclair, I. Reaney, R. Beanland, 2020, 2009.10037.

Improved Biocompatibility of Zn-Ag-based Stent Materials by Microstructure Refinement.

J. Drelich, K. Carlson, D. Dragomir-Daescu, 2022, Acta biomaterialia.

Atomic structure study of the pyrochlore y b2 T i2 O7 and its relationship with low-temperature magnetic order

R. Beanland, M. Lees, A. Mostaed, 2017 .

Electronically Beam-steerable Dual-band Reflectarray for Satellite Communications

S. Gao, Q. Luo, I. Reaney, 2019, 2019 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC).

High quality factor cold sintered Li2MoO4BaFe12O19 composites for microwave applications

D. Sinclair, W. Whittow, I. Reaney, 2019, Acta Materialia.

Towards revealing key factors in mechanical instability of bioabsorbable Zn-based alloys for intended vascular stenting.

J. Drelich, I. Reaney, J. Goldman, 2020, Acta biomaterialia.

Towards Revealing Key Factors in Mechanical Instability of Bioabsorbable Zn-Based Alloys for Vascular Stenting

J. Drelich, I. Reaney, J. Goldman, 2019, Social Science Research Network.

Novel Zn-based alloys for biodegradable stent applications: Design, development and in vitro degradation.

D Mantovani, A. Demir, B. Previtali, 2016, Journal of the mechanical behavior of biomedical materials.

Fabrication, mechanical properties and in vitro degradation behavior of newly developed ZnAg alloys for degradable implant applications.

M. Vedani, D. Mantovani, R. Beanland, 2017, Materials science & engineering. C, Materials for biological applications.

Electron-irradiation induced defects in Yb 2 Ti 2.05 O 7

R. Beanland, M. Lees, A. Mostaed, 2018 .

Characterizing oxygen atoms in perovskite and pyrochlore oxides using ADF-STEM at a resolution of a few tens of picometers

D. Sinclair, I. Reaney, R. Beanland, 2021 .

Wear induced ripplocation during dry sliding wear of TiC-based composite

W. M. Rainforth, A. Mostaed, Carl Magnus, 2020, Wear.

Atomic structure and interface chemistry in a high-stiffness and high-strength Al–Si–Mg/TiB2 nanocomposite

R. Beanland, A. Mostaed, S. Ji, 2019, Materials Science and Engineering: A.

Synthesis and microstructural evolution in ternary metalloceramic Ti3SiC2 consolidated via the Maxthal 312 powder route

W. M. Rainforth, A. Mostaed, Le Ma, 2020 .

Synthesis and microstructural evolution of ternary metalloceramic Ti 3 SiC 2 via the Maxthal 312 powder route

W. M. Rainforth, A. Mostaed, Le Ma, 2021 .

Fatigue resistant lead-free multilayer ceramic capacitors with ultrahigh energy density

Ge Wang, D. Sinclair, I. Reaney, 2020, Journal of Materials Chemistry A.

Superior energy density through tailored dopant strategies in multilayer ceramic capacitors

Ge Wang, Dejun Li, D. Sinclair, 2020, Energy & Environmental Science.

Effects of Milling Time and Impact Force on the Mutual Diffusion of Cu and Fe during Synthesis of Nanostructured Fe-50%Cu Alloy via Mechanical Alloying Process

H. Kaffash, A. Mostaed, E. Mostaed, 2010 .

Data for Electron-irradiation induced defects in Yb2Ti2.05O7

R. Beanland, M. Lees, A. Mostaed, 2017 .

Development and characterization of a novel high entropy alloy strengthened through concurrent spinodal decomposition and precipitation

J. Fiocchi, A. Tuissi, R. Casati, 2023, Journal of Alloys and Compounds.

Enhanced cryogenic and ambient temperature mechanical properties of CoCuFeMnNi high entropy alloy through controlled heat treatment

J. Fiocchi, A. Tuissi, R. Casati, 2022, Journal of Alloys and Compounds.

Electron counting detectors in scanning transmission electron microscopy via hardware signal processing

L. Jones, J. J. Peters, A. Mostaed, 2023, Nature communications.

A New Approach for 3D Quantitative STEM Using Defocus Corrected Electron Ptychography

P. Nellist, A. Kirkland, A. Mostaed, 2022, Microscopy and Microanalysis.

The Influence of Milling Time and Impact Force on the Mutual Diffusion of Al and Cu during Synthesis of Al-4.5wt%Cu Alloy via Mechanical Alloying

A. Mostaed, E. Mostaed, H. Saghafian, 2009 .