H. Ji

发表

Enhanced piezoelectric properties of 0.55Pb(Ni1/3Nb2/3)O3-0.135PbZrO3- 0.315PbTiO3 ternary ceramics by optimizing sintering temperature

Kongjun Zhu, J. Qiu, Jianzhou Du, 2014, Journal of Electroceramics.

Effects of different Sb addition on [(K0.44Na0.52) Li0.04](Nb0.9-XTa0.1Sbx)O3 lead-free piezoceramics

H. Ji, Dao-li Wang, J. Qiu, 2008, 2008 Symposium on Piezoelectricity, Acoustic Waves, and Device Applications.

Multi-damage localization on large complex structures through an extended delay-and-sum based method

Jinhao Qiu, Chao Zhang, Li Cheng, 2016 .

Low reflection effect by 3D printed functionally graded acoustic black holes

D. Inman, Hui Zhang, J. Qiu, 2019, Journal of Sound and Vibration.

Application of neural network to model stiffness degradation for composite laminates under cyclic loadings

Chao Zhang, J. Qiu, H. Ji, 2021 .

Prediction and optimization of poling condition for PZT based-macro fiber composites with interdigitated electrodes

J. Qiu, H. Ji, Jiao Qu, 2021, Journal of Alloys and Compounds.

An imaging method for impact localization using metal-core piezoelectric fiber rosettes

Chao Zhang, Jinhao Qiu, Hongli Ji, 2015 .

Four vectors of Lamb waves in composites: Semianalysis and numerical simulation

Ning Hu, Jinhao Qiu, Hongli Ji, 2013 .

Modeling of Lamb waves in composites using new third-order plate theories

J. Qiu, H. Ji, Jinling Zhao, 2014 .

Investigations on flexural wave propagation and attenuation in a modified one-dimensional acoustic black hole using a laser excitation technique

Li Cheng, J. Qiu, Jing Luo, 2018 .

Wave Energy Focalization in a Plate With Imperfect Two-Dimensional Acoustic Black Hole Indentation

Li Cheng, J. Qiu, H. Ji, 2016 .

Semi-active piezoelectric structural damping adjustment and enhancement by synchronized switching on energy injection technique

Xuan Liu, J. Qiu, A. Badel, 2022, Journal of Sound and Vibration.

Enhancement of vibration based energy harvesting using compound acoustic black holes

Li Cheng, J. Qiu, Yipeng Wu, 2019, Mechanical Systems and Signal Processing.

Dynamic and Static Properties of Double-Layered Compound Acoustic Black Hole Structures

Li Cheng, J. Qiu, Liling Tang, 2017 .

Characterization of acoustic black hole effect using a one-dimensional fully-coupled and wavelet-decomposed semi-analytical model

Jinhao Qiu, Li Cheng, Hongli Ji, 2016 .

Enhancement of Wave Energy Dissipation in Two-Dimensional Acoustic Black Hole by Simultaneous Optimization of Profile and Damping Layer

J. Qiu, H. Ji, Wei Huang, 2021 .

Energy Focusing Effect Of A Novel Acoustic Black Hole Absorber On Flexural Waves In Box-Type Structure

H. Ji, J. Qiu, Puthoff He, 2021, 2020 15th Symposium on Piezoelectrcity, Acoustic Waves and Device Applications (SPAWDA).

Noise reduction inside a cavity coupled to a flexible plate with embedded 2-D acoustic black holes

Xiaodong Wang, Li Cheng, Chao Zhang, 2019, Journal of Sound and Vibration.

Wavenumber domain analyses of vibro-acoustic decoupling and noise attenuation in a plate-cavity system enclosed by an acoustic black hole plate.

Xiaodong Wang, Li Cheng, J. Qiu, 2019, The Journal of the Acoustical Society of America.

FORMATION OF VIBRATION ATTENUATION IN PLATE BY INSERTING ACOUSTIC BLACK HOLE INDENTATIONS WITHOUT DAMPING LAYER TREATMENT

Li Cheng, J. Qiu, H. Ji, 2019 .

Enhancement of piezoelectric energy harvesting using ABH structural tailoring

Li Cheng, Chao Zhang, Hongli Ji, 2018, 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

Dramatically improved piezoelectric properties of poly(vinylidene fluoride) composites by incorporating aligned TiO2@MWCNTs

Jing Wang, Jinhao Qiu, Hongli Ji, 2016 .

Design methodology of a frequency up-converting energy harvester based on dual-cantilever and pendulum structures

Fumio Kojima, J. Qiu, Yipeng Wu, 2019, AIP Advances.

Investigation of an ultra-low frequency piezoelectric energy harvester with high frequency up-conversion factor caused by internal resonance mechanism

Sen Li, J. Qiu, K. Fan, 2022 .

A piezoelectric spring pendulum oscillator used for multi-directional and ultra-low frequency vibration energy harvesting

Jinhao Qiu, Hongli Ji, Yipeng Wu, 2018, Applied Energy.

An internal resonance based frequency up-converting energy harvester

Jinhao Qiu, Hongli Ji, Yipeng Wu, 2018, Journal of Intelligent Material Systems and Structures.

Novel Approach of Self-Sensing Actuation for Active Vibration Control

Mohamed Ichchou, Jinhao Qiu, Hongli Ji, 2011 .

Application of low frequency ECT method in noncontact detection and visualization of CFRP material

Enrong Wang, Jinhao Qiu, Toshiyuki Takagi, 2017 .

Research advances in eddy current testing for maintenance of carbon fiber reinforced plastic composites

Jinhao Qiu, Toshiyuki Takagi, Hongli Ji, 2016 .

Detection of delamination in laminated CFRP composites using eddy current testing: Simulation and experimental study

T. Takagi, J. Qiu, H. Ji, 2018 .

Role of interlaminar interface on bulk conductivity and electrical anisotropy of CFRP laminates measured by eddy current method

Ning Hu, Jinhao Qiu, Toshiyuki Takagi, 2014 .

Multi-modal vibration control using a synchronized switch based on a displacement switching threshold

Yuansheng Chen, Jinhao Qiu, Adrien Badel, 2009 .

Research on applications of piezoelectric materials in smart structures

J. Qiu, H. Ji, 2011 .

Two-mode vibration control of a beam using nonlinear synchronized switching damping based on the maximization of converted energy

Jinhao Qiu, Adrien Badel, Hongli Ji, 2010 .

Semi-active Vibration Control Based on Switched Piezoelectric Transducers

Jinhao Qiu, Hongli Ji, Pinqi Xia, 2010 .

Numerical analysis on shape memory alloy–based adaptive shock control bump

J. Qiu, H. Ji, Lin Hao, 2018, Journal of Intelligent Material Systems and Structures.

Use of shape memory alloy for active shock control bump application

J. Qiu, H. Ji, Lin Hao, 2021, Journal of Intelligent Material Systems and Structures.

Phase evolution of (K, Na)NbO3 powder prepared by high temperature mixing under hydrothermal conditions

Kongjun Zhu, J. Qiu, H. Ji, 2010 .

Effects of Sb-doping on the formation of (K, Na)(Nb, Sb)O3 solid solution under hydrothermal conditions

Kongjun Zhu, J. Qiu, H. Ji, 2010 .

Flexible polyvinylidene fluoride based nanocomposites with high and stable piezoelectric performance over a wide temperature range utilizing the strong multi-interface effect

Kongjun Zhu, J. Qiu, H. Ji, 2019, Composites Science and Technology.

Flexible textured MnO2 nanorods/ PVDF hybrid films with superior piezoelectric performance for energy harvesting application

J. Qiu, H. Ji, Lu Yang, 2020 .

Damage localization using warped frequency transform in active structural health monitoring

C. Zhang, J. Qiu, H. Ji, 2015 .

A semi-analytical boundary collocation solver for the inverse Cauchy problems in heat conduction under 3D FGMs with heat source

C. Alves, Zhuojia Fu, Qiang Xi, 2019, Numerical Heat Transfer, Part B: Fundamentals.

Simultaneously realizing ultra-high energy density and discharge efficiency in PVDF composites loaded with highly aligned hollow MnO2 microspheres

J. Qiu, Zhifeng Wang, H. Ji, 2020 .

Effect of rolling on structure and ferroelectric properties of poly(vinylidenefluoride) with presence of multiwalled carbon nanotubes

J. Qiu, H. Ji, L. Yang, 2014 .

Effect of temperature on the crystalline phase and dielectric and ferroelectric properties of poly(vinylidene fluoride) film

Kongjun Zhu, J. Qiu, H. Ji, 2014 .

Enhanced electrical properties of multiwalled carbon nanotube/poly(vinylidenefluoride) films through a rolling process

Kongjun Zhu, J. Qiu, Jing Wang, 2014, Journal of Materials Science: Materials in Electronics.

Mode conversion behavior of guided wave in glass fiber reinforced polymer with fatigue damage accumulation

Chao Zhang, J. Qiu, H. Ji, 2020 .

Isopropanol-assisted hydrothermal synthesis of (K, Na)NbO3 piezoelectric ceramic powders

Kongjun Zhu, J. Qiu, H. Ji, 2010 .

Tunable piezoelectric performance of flexible PVDF based nanocomposites from MWCNTs/graphene/MnO2 three-dimensional architectures under low poling electric fields

J. Qiu, M. Cheng, H. Ji, 2018 .

A design of honeycomb sandwich based on Piezoelectric Fiber Composites

H. Ji, J. Qiu, R. Nie, 2010, Proceedings of the 2010 Symposium on Piezoelectricity, Acoustic Waves and Device Applications.

Synthesis of (K, Na) (Nb, Ta)O3 lead-free piezoelectric ceramic powders by high temperature mixing method under hydrothermal conditions

Kongjun Zhu, J. Qiu, Xuming Pang, 2012 .

Two-Step Sintering of the Pure K0.5Na0.5NbO3 Lead-Free Piezoceramics and Its Piezoelectric Properties

Kongjun Zhu, J. Qiu, H. Ji, 2009 .

Design, construction, and modeling of aircraft door sealing plate based on SMAs

C. Zhang, J. Qiu, Chen Zhang, 2022, International Journal of Smart and Nano Materials.

Reconstruction of the nine stiffness coefficients of composites using a laser generation based imaging method

J. Qiu, H. Ji, Jinling Zhao, 2016 .

High breakdown strength and outstanding piezoelectric performance in flexible PVDF based percolative nanocomposites through the synergistic effect of topological-structure and composition modulations

Rujie Sun, J. Qiu, M. Cheng, 2018, Composites Part A: Applied Science and Manufacturing.

MWCNTs-TiO2 core-shell nanoassemblies for fabrication of poly(vinylidene fluoride) based composites with high breakdown strength and discharged energy density

Kongjun Zhu, J. Qiu, Jing Wang, 2016, Journal of Polymer Research.

Hydrothermal synthesis of sodium niobate with controllable shape and structure

Kongjun Zhu, J. Qiu, Xiaohui Wang, 2012 .

Mode Conversion in Composite Material with Matrix Cracks

Chao Zhang, H. Ji, J. Qiu, 2019, 2019 14th Symposium on Piezoelectrcity, Acoustic Waves and Device Applications (SPAWDA).

Characterization and synthesis of KTa0.1Nb0.9O3 particles via high temperature mixing method under hydrothermal conditions

Kongjun Zhu, J. Qiu, H. Ji, 2012 .

A new design of unsymmetrical shunt circuit with negative capacitance for enhanced vibration control

Chao Zhang, J. Qiu, Yipeng Wu, 2021 .

Semi-active vibration control based on synchronously switched piezoelectric actuators

C. Zhang, J. Qiu, Yipeng Wu, 2019, International Journal of Applied Electromagnetics and Mechanics.

Superharmonic vibration and its reduction in SSD control by increase of voltage inversion time

Li Cheng, J. Qiu, Yipeng Wu, 2018, Smart Materials and Structures.

A low-power circuit for piezoelectric vibration control by synchronized switching on voltage sources

M. Balsi, Kongjun Zhu, J. Qiu, 2010, 1007.3596.

Self-powered structural vibration damping based on the self-sensing semi-passive technique

Kongjun Zhu, J. Qiu, H. Ji, 2009 .

Temperature dependent magnetism modulated by electric fields at the NiFe/PZT interface

Hongtao Wu, H. Ji, S. Zhou, 2019, Journal of Magnetism and Magnetic Materials.

Training, Control and Application of SMA-Based Actuators with Two-Way Shape Memory Effect

C. Zhang, J. Qiu, Chen Zhang, 2023, Actuators.

Sol–gel synthesis, characterization and microwave absorbing properties of nano sized spherical particles of La0.8Sr0.2Mn0.8Fe0.2O3

Kongjun Zhu, J. Qiu, H. Ji, 2012 .

Fatigue damage characterization for composite laminates using deep learning and laser ultrasonic

Chao Zhang, J. Qiu, H. Ji, 2021, Composites Part B: Engineering.

Sol-gel processing and characterization of potassium niobate nano-powders by an EDTA/citrate complexing method

Kongjun Zhu, J. Qiu, Xuming Pang, 2012 .

Enhanced dielectric tunability of BaxSr1−xTiO3–MgO composite ceramics co-modified with CuO and MnO2

Kongjun Zhu, J. Qiu, Jianzhou Du, 2015, Journal of Materials Science: Materials in Electronics.

Sol-hydrothermal synthesis and characterization of lead zirconate titanate fine particles

Kongjun Zhu, J. Qiu, Xuming Pang, 2013 .

Effect of CuO on dielectric and piezoelectric properties of (K0.4425Na0.52Li0.0375)(Nb0.87Ta0.06Sb0.07)O3 ceramics

Kongjun Zhu, J. Qiu, H. Ji, 2012 .

Temperature stability and fabrication of Pb(Zn1/3Nb2/3)O3–Pb(Zr,Ti)O3 fibers with Pt core

Kongjun Zhu, J. Qiu, Jun Luo, 2012 .

Synthesis of (K,Na)NbO3 particles by traditional hydrothermal method and high-temperature mixing method under hydrothermal–solvothermal conditions

Kongjun Zhu, J. Qiu, H. Ji, 2011 .

Synthesis of (K, Na)NbO3 particles by high temperature mixing method under hydrothermal conditions

Kongjun Zhu, J. Qiu, H. Ji, 2010 .

Investigation of phase diagram and electrical properties of xPb(Mg1/3Nb2/3)O3–(1 − x)Pb(Zr0.4Ti0.6)O3 ceramics

Kongjun Zhu, J. Qiu, Jing Wang, 2014, Journal of Materials Science: Materials in Electronics.

Enhanced dielectric and ferroelectric properties induced by TiO2@MWCNTs nanoparticles in flexible poly(vinylidene fluoride) composites

J. Qiu, Jing Wang, H. Ji, 2014 .

Effects of Fe2O3 doping on the microstructure and piezoelectric properties of 0.55Pb(Ni1/3Nb2/3)O3–0.45Pb(Zr0.3Ti0.7)O3 ceramics

J. Qiu, Jun Luo, Xuming Pang, 2012 .

Highly sensitive, reliable and flexible pressure sensor based on piezoelectric PVDF hybrid film using MXene nanosheet reinforcement

J. Qiu, Zhifeng Wang, H. Ji, 2021 .

Multi-modal vibration control using amended disturbance observer compensation

Kongjun Zhu, Juan Li, Hong Li Ji, 2012 .

Piezoelectric vibration control for all-clamped panel using DOB-based optimal control

Jinhao Qiu, Juan Li, Hongli Ji, 2011 .

The Application of Piezoelectric Materials in Smart Structures in China

Jinhao Qiu, Hongli Ji, J. Qiu, 2010 .

Fabrication of 0.655Pb(Mg1/3Nb2/3)O3-0.345PbTiO3 functionally graded piezoelectric actuator by tape-casting

J. Qiu, Jun Luo, H. Ji, 2011 .

Effects of the Calcining Temperature on the Piezoelectric and Dielectric Properties of 0.55PNN-0.45PZT Ceramics

J. Qiu, Jun Luo, Xuming Pang, 2011 .

Numerical analysis on thermo-mechanical behavior of shape memory alloy strip with two-way shape memory effect

J. Qiu, H. Ji, Lin Hao, 2015 .

Influence of sintering temperature on microstructure and electric properties of CuO doped alkaline niobate-based lead-free ceramics

J. Qiu, H. Ji, B. Shao, 2012, Journal of Materials Science: Materials in Electronics.

Origin of the low piezoelectric coefficient of metal core 0.3Pb(Zn1/3Nb2/3)O3–0.7Pb(Zr,Ti)O3 piezoelectric fibers

J. Qiu, Jun Luo, H. Ji, 2013 .

Piezoelectric devices and their application in smart structures

H. Ji, J. Qiu, Jian Liu, 2008, 2008 Symposium on Piezoelectricity, Acoustic Waves, and Device Applications.

Analysis of ray trajectories of flexural waves propagating over generalized acoustic black hole indentations

Li Cheng, J. Qiu, H. Ji, 2018 .

Flexible and Transparent Ionic Liquids/Poly(vinylidene fluoride) Composition‐Gradient Piezo‐Active Composites for Highly Sensitive Pressure Sensor

J. Qiu, H. Ji, Huajie Huang, 2022, Advanced Electronic Materials.

Preparation and dielectric properties of a polyurethane elastomer filled with resol-derived ordered mesoporous carbon

J. Qiu, Tian Chen, H. Ji, 2013, Journal of Materials Science: Materials in Electronics.

The effect of processing conditions on the crystal structure and electroactive properties of poly(vinylidene fluoride)/ multi-walled carbon nanotubes nanocomposites

Jinhao Qiu, Lu Yang, Hongli Ji, 2014, Smart Structures.

Structural, magnetic and ferroelectric properties of Sm and Mn co-substituted BiFeO3 ceramics with composition near the morphotropic phase boundary

Hongtao Wu, H. Ji, S. Zhou, 2018, Ceramics International.

Active control of sound transmission using a hybrid/blind decentralized control approach

Ming Yuan, Roger Ohayon, Hongli Ji, 2015 .

TwIST sparse regularization method using cubic B-spline dual scaling functions for impact force identification

J. Qiu, H. Ji, Xiaoyu Wang, 2022, Mechanical Systems and Signal Processing.

Semi-active vibration control of an aircraft panel using synchronized switch damping method

Hongli Ji, Hong Nie, Li Cheng, 2014 .

A temperature field reconstruction method for spacecraft leading edge structure with optimized sensor array

Chao Zhang, J. Qiu, H. Ji, 2021, Journal of Intelligent Material Systems and Structures.

Comparative investigations on dielectric, piezoelectric properties and humidity resistance of PZT–SKN and PZT–SNN ceramics

J. Qiu, H. Ji, Kai Wen, 2015, Journal of Materials Science: Materials in Electronics.

Analysis of energy conversion in switched-voltage control with arbitrary switching frequency

Daniel J. Inman, Jinhao Qiu, Hongli Ji, 2012 .

Semi-active vibration suppression by a novel synchronized switch circuit with negative capacitance

Jinhao Qiu, Toshiyuki Takagi, Jun Cheng, 2011 .

Microstructure, temperature stability and electrical properties of ZnO-modified Pb(Ni1/3Nb2/3)O3–Pb(Fe1/2Nb1/2)O3–Pb(Zr0.3Ti0.7)O3 piezoelectric ceramics

J. Qiu, Jianzhou Du, H. Ji, 2013 .

Sensitivity kernels of guided wave velocities in composites

J. Qiu, H. Ji, Jinling Zhao, 2022, European Journal of Mechanics - A/Solids.

OS08F108 Lamb Wave Sensing Using Metal-core Piezoelectric Fibers

J. Qiu, H. Ji, Jian Liu, 2011 .

The constitutive equations of half coated metal core piezoelectric fiber

Jinhao Qiu, Hongli Ji, Kongjun Zhu, 2009 .

A 2-degree-of-freedom cubic nonlinear piezoelectric harvester intended for practical low-frequency vibration

Jinhao Qiu, Hongli Ji, Lei Han, 2017 .

Modeling and numerical analysis of a three-dimensional shape memory alloy shell structure

Jinhao Qiu, Hongli Ji, Rui Nie, 2012, Other Conferences.

The synergism of peak to peak value, frequency and superimposed DC bias voltage on electric-field-induced strain of PZT based-macro fiber composites

J. Qiu, H. Ji, Qu Jiao, 2019 .

Characterization of fatigue damages in composite laminates using Lamb wave velocity and prediction of residual life

Jinhao Qiu, Chao Zhang, Hongli Ji, 2017 .

Thermomechanical training and structural tests for adaptive SMA bumps with two-way shape memory effect

J. Qiu, H. Ji, Chen Zhang, 2021, Journal of Intelligent Material Systems and Structures.

Smart Skin and Actuators for Morphing Structures

Zhiwei Xu, Chen Wang, Hongli Ji, 2014 .

Development of a Morphing Skin Based on the Honeycomb Reinforced Elastomer

H. Ji, J. Qiu, Chen Wang, 2012 .

Semi-active vibration control based on unsymmetrical synchronized switching damping: Circuit design

Jinhao Qiu, Jin Zhang, Li Cheng, 2016 .

Non-symmetrical semi-active vibration control based on synchronized switching damping

Jinhao Qiu, Jin Zhang, Li Cheng, 2014, Smart Structures.

The influence of switching phase and frequency of voltage on the vibration damping effect in a piezoelectric actuator

Jinhao Qiu, Hongli Ji, Pinqi Xia, 2010 .

Energy harvesting and vibration control using piezoelectric elements and a nonlinear approach

J. Qiu, H. Ji, H. Shen, 2009, 2009 18th IEEE International Symposium on the Applications of Ferroelectrics.

Semi-active vibration control using piezoelectric actuators in smart structures

Jinhao Qiu, Kongjun Zhu, Hong-Li Ji, 2009 .

A semi-passive vibration damping system powered by harvested energy

Jinhao Qiu, Hui Shen, Hongli Ji, 2009 .

Enhanced synchronized switch harvesting: a new energy harvesting scheme for efficient energy extraction

Jinhao Qiu, Hui Shen, Hongli Ji, 2010 .

Effect of rolling temperature on the microstructure and electric properties of β-polyvinylidene fluoride films

J. Qiu, H. Ji, Lu Yang, 2018, Journal of Materials Science: Materials in Electronics.

PVDF-Based Composition-Gradient Multilayered Nanocomposites for Flexible High-Performance Piezoelectric Nanogenerators.

J. Qiu, Yipeng Wu, H. Ji, 2020, ACS applied materials & interfaces.

The effect of drilling-induced delamination on tensile strength and prediction of residual strength of carbon fiber-reinforced polymer laminate

W. Yao, J. Qiu, H. Ji, 2016 .

Fatigue property evaluation for fiber reinforced plastics based on mode conversion effect of guided wave

C. Zhang, J. Qiu, H. Ji, 2022, Composites Science and Technology.

A novel method for fatigue delamination simulation in composite laminates

W. Yao, J. Qiu, H. Ji, 2016 .

New method for fabrication of lead-free BaTiO3 piezoelectric ceramics

H. Ji, J. Qiu, Likui Su, 2008, 2008 Symposium on Piezoelectricity, Acoustic Waves, and Device Applications.

Fabrication of lead-free barium titanate piezoelectric ceramics from barium titanate powders with different particle sizes synthesized by hydrothermal method

J. Qiu, H. Ji, A. Totsuka, 2009 .

Comparison between four piezoelectric energy harvesting circuits

Jinhao Qiu, Hao Jiang, Hongli Ji, 2009 .

Wave Attenuation in Additively Manufactured Polymer Acoustic Black Hole Structures Considering the Viscoelastic Effect

J. Qiu, H. Ji, Wei Huang, 2023, Polymers.

A broadband sound-absorbing panel based on the coiled coplanar absorber with multiple absorption peaks

J. Qiu, H. Ji, Lei Han, 2021, Physica Scripta.

Impact localization in anisotropic composite plates based on Bayesian inference

Hongli Ji, Jinhao Qiu, Hongyuan Wang, 2016 .

A Paris-law-informed neural fatigue cohesive model and its application to open-hole composite laminates

C. Zhang, J. Qiu, H. Ji, 2023, International Journal of Solids and Structures.

Ferroelectric and Piezoelectric Properties of Pb(Ni1/3Nb2/3)0.5(Ti0.7Zr0.3)0.5O3 Ceramics Fabricated by Tape-Casting Process

J. Qiu, Jun Luo, H. Ji, 2010 .

Crystallographic study of lead-substituted hydroxyapatite synthesized by high-temperature mixing method under hydrothermal conditions

J. Qiu, H. Ji, A. Onda, 2010 .

Interlaminar contact resistivity and its influence on eddy currents in carbon fiber reinforced polymer laminates

Jinhao Qiu, Toshiyuki Takagi, Hongli Ji, 2018 .

A method for regulating negative Poisson's ratio by a reentrant anti-tetrachiral structure

C. Zhang, J. Qiu, H. Ji, 2022, Mechanics of Advanced Materials and Structures.

Adaptive synchronized switch harvesting: A new piezoelectric energy harvesting scheme for wideband vibrations

Jinhao Qiu, Dawei Liu, Hui Shen, 2015 .

High precision ultrasonic guided wave technique for inspection of power transmission line

Enrong Wang, Jinhao Qiu, Jun Cheng, 2017 .

Response of Metal Core Piezoelectric Fibers to Unsteady Airflows

H. Ji, J. Qiu, K. Zhu, 2010 .

Metal core piezoelectric ceramic fiber rosettes for acousto-ultrasonic source localization in plate structures

Jinhao Qiu, Hongli Ji, Kongjun Zhu, 2010 .

An element-based homogenized model for nonlinear wave interaction with 2D distributed microcracks

C. Zhang, J. Qiu, H. Ji, 2022, Meccanica.

Ultra-high discharged energy density in PVDF based composites through inducing MnO2 particles with optimized geometric structure

J. Qiu, H. Ji, Huajie Huang, 2019, Nano Energy.

Laser-Generated Guided Waves for Damage Detection in Metal-Lined Composite-Overwrapped Pressure Vessels

J. Qiu, H. Ji, Jinling Zhao, 2022, Polymers.

A vibration absorber based on two-dimensional acoustic black holes

Xiaodong Wang, Li Cheng, Chao Zhang, 2021 .

Attenuation band splitting in a finite plate strip with two-dimensional acoustic black holes

Li Cheng, J. Qiu, H. Ji, 2022, Journal of Sound and Vibration.

Tracking control of piezoelectric actuator system using inverse hysteresis model

Jinhao Qiu, Hongli Ji, Yuanseng Chen, 2010 .

Active control of sound transmission through a stiffened panel using a hybrid control strategy

Jinhao Qiu, Ming Yuan, Hongli Ji, 2012 .

Rapid and Visualized Residual Strength Prediction of Scarf-repaired Laminates Using Hierarchical Surrogate Model

C. Zhang, J. Qiu, H. Ji, 2022, Composite Structures.

On the energy release rate extraction and mixed mode behavior of fatigue cohesive model

Chao Zhang, J. Qiu, Yipeng Wu, 2020 .

A frequency up-converting harvester based on internal resonance in 2-DOF nonlinear systems

Jinhao Qiu, Hongli Ji, Yipeng Wu, 2016 .

Solgel Self-Combustion Synthesis and Characterization of La0.8Sr0.2Mn0.8Fe0.2O3

H. Ji, J. Qiu, J. Siddiqui, 2011 .

Simultaneously achieving high discharge energy density and discharge efficiency in P(VDF-CTFE)/PVDF based nanocomposites through topological-structure design and proper doping composition modulation

J. Qiu, H. Ji, Lu Yang, 2023, Journal of Energy Storage.

Achieving superior energy density in ferroelectric P(VDF-HFP) through the employment of dopamine-modified MOFs

J. Qiu, H. Ji, Lu Yang, 2021 .

Poly(acrylonitrile butadiene styrene)/poly(vinylidene fluoride) binary blends films with superior breakdown strength and discharge efficiency

J. Qiu, Hongguang Sun, H. Ji, 2021, Journal of Materials Science: Materials in Electronics.

Multi-scale entropy based damage detection for thermal protection structures with variation of ambient temperature

C. Zhang, J. Qiu, H. Ji, 2022, Journal of Intelligent Materials Systems and Structures.

Single-ply elastic properties determination in CFRP laminates using a combined ultrasonic method

C. Zhang, J. Qiu, H. Ji, 2022, Journal of Intelligent Material Systems and Structures.

Structural damage detections based on a general vibration model identification approach

Chao Zhang, Li Cheng, Hongli Ji, 2019, Mechanical Systems and Signal Processing.

Damage visualization using laser-generated residual guided waves with optimization of laser scanning path

Chao Zhang, J. Qiu, H. Ji, 2022, Mechanical Systems and Signal Processing.

Frequency attenuation band with low vibration transmission in a finite-size plate strip embedded with 2D acoustic black holes

D. Inman, Li Cheng, J. Qiu, 2022 .

Local wavenumber estimation for small damages based on artificial neural network

J. Qiu, H. Ji, Jinling Zhao, 2023, NDT & E International.

A local specific stiffness identification method based on a multi-scale “weak” formulation

Hongli Ji, Chao Zhang, Li Cheng, 2020, Mechanical Systems and Signal Processing.

Impact force reconstruction and localization using Distance-assisted Graph Neural Network

J. Qiu, H. Ji, C. Tao, 2023, Mechanical Systems and Signal Processing.

Modeling hysteresis and creep behavior of macrofiber composite–based piezoelectric bimorph actuator

Yuansheng Chen, Jinhao Qiu, Hongli Ji, 2013 .

Neural cohesive model for delamination simulation in composite laminates under cyclic loadings

C. Zhang, J. Qiu, H. Ji, 2022, International Journal of Fatigue.

Failure probability prediction of delamination under cyclic loading in composite laminates using cohesive interface elements

Chao Zhang, J. Qiu, H. Ji, 2021, Engineering Fracture Mechanics.

Novel electromagnetic modeling approach of carbon fiber-reinforced polymer laminate for calculation of eddy currents and eddy current testing signals

Ning Hu, Jinhao Qiu, Toshiyuki Takagi, 2015 .

Conductivity inversion of unidirectional CFRP laminate based on ECT using neural network

Chao Zhang, J. Qiu, H. Ji, 2020 .

Off-axis estimation of lay-up orientation in CFRP laminated composites using eddy current testing

T. Takagi, J. Qiu, H. Ji, 2019, International Journal of Applied Electromagnetics and Mechanics.

A modified prandtl-ishlinskii model for modeling asymmetric hysteresis of piezoelectric actuators

Yuansheng Chen, Hongli Ji, Hao Jiang, 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

Simultaneously Identification of Thermal Conductivity and Heat Capacity of Thermal Insulation Tile

J. Qiu, H. Ji, Yulin Sun, 2019, International Conference on Mechanical and Aerospace Engineering.

Heat Flux Identification of Aircraft Structure with Artificial Neural Network Compensation

C. Zhang, J. Qiu, H. Ji, 2023, Journal of Thermophysics and Heat Transfer.

Piezoelectric Spring Pendulum Oscillator for Animal/Human Motion Energy Harvesting

Hongli Ji, Jinhao Qiu, Yipeng Wu, 2018, 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

AERODYNAMIC CHARACTERISTIC OF THE ACTIVE COMPLIANT TRAILING EDGE CONCEPT

Dawei Li, Jinhao Qiu, Hongli Ji, 2016 .

Prediction of multiple fatigue crack growth based on modified Paris model with particle filtering framework

C. Zhang, J. Qiu, H. Ji, 2023, Mechanical Systems and Signal Processing.

Coprecipitation-assisted hydrothermal synthesis of PLZT hollow nanospheres

J. Qiu, H. Ji, Lin Bai, 2010 .

Semi-active vibration control based on unsymmetrical synchronized switch damping: Analysis and experimental validation of control performance

Hongli Ji, Hong Nie, Li Cheng, 2016 .

Semi-active noise suppression based on SSD technique using piezoelectric elements

Li Cheng, Hongli Ji, Hong Nie, 2014 .

Sandwich-structured Co3[Co(CN)6]2/P(VDF-HFP) piezoelectric composites with superior electromechanical activity

J. Qiu, H. Ji, Lu Yang, 2020, Journal of Materials Science: Materials in Electronics.

Controlling sound waves in gradient spoof-fluid-spoof waveguides

You-wen Liu, Yangyang Fu, H. Ji, 2023, Applied Physics Letters.

4B16 Influence of Switching Phase and Frequency on the Control Performance of Synchronized Switching Damping Approaches

Jinhao Qiu, Hongli Ji, Daniel Guyomar, 2010 .

A novel modeling and homogenization method of macro fiber composites considering inhomogeneous poling induced by interdigital electrodes

Chao Zhang, H. Ji, C. Tao, 2024, Composite Structures.

Bidirectional energy‐controlled piezoelectric shunt damping technology and its vibration attenuation performance

A. Badel, Yipeng Wu, H. Ji, 2024, International Journal of Mechanical System Dynamics.

Self-powered semi-passive vibration damping system based on self-sensing approach

Jinhao Qiu, Hui Shen, Hongli Ji, 2016, International Symposium on Precision Mechanical Measurements.

Energy conversion and performance of switched-voltage control based on negative capacitance with arbitrary switching frequency

Jinhao Qiu, Hongli Ji, Pinqi Xia, 2012 .

Analysis of energy conversion in two-mode vibration control using synchronized switch damping approach

Jinhao Qiu, Hongli Ji, Pinqi Xia, 2011 .

Application of a negative capacitance circuit in synchronized switch damping techniques for vibration suppression

Daniel J. Inman, Jinhao Qiu, Jun Cheng, 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

An Improved System of Active Noise Isolation Using a Self-sensing Actuator and Neural Network

Jinhao Qiu, Hongli Ji, Kongjun Zhu, 2009 .

Coupling analysis of energy conversion in multi-mode vibration structural control using a synchronized switch damping method

Daniel J. Inman, Jinhao Qiu, Hongli Ji, 2011 .