Inyoung Kim

发表

Effects of Solvent Type on Low-Temperature Sintering of Silver Oxide Paste to Form Electrically Conductive Silver Film

Inyoung Kim, Sang-ki Chun, 2011 .

Design and fabrication of printed electrowetting-on-dielectric device

Inyoung Kim, Inyoung Kim, Taik-Min Lee, 2015 .

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes.

Mikkel Jørgensen, Jeongdai Jo, Markus Hösel, 2012, Nanoscale.

Tension modeling and precise tension control of roll-to-roll system for flexible electronics

Dongho Oh, Inyoung Kim, Taik-Min Lee, 2021 .

Fabrication of replica cliché with fine pattern using reverse offset printing process

Dongho Oh, Inyoung Kim, Taik-Min Lee, 2018 .

Registration error analysis and compensation of roll-to-roll screen printing system for flexible electronics

Dongho Oh, Inyoung Kim, Taik-Min Lee, 2021, Flexible and Printed Electronics.

Synthesis and characterization of low temperature Sn nanoparticles for the fabrication of highly conductive ink

Hyuck-Mo Lee, Inyoung Kim, Y. Jo, 2011, Nanotechnology.

Effect of particle size distribution on the mechanical and electrical properties of reverse-offset printed Sn–Ag–Cu solder bumps

Hoo-Jeong Lee, Inyoung Kim, Jaehyeong Jeong, 2018, Journal of Materials Science: Materials in Electronics.

Effect of microstructure on electrical and mechanical properties: Impurities of inkjet-printed Ag and Cu interconnects

Young‐Chang Joo, Hyunchul Jung, J. Joung, 2008, 2008 58th Electronic Components and Technology Conference.

Design and fabrication of printed transparent electrode with silver mesh

Jeongdai Jo, Inyoung Kim, Taik-Min Lee, 2012 .

Transparent conductive film with printable embedded patterns for organic solar cells

Jun Woo Kim, Jeongdai Jo, Inyoung Kim, 2013 .

Roll-offset printed transparent conducting electrode for organic solar cells

Yeonkyeong Ju, Inyoung Kim, Taik-Min Lee, 2015 .

Self-patterning of fine metal electrodes by means of the formation of isolated silver nanoclusters embedded in polyaniline

Inyoung Kim, Dong-Youn Shin, 2009, Nanotechnology.

Hybrid fabrication of LED matrix display on multilayer flexible printed circuit board

Inyoung Kim, Taik-Min Lee, Yoonkap Kim, 2021, Flexible and Printed Electronics.

Hybrid electrohydrodynamic atomization of nanostructured silver top contact for inverted organic solar cells

K. Choi, Inyoung Kim, Taik-Min Lee, 2014 .

Screen printed silver top electrode for efficient inverted organic solar cells

K. Choi, Inyoung Kim, Taik-Min Lee, 2015 .

Microstructure and Electrical Resistivity of Ink-Jet Printed Nanoparticle Silver Films under Isothermal Annealing

Young‐Chang Joo, Hyunchul Jung, J. Joung, 2007 .

Experimental Qualification of the Process of Electrostatic Spray Deposition

Inyoung Kim, Taik-Min Lee, Dongwoo Kang, 2019, Coatings.

A study on the enhancement of printing location accuracy in a roll-to-roll gravure offset printing system

Sang Ho Park, Jeongdai Jo, Dong Soo Kim, 2013 .

Effects of the Al cathode evaporation rate on the performance of organic solar cells

Jeongdai Jo, Inyoung Kim, Taik-Min Lee, 2012 .

IoT device fabrication using roll-to-roll printing process

Inyoung Kim, Taik-Min Lee, T. Phung, 2021, Scientific Reports.

Reliability of gravure offset printing under various printing conditions

Inyoung Kim, Dong-Soo Kim, Inyoung Kim, 2010 .

Composition effect on high frequency properties of carbonyl-iron composites

Seok Bae, Inyoung Kim, Jongryoul Kim, 2008 .

Empirical design of slot-die having shallow reservoir for thin-film printed electronics.

Dongho Oh, Inyoung Kim, Taik-Min Lee, 2018, The Review of scientific instruments.

Improvement of Inverted Hybrid Organic Light-emitting Diodes Properties with Bar-coating Process

Inyoung Kim, Taik-Min Lee, Jong-Su Yu, 2013 .

A Simple Process for Synthesis of Ag Nanoparticles and Sintering of Conductive Ink for Use in Printed Electronics

Inyoung Kim, Hyuck-Mo Lee, Inyoung Kim, 2011, Journal of Electronic Materials.

Effect of Microstructural Development on Mechanical and Electrical Properties of Inkjet-Printed Ag Films

Inyoung Kim, Hyun Chul Jung, Jongryoul Kim, 2008 .

AI-Aided Printed Line Smearing Analysis of the Roll-to-Roll Screen Printing Process for Printed Electronics

B. Ryu, Inyoung Kim, Taik-Min Lee, 2022, International Journal of Precision Engineering and Manufacturing-Green Technology.

All-solution-processed PbS quantum dot solar modules.

Jung-Hoon Song, Yeonkyeong Ju, H. Shim, 2015, Nanoscale.

Roll offset printing process based on interface separation for fine and smooth patterning

Inyoung Kim, Inyoung Kim, Taik-Min Lee, 2013 .

Investigation on synchronization of the offset printing process for fine patterning and precision overlay

Jeongdai Jo, Young-Man Choi, Inyoung Kim, 2014 .

Fabrication of Highly Sensitive Capacitive Pressure Sensors Using a Bubble-Popping PDMS

Jeongdai Jo, Kyoohee Woo, Inyoung Kim, 2023, Polymers.

Design and fabrication of printed electrowetting-on-dielectric device

Inyoung Kim, Taik-Min Lee, Bongmin Kim, 2015, International Journal of Precision Engineering and Manufacturing.

Effect of ink cohesive force on gravure offset printing

Kwang-Seop Kim, Jeongdai Jo, Inyoung Kim, 2012 .

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes.

F. Krebs, Jeongdai Jo, R. Søndergaard, 2012, Nanoscale.

Reverse offset printing of transparent metal mesh electrodes using an imprinted disposable cliché

Jeongdai Jo, Young-Man Choi, Chung-Mo Yang, 2015 .

Reverse offset printing of transparent metal mesh electrodes using an imprinted disposable cliché

Jeongdai Jo, Inyoung Kim, Taik-Min Lee, 2015, International Journal of Precision Engineering and Manufacturing.

Formulation and Characterization of CuIn1-xGaxSe2 Ink for Gravure Offset Printing

Inyoung Kim, Taik-Min Lee, Y. Jang, 2013 .