Seung-Hyun Lee

发表

The effect of shear force on ink transfer in gravure offset printing

Dong-Soo Kim, Sang-ki Chun, Taik-Min Lee, 2010 .

A photonic sintering derived Ag flake/nanoparticle-based highly sensitive stretchable strain sensor for human motion monitoring.

Jeongdai Jo, Sin Kwon, Jooho Moon, 2018, Nanoscale.

Uniform Pressing Mechanism in Large-Area Roll-to-Roll Nanoimprint Lithography Process

Ga Eul Kim, Moon-gu Lee, Kyoohee Woo, 2021, Applied Sciences.

Enhancement of printing overlay accuracy by reducing the effects of mark deformations

Young-Man Choi, Taik-Min Lee, Seung-Hyun Lee, 2017 .

Printing Speed and Quality Enhancement by Controlling the Surface Energy of Cliché in Reverse Offset Printing

Taik-Min Lee, Seung-Hyun Lee, Kwon Sin, 2017 .

Electrical wire explosion process of copper/silver hybrid nano-particle ink and its sintering via flash white light to achieve high electrical conductivity

Yeon-Taek Hwang, Hak-Sung Kim, Seung-Hyun Lee, 2016, Nanotechnology.

Effect of Properties of Conductive Ink on Printability of Electrode Patterning by Gravure Printing Method

C. Kim, Dong-Soo Kim, Seung-Hyun Lee, 2013 .

Force uniformity control for large-area roll-to-roll process.

Ga Eul Kim, Seung-Hyun Lee, Sin Kwon, 2021, The Review of scientific instruments.

Fabrication of Highly Sensitive Piezocapacitive Pressure Sensors using a Simple and Inexpensive Home Milk Frother

Jeongdai Jo, Kyoohee Woo, Seung-Hyun Lee, 2019, Physical Review Applied.

High-Precision Slot-Die Coating Machine for Thin Films of Flexible Display

Jeongdai Jo, Seung-Hyun Lee, Young-Man Choi, 2014 .

Distortion mechanism of patterning positions in the soft roller printing process for realizing large-area overlay printing

Seung-Hyun Lee, Kang Dong Woo, Hyunchang Kim, 2020, Journal of Micromechanics and Microengineering.

Fabrication of Nano-Micro Hybrid Structures by Replication and Surface Treatment of Nanowires

Ji Hoon Kim, Seon-Kyong Kim, Seung-Hyun Lee, 2017 .

Development of a precision reverse offset printing system.

Dongwoo Kang, Jeongdai Jo, Young-Man Choi, 2016, The Review of scientific instruments.

Empirical design of slot-die having shallow reservoir for thin-film printed electronics.

Dongho Oh, Inyoung Kim, Taik-Min Lee, 2018, The Review of scientific instruments.

2D all-solid state fabric supercapacitor fabricated via an all solution process for use in smart textiles

Jeongdai Jo, Kyoohee Woo, Seung-Hyun Lee, 2017 .

Mechanical and environmental durability of roll-to-roll printed silver nanoparticle film using a rapid laser annealing process for flexible electronics

Seung-Hyun Lee, Min Yang, Seung Hwan Ko, 2014, Microelectron. Reliab..

In situ monitoring of a flash light sintering process using silver nano-ink for producing flexible electronics

Hyun-Jun Hwang, Hak-Sung Kim, Seung-Hyun Lee, 2013, Nanotechnology.

High-Precision Printing Force Control System for Roll-to-Roll Manufacturing

Sungsoo Lim, Dongwoo Kang, Young-Man Choi, 2017, IEEE/ASME Transactions on Mechatronics.

Control of thermal deformation with photonic sintering of ultrathin nanowire transparent electrodes.

Sin Kwon, Hongseok Youn, Kyoohee Woo, 2020, Nanoscale.

Design of roll-to-roll printing equipment with multiple printing methods for multi-layer printing.

Jeongdai Jo, Seung-Hyun Lee, Chung Hwan Kim, 2012, The Review of scientific instruments.

Fabrication of Highly Sensitive Capacitive Pressure Sensors Using a Bubble-Popping PDMS

Jeongdai Jo, Kyoohee Woo, Inyoung Kim, 2023, Polymers.

Multi-Geometry Parameters Optimization of Large-Area Roll-to-Roll Nanoimprint Module Using Grey Relational Analysis and Artificial Neural Network

Kyungmin Kim, Jeongdai Jo, Taik-Min Lee, 2023, Polymers.

Register control of roll-to-roll gravure-offset printing equipment considering time difference between measurement and actuation

Seung-Hyun Lee, Chung Hwan Kim, Ha-Il You, 2012 .