J. Tao

发表

A large-volume manufacturing of multi-crystalline silicon solar cells with 18.8% efficiency incorporating practical advanced technologies

Yifeng Chen, J. Chu, Z. Xiong, 2016 .

Long-term reliability of silicon wafer-based traditional backsheet modules and double glass modules

Yifeng Chen, Hui Shen, J. Chu, 2015 .

The role of tuning Se/(S + Se) ratio in the improvement of Cu2MnSn(S, Se)4 thin films properties and photovoltaic device performance

Lin Sun, J. Chu, Pingxiong Yang, 2019, Solar Energy.

Investigation of electronic transport mechanisms in Sb2Se3 thin-film solar cells

J. Chu, Ziqiang Zhu, Shaoqiang Chen, 2019, Solar Energy Materials and Solar Cells.

Balancing the atomic waistline: Isodensity‐based scrf radii for main‐group elements and transition metals

J. Tao, G. Chass, D. Fang, 2013 .

Influence of rare-earth elements doping on structure and optical properties of BiFeO3 thin films fabricated by pulsed laser deposition

J. Chu, Pingxiong Yang, J. Tao, 2014 .

Structural and photoluminescent properties of ZnO films deposited by radio frequency reactive sputtering

Song Yin, J. Tao, Jin Yun-Fan, 2007 .

Grain growth enhancing through preheating treatment of a sputtered stacked metallic precursor for Cu(In, Al)Se2 thin film solar cells application

J. Chu, Pingxiong Yang, J. Tao, 2019, Materials Science and Engineering: B.

Antimony-induced grain growth and properties modification of Cu(In, Al)Se2 thin films fabricated by selenization of sputtered stacked precursors

J. Chu, Pingxiong Yang, J. Tao, 2016 .

Microstructural and morphological properties of sputtered Cu(In, Al)Se2 thin films for solar cell applications

J. Chu, Pingxiong Yang, J. Tao, 2015 .

Investigation of microstructural and optical properties of Cu(In, Al)Se2 thin films with various copper content

Lin Sun, J. Chu, Pingxiong Yang, 2015 .

RF magnetron sputtering processed transparent conductive aluminum doped ZnO thin films with excellent optical and electrical properties

J. Chu, Shaoqiang Chen, Pingxiong Yang, 2021, Journal of Materials Science: Materials in Electronics.

RF magnetron sputtering processed transparent conductive aluminum doped ZnO thin films with excellent optical and electrical properties

J. Chu, Shaoqiang Chen, Pingxiong Yang, 2021, Journal of Materials Science: Materials in Electronics.

An 8.7% efficiency co-electrodeposited Cu2ZnSnS4 photovoltaic device fabricated via a pressurized post-sulfurization process

J. Chu, J. Tao, Chuanjun Zhang, 2018 .

Synthesis and characterization of earth-abundant Cu2MnSnS4 thin films using a non-toxic solution-based technique

J. Chu, Pingxiong Yang, J. Tao, 2015 .

Composition control in Cu2ZnSnS4 thin films by a sol–gel technique without sulfurization

J. Chu, Pingxiong Yang, J. Tao, 2014, Journal of Materials Science: Materials in Electronics.

Efficient and Hole-Transporting-Layer-Free CsPbI2 Br Planar Heterojunction Perovskite Solar Cells through Rubidium Passivation.

J. Chu, Zhigao Hu, J. Tao, 2019, ChemSusChem.

Enhancing photovoltaic performance of carbon-based planar Cs3Sb2I9-xClx solar cells by using P3HT as hole transport material

J. Tao, Jinchun Jiang, J. Chu, 2021, Journal of Alloys and Compounds.

5.91%-efficient Sb2Se3 solar cells with a radio-frequency magnetron-sputtered CdS buffer layer

J. Chu, Ziqiang Zhu, Shaoqiang Chen, 2019, Applied Materials Today.

Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells

Jiang Tang, J. Chu, Zhuangchun Wu, 2019, Nano Energy.

Study of defects in Sb2Se3 solar cells via admittance spectroscopy

J. Chu, Shaoqiang Chen, J. Tao, 2018 .

A sputtered CdS buffer layer for co-electrodeposited Cu2ZnSnS4 solar cells with 6.6% efficiency.

J. Chu, Pingxiong Yang, J. Tao, 2015, Chemical communications.

Cation substitution induced structural transition, band gap engineering and grain growth of Cu2CdxZn1−xSnS4 thin films

J. Chu, Pingxiong Yang, J. Tao, 2017 .

Fabricating over 7%-efficient Sb2(S,Se)3 thin-film solar cells by vapor transport deposition using Sb2Se3 and Sb2S3 mixed powders as the evaporation source

H. Akiyama, Ziqiang Zhu, Shaoqiang Chen, 2021 .

Strategic improvement of Cu2MnSnS4 films by two distinct post-annealing processes for constructing thin film solar cells

Lin Sun, J. Chu, Pingxiong Yang, 2016 .

Co-electrodeposition of Cu3BiS3 thin films in weakly alkaline aqueous solutions for photovoltaic application

Pingxiong Yang, J. Tao, H. Deng, 2021, Journal of Materials Science: Materials in Electronics.

Effect of potassium doping for ultrasonic sprayed Cu2SnS3 thin films for solar cell application

C. Chen, J. Tao, Chengzhi Ruan, 2018, Journal of Materials Science: Materials in Electronics.

Microstructural and morphological properties of spin-coated Cu2MnSn(S,Se)4 thin films for solar cell applications

J. Chu, Pingxiong Yang, J. Tao, 2017 .

Influence of annealing temperature on structural and optical properties of Cu2MnSnS4 thin films fabricated by sol–gel technique

J. Chu, Pingxiong Yang, J. Tao, 2015 .

Composition dependence of the structure and optical properties of Cu2MnxZn1−xSnS4 thin films

J. Chu, Pingxiong Yang, J. Tao, 2015 .

Structurally tailored Cu(InxGa1 − x) Se2 thin films via RF magnetron sputtering

Xifei Li, Dejun Li, Lei Dong, 2014 .

Improvement performance of two-step electrodepositing Cu 2 MnSnS 4 thin film solar cells by tuning Cu-Sn alloy layer deposition time

J. Chu, Pingxiong Yang, J. Tao, 2018, Materials Chemistry and Physics.

Effect of deposition potential on the properties of Cu2ZnSnS4 films for solar cell applications

J. Chu, Pingxiong Yang, J. Tao, 2014 .

Lasing operation in the CsPbBr3 perovskite micron hemisphere cavity grown by chemical vapor deposition

H. Akiyama, Shaoqiang Chen, J. Tao, 2020 .

Controllable vapor transport deposition of efficient Sb2(S,Se)3 solar cells via adjusting evaporation source area

Shaoqiang Chen, Pingxiong Yang, J. Tao, 2022, Journal of Alloys and Compounds.

Multi-source cation/anion doping towards efficient carbon-based CsPbIBr2 solar cells with superior open voltage up to 1.37 V

J. Chu, Zhigao Hu, J. Tao, 2021 .

Growth control and defect passivation toward efficient and low-temperature processed carbon based CsPbIBr2 solar cell

J. Chu, J. Tao, Jinchun Jiang, 2020 .

Efficient carbon-based planar CsPbBr3 perovskite solar cells with Li-doped amorphous Nb2O5 layer

J. Chu, Zhigao Hu, J. Tao, 2020 .

Investigation of CsPbBr3 films with controllable morphology and its influence on the photovoltaic properties for carbon-based planar perovskite solar cells

J. Chu, J. Tao, Jinchun Jiang, 2020, Applied Optics.

RF sputtered CdS films as independent or buffered electron transport layer for efficient planar perovskite solar cell

S. Zuo, F. Shi, J. Chu, 2018 .

Enhanced performance of carbon-based planar CsPbBr3 perovskite solar cells with room-temperature sputtered Nb2O5 electron transport layer

J. Chu, Zhigao Hu, J. Tao, 2019, Solar Energy.

Heating rate tuning in structure, morphology and electricity properties of Cu2FeSnS4 thin films prepared by sulfurization of metallic precursors

Lin Sun, J. Chu, Pingxiong Yang, 2016 .

Carbon-based 2D-layered Rb0.15Cs2.85Sb2ClxI9−x solar cells with superior open-voltage up to 0.88 V

S. Zuo, Zhigao Hu, J. Tao, 2021 .

Low temperature solution deposited niobium oxide films as efficient electron transport layer for planar perovskite solar cell

J. Chu, Shaoqiang Chen, J. Tao, 2018, Solar Energy Materials and Solar Cells.

Influence of CsPbBr3/TiO2 interfaces deposited with magnetron sputtering and spin-coating methods on the open voltage deficit and efficiency of all-inorganic CsPbBr3 planar solar cells

J. Chu, Zhigao Hu, J. Tao, 2021 .

CdxZn1-xS/Sb2Se3 thin film photocathode for efficient solar water splitting

J. Tao, Kang Wang, Lintao Li, 2021 .

Effect of the post-selenization time on the structural and optical properties of Cu2MnSn(S,Se)4 thin films synthesized by sol-gel technique

J. Chu, J. Tao, H. Deng, 2017 .

Importance of Interfacial Passivation in the High Efficiency of Sb2Se3 Thin-Film Solar Cells: Numerical Evidence

H. Akiyama, J. Chu, Ziqiang Zhu, 2020 .

Effects of substrate temperature on material and photovoltaic properties of magnetron-sputtered Sb2Se3 thin films.

Shaoqiang Chen, J. Tao, Xiaobo Hu, 2019, Applied optics.

Band gap modulation and improved magnetism of double perovskite Sr2KMoO6 (K = Fe, Co, Ni, Mn) doped BaTiO3 ceramics

J. Chu, J. Tao, H. Deng, 2021, Ceramics International.

Effects of sulfurization temperature on the structural and optical properties of Cu2CdSnS4 thin films prepared by direct liquid method

J. Chu, J. Tao, H. Deng, 2017 .

Synthesis of Cu2MnSnS4 thin film deposited on seeded fluorine doped tin oxide substrate via a green and low-cost electrodeposition method

J. Chu, J. Tao, H. Deng, 2017 .

PROGRESS IN Nb3Sn SRF CAVITIES AT CORNELL UNIVERSITY∗

J. Tao, M. Liepe, R. Porter, 2020 .

Effect of Li-doped TiO2 layer on the photoelectric performance of carbon-based CsPbIBr2 perovskite solar cell

J. Tao, Peizhi Yang, Jinchun Jiang, 2022, Journal of Alloys and Compounds.

Process Accumulated 8% Efficient Cu2ZnSnS4‐BiVO4 Tandem Cell for Solar Hydrogen Evolution with the Dynamic Balance of Solar Energy Storage and Conversion

W. Zhao, Lingzhi Zhao, F. Jiang, 2022, Advanced science.

Simplification through complexity: the role of Ni-complexes in catalysed diyne-cyclobutanone [4+2+2] cycloadditions, a comparative DFT study.

J. Tao, G. Chass, D. Fang, 2012, Physical chemistry chemical physics : PCCP.

Interaction of Co with Si and SiO2 during rapid thermal annealing

Wenhua Chen, J. Tao, Chia-Hao Hsu, 1991 .

Vapor Transport Deposition of Highly Efficient Sb2(S,Se)3 Solar Cells via Controllable Orientation Growth

Shaoqiang Chen, J. Tao, Xiaobo Hu, 2021, Advanced Functional Materials.

Effect of sulfurization temperature of solution-processed Cu2SnS3 absorber for low cost photovoltaic cells

J. Chu, J. Tao, H. Deng, 2018, Materials letters (General ed.).

7.1% efficient co-electroplated Cu2ZnSnS4 thin film solar cells with sputtered CdS buffer layers

Lin Sun, Junhao Chu, Pingxiong Yang, 2016 .

Impacts of Surface Morphology on Ion Desorption and Ionization in Desorption Ionization on Porous Silicon (DIOS) Mass Spectrometry

S. Retterer, Lin He, J. Tao, 2009 .

Interfacial engineering by applying double CdS structure electron transport layer for high-performance Sb2(S,Se)3 solar cells

Shaoqiang Chen, J. Tao, Xiaobo Hu, 2023, Ceramics International.

All‐Vacuum‐Processed Sb2(S,Se)3 Thin Film Photovoltaic Devices via Controllable Tuning Seed Orientation

Shaoqiang Chen, J. Tao, Xiaobo Hu, 2023, Advanced Functional Materials.

Effects of Copper Dopants on the Magnetic Property of Lightly Cu-Doped ZnO Nanocrystals

J. Tao, Xiwei Zhang, Zhi Wang, 2020, Nanomaterials.

E ﬀ ects of Copper Dopants on the Magnetic Property of Lightly Cu-Doped ZnO Nanocrystals

J. Tao, Xiwei Zhang, W. Zha, 2020 .

Synthesis and characterization of Cu2ZnSnS4 thin films by the sulfurization of co-electrodeposited Cu–Zn–Sn–S precursor layers for solar cell applications

J. Chu, J. Tao, Jun He, 2014 .

Influence of Se supply for selenization of Cu(In,Ga)Se2 precursors deposited by sputtering from a single quaternary target

Li-ping Zhu, J. Chu, J. Tao, 2014 .

Influence of different S/Se ratio on the properties of Cu2Sn(SxSe1-x)3 thin films fabricated by annealing stacked metal precursors

J. Chu, J. Tao, Jun He, 2015, Journal of Materials Science: Materials in Electronics.

Co-electrodeposited Cu2ZnSnS4 thin-film solar cells with over 7% efficiency fabricated via fine-tuning of the Zn content in absorber layers

Yingbin Zhang, J. Tao, Ling Huang, 2016 .

Superior single-mode lasing in a self-assembly CsPbX3 microcavity over an ultrawide pumping wavelength range

H. Akiyama, J. Chu, Ziqiang Zhu, 2020, Photonics Research.

Vapor Transport Deposition of Sb2(S,Se)3 Solar Cells with Continuously Tunable Band Gaps

Shaoqiang Chen, J. Tao, Xiaobo Hu, 2022, ACS Applied Energy Materials.

Improving the performance of Sb2S3 thin-film solar cells by optimization of VTD source-substrate proximity

H. Akiyama, Ziqiang Zhu, Shaoqiang Chen, 2021 .

Investigation of electrically-active defects in Sb2Se3 thin-film solar cells with up to 5.91% efficiency via admittance spectroscopy

J. Chu, Ziqiang Zhu, Shaoqiang Chen, 2018, Solar Energy Materials and Solar Cells.

The role of sulfurization temperature on the morphological, structural and optical properties of electroplated Cu2MnSnS4 absorbers for photovoltaics

J. Chu, J. Tao, H. Deng, 2018, Materials Letters.

Improving the efficiency of Sb2Se3 thin-film solar cells by post annealing treatment in vacuum condition

Zhigao Hu, Ziqiang Zhu, Shaoqiang Chen, 2018, Solar Energy Materials and Solar Cells.

Synthesis and characterization of Cu-based selenide photovoltaic materials: Cu2FeSnSe4 and Cu(In, Al)Se2

J. Chu, J. Tao, F. Yue, 2015 .

Ultrathin Passivation of P-type silicon Surface by Atomic Layer Deposited Gallium Oxide Thin Films

J. Tao, L. Q. Guo, J. Wen, 2017 .

Influence of deposition potential on Cu2ZnSnS4 thin–film solar cells co–electrodeposited on fluorine–doped tin oxide substrates

Zhimin Ma, J. Tao, Xiwei Zhang, 2017 .

Effects of bismuth-doping on the properties of Cu(In, Al)Se2 thin films prepared by selenization of sputtered stacked precursors

J. Chu, J. Tao, H. Deng, 2018 .

Effects of working pressure and power on photovoltaic and defect properties of magnetron sputtered Sb2Se3 thin-film solar cells.

J. Chu, Shaoqiang Chen, J. Tao, 2020, Applied optics.

High performance single-mode vertical cavity surface emitting lasers based on CsPbBr3 nanocrystals with simplified processing

H. Akiyama, J. Chu, Shaoqiang Chen, 2020 .

Optimisation of Sb2S3 thin-film solar cells via Sb2Se3 post-treatment

Shaoqiang Chen, J. Tao, Xiaobo Hu, 2023, Journal of Power Sources.

Lasing properties and carrier dynamics of CsPbBr3 perovskite nanocrystal vertical-cavity surface-emitting laser

Shaoqiang Chen, J. Tao, Xiaobo Hu, 2023, Nanophotonics.

Electron–Hole Plasma Lasing Dynamics in CsPbClmBr3-m Microplate Lasers

H. Akiyama, Ziqiang Zhu, Shaoqiang Chen, 2020, ACS Photonics.

Giant electroresistance in hafnia-based ferroelectric tunnel junctions via enhanced polarization

Zhaomeng Gao, J. Tao, Yiwei Wang, 2023, Device.

Effects of working pressure on the material and defect properties of Sb2S3 thin-film solar cells achieved by the VTD method.

Ziqiang Zhu, Shaoqiang Chen, J. Tao, 2022, Applied Optics.

UV Light-Induced Degradation of Industrial Silicon HJT Solar Cells: Degradation Mechanism and Recovery Strategies

J. Tao, Po-Chuan Yang, Shehroz Razzaq, 2023, Journal of Solar Energy Research Updates.

Cu content dependence of morphological, structural and optical properties for Cu2ZnGeS4 thin films synthesized by sulfurization of sputtered precursors

Junhao Chu, Pingxiong Yang, Ling Huang, 2015 .

A sputtered CdS buffer layer for co-electrodeposited Cu2ZnSnS4 solar cells with 6.6% efficiency.

J. Chu, J. Tao, Kezhi Zhang, 2015, Chemical communications.

Room-temperature ferromagnetism in (K0.5Na0.5)NbO3-xBaNi0.5Nb0.5O3-δ ferroelectric ceramics with narrow bandgap

J. Chu, J. Tao, Jin Hong, 2021, Ceramics International.

Emerging Trends in Electron Transport Layer Development for Stable and Efficient Perovskite Solar Cells.

Shaoqiang Chen, J. Tao, Xiaobo Hu, 2024, Small.