Yuping Ren

发表

Cu2ZnSnS4 thin films: Facile and cost-effective preparation by RF-magnetron sputtering and texture control

Jiansheng Wang, Song Li, Jiajia Cai, 2013 .

Interdiffusion and impurity diffusion behavior in polycrystalline Mg-Y binary system

Yuping Ren, G. Qin, Boshu Liu, 2021 .

Activating profuse pyramidal slips in magnesium alloys via raising strain rate to dynamic level

Zipeng Zhao, Yuping Ren, G. Qin, 2016 .

Effect of Cu/Zn on microstructure and mechanical properties of extruded Mg–Sn alloys

Zhengyuan Gao, Yuping Ren, G. Qin, 2016 .

Recent developments in rare-earth free wrought magnesium alloys having high strength: A review

Yuping Ren, G. Qin, Xiangying Meng, 2016 .

Grain refining mechanism of Al-containing Mg alloys with the addition of Mn–Al alloys

Song Li, Yuping Ren, G. Qin, 2010 .

The phase equilibria and thermal stability of the long-period stacking ordered phase in the Mg–Cu–Y system

Yuping Ren, G. Qin, Hong-Xiao Li, 2014 .

Achieving high strength in indirectly-extruded binary Mg–Ca alloy containing Guinier–Preston zones

Yuping Ren, G. Qin, Xiangying Meng, 2015 .

On the dynamic mechanical property and deformation mechanism of as-extruded Mg-Sn-Ca alloys under tension

Mingxing Zhang, Yuping Ren, G. Qin, 2016 .

Room temperature quasi-superplasticity behavior of backward extruded Zn–15Al alloys

Yuping Ren, G. Qin, Liqing Wang, 2016 .

Ni80Fe20 permalloy nanoparticles: Wet chemical preparation, size control and their dynamic permeability characteristics when composited with Fe micron particles

M. Yamaguchi, S. Okamoto, Yuping Ren, 2009 .

Capping Groups Induced Size and Shape Evolution of Magnetite Particles Under Hydrothermal Condition and their Magnetic Properties

C. Esling, Song Li, Yuping Ren, 2009 .

Experimental study of the miscibility gap and calculation of the spinodal curves of the Au–Pt system

B. Shen, Yuping Ren, G. Qin, 2009 .

Evidence of a novel intermetallic Mg7Ag3 phase in Mg–Ag binary alloy system

Yuping Ren, G. Qin, Hong-Xiao Li, 2018, Journal of Applied Crystallography.

Microstructure, Mechanical Properties and Corrosion Behavior of Extruded Mg–Zn–Ag Alloys with Single-Phase Structure

Song Li, Yuping Ren, G. Qin, 2018, Acta Metallurgica Sinica (English Letters).

Chemical synthesis of faceted α-Fe2O3 single-crystalline nanoparticles and their photocatalytic activity

Song Li, Yuping Ren, G. Qin, 2013, Journal of Materials Science.

Copper wires with seamless 1D nanostructures: Preparation and electrochemical sensing performance

Song Li, Yuping Ren, G. Qin, 2018 .

Self-adapted clustering of solute atoms into a confined two-dimensional prismatic platelet with an ellipse-like quasi-unit cell

Yuping Ren, G. Qin, Boshu Liu, 2018, IUCrJ.

Au composition dependent order-disorder transitions of Fe−Pt intermetallic compounds: experiments and thermodynamic analysis

Yuping Ren, G. Qin, Hong-Xiao Li, 2022, Acta Materialia.

Redetermination of the Fe–Pt phase diagram by using diffusion couple technique combined with key alloys

Yuping Ren, G. Qin, Hong-Xiao Li, 2022, International Journal of Materials Research.

Enzyme-free amperometric sensing of hydrogen peroxide and glucose at a hierarchical Cu2O modified electrode.

Song Li, Yuping Ren, G. Qin, 2011, Talanta.

Magnesium in Combinatorial With Valproic Acid Suppressed the Proliferation and Migration of Human Bladder Cancer Cells

Hang Shi, Yuping Ren, G. Qin, 2020, Frontiers in Oncology.

Fabrication, Microstructures, and Mechanical Properties of Zn-0.1Mg-1Mn (wt.%) Alloy Tube

Yuping Ren, G. Qin, Meiyuan Lv, 2022, Journal of Materials Engineering and Performance.

Electrodeposition of Sn-doped hollow α-Fe2O3 nanostructures for photoelectrochemical water splitting

Jiansheng Wang, Song Li, Jiajia Cai, 2013 .

Uniform surface modification of diatomaceous earth with amorphous manganese oxide and its adsorption characteristics for lead ions

Song Li, Yuping Ren, G. Qin, 2014 .

Enhanced photoelectrochemical activity for Cu and Ti doped hematite: The first principles calculations

Song Li, Yuping Ren, G. Qin, 2011 .

Structure and electrochemical properties of copper wires with seamless 1D nanostructures

Song Li, Yuping Ren, G. Qin, 2018, Data in brief.

Two-Dimensional Frank-Kasper Z Phase with One Unit-Cell Thickness.

Yuping Ren, G. Qin, H. Pan, 2020, Nano letters.

Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy

Changlin Yang, Yuping Ren, G. Qin, 2020 .

Modulation of Osteogenesis and Angiogenesis Activities Based on Ionic Release from Zn–Mg Alloys

Yuping Ren, G. Qin, Xiuzhi Zhang, 2022, Materials.

Twin Boundary Superstructures Assembled by Periodic Segregation of Solute Atoms.

Yuping Ren, G. Qin, Qiuyan Huang, 2021, Nano letters.

Co-existences of the two types of β′ precipitations in peak-aged Mg-Gd binary alloy

Yuping Ren, G. Qin, H. Pan, 2018 .

Ternary compounds and solid-state phase equilibria in Mg-rich side of Mg-Zn-Ca system at 300 °C

Yuping Ren, G. Qin, Hong-Xiao Li, 2011 .

Mechanical performance and biocompatibility assessment of Zn-0.05wt%Mg-(0.5, 1 wt%) Ag alloys.

Yuping Ren, G. Qin, Weiting Yu, 2020, Journal of Biomedical Materials Research. Part B - Applied biomaterials.

Role of Al addition in modifying microstructure and mechanical properties of Mg-1.0 wt% Ca based alloys

Changlin Yang, Yuping Ren, G. Qin, 2020 .

Shear-induced hexagonal close-packed to face-centered cubic phase transition in pure titanium processed by equal channel angular drawing

Yuping Ren, G. Qin, Hongbo Xie, 2019, Journal of Materials Science.

Thermodynamic assessment of Au−Pt system

Song Li, Yuping Ren, G. Qin, 2012 .

Isothermal section of Mg-rich corner in Mg–Zn–Al ternary system at 335 °C

Song Li, Yuping Ren, G. Qin, 2014 .

Phase equilibria of low-Ni side in Nb–Ni–Ti system at 1100 °C

Yuping Ren, Hong-Xiao Li, M. Jiang, 2017, Rare Metals.

Single-walled carbon nanotube-reinforced copper composite coatings prepared by electrodeposition under ultrasonic field

Yuping Ren, Yandong Wang, L. Zuo, 2008 .

Fabrication, Microstructures, and Mechanical Properties of Zn-0.1Mg-1Mn (wt.%) Alloy Tube

Yuping Ren, G. Qin, Meiyuan Lv, 2022, Journal of Materials Engineering and Performance.

Effect of solid solution treatment on in vitro degradation rate of as-extruded Mg-Zn-Ag alloys

Song Li, Yuping Ren, G. Qin, 2017 .

A new rare-earth-free Mg-Sn-Ca-Mn wrought alloy with ultra-high strength and good ductility

Yu-jie Liu, Yuping Ren, G. Qin, 2019, Materials Science and Engineering: A.

Characterization of precipitates in aged Mg-4 wt%Zn alloy

Yuping Ren, G. Qin, Boshu Liu, 2021 .

Achieving high strength above 400 MPa in conventionally extruded Mg-Ca-Zn ternary alloys

Yuping Ren, G. Qin, Man-ping Li, 2022, Science China Technological Sciences.

Phase equilibria of Mg-rich corner in Mg–Zn–Al ternary system at 300 °C

Song Li, Yuping Ren, G. Qin, 2012 .

The α-Mg solvus and isothermal section of Mg-rich corner in the Mg―Zn―Al ternary system at 320 °C

Yuping Ren, M. Jiang, H. Li, 2009 .

Indirectly extruded biodegradable Zn-0.05wt%Mg alloy with improved strength and ductility: In vitro and in vivo studies

Yuping Ren, G. Qin, E. Zhang, 2018, Journal of Materials Science & Technology.

Microstructure and mechanical properties of continuous casting and extrusion Zn–15 wt% Al alloys

Dongyan Liu, Yuping Ren, G. Qin, 2020 .

Experimental Confirmation of Ni5Al3 Phase in Ni-Al Binary System by Diffusion Couple Technique

Yuping Ren, G. Qin, C. Li, 2011 .

Re-recognition of the aging precipitation behavior in the Mg–Sm binary alloy

Changlin Yang, Yuping Ren, G. Qin, 2020 .

Re-determination of γ/(γ + α-Mg) phase boundary and experimental evidence of R intermetallic compound existing at lower temperatures in the Mg–Al binary system

Yuping Ren, G. Qin, X. Shu, 2012 .

Textural evolution and improved ductility in Zn-0.2Mg-0.8Mn (wt%) alloys at different extrusion temperatures

Yuping Ren, G. Qin, Hong-Xiao Li, 2021 .

Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength

Xiaolei Wu, Yunzhi Wang, Yuping Ren, 2018 .

Microstructures and tensile properties of as-extruded Mg-Sn binary alloys

Yuping Ren, G. Qin, W. Pei, 2010 .

Effect of cumulative strain on the microstructural and mechanical properties of Zn-0.02 wt%Mg alloy wires during room-temperature drawing process

Song Li, Yuping Ren, G. Qin, 2018 .

Abnormal effect of Mn addition on the mechanical properties of as-extruded Zn alloys

Yuping Ren, G. Qin, Hong-Xiao Li, 2017 .

Phases equilibrated with long-period stacking ordered phases in the Mg-rich corner of the Mg-Y-Zn system

Yuping Ren, R. Schmid-Fetzer, Changrong Li, 2021 .

The thermodynamic tailoring for Mg86Y8Zn6 alloy with sole long-period stacking ordered structures

Yuping Ren, R. Schmid-Fetzer, Changrong Li, 2021, Journal of Alloys and Compounds.

Microstructure, Mechanical Properties and Fracture Behavior of As-Extruded Zn–Mg Binary Alloys

Song Li, Yuping Ren, G. Qin, 2017, Acta Metallurgica Sinica (English Letters).

Experimental evidence of the Mg7(Zn, Ag)3 continuous solid solution in Mg-rich corner of Mg–Zn–Ag ternary system at 335 °C

Yuping Ren, G. Qin, Hong-Fei Zhao, 2019, Journal of Alloys and Compounds.

Microstructural evolution of equal channel angular drawn purity titanium at room temperature

Yuping Ren, G. Qin, Hong-Fei Zhao, 2019, Journal of Alloys and Compounds.

The maximum solubility of Y in α-Mg and composition ranges of Mg24Y5-x and Mg2Y1-x intermetallic phases in Mg-Y binary system

Yuping Ren, G. Qin, W. Pei, 2011 .

Enhancing mechanical properties of Mg–Sn alloys by combining addition of Ca and Zn

Zhengyuan Gao, Yuping Ren, G. Qin, 2015 .

Microstructures and bio-corrosion resistances of as-extruded Mg–Ca alloys with ultra-fine grain size

Yuping Ren, G. Qin, H. Pan, 2017, Rare Metals.

Ultra-fine grain size and exceptionally high strength in dilute Mg–Ca alloys achieved by conventional one-step extrusion

Changlin Yang, Yantao Yang, Yuping Ren, 2019, Materials Letters.

Partial phase relationships of Mg-Zn-Ce system at 350 °C

H. Ding, Yuping Ren, G. Qin, 2009 .

Effect of extrusion speed on microstructure and mechanical properties of the Mg-Ca binary alloy

Changlin Yang, Yuping Ren, G. Qin, 2020, Journal of Magnesium and Alloys.

Self-Assembly of Two Unit Cells into a Nanodomain Structure Containing Five-Fold Symmetry.

Song Li, Yuping Ren, G. Qin, 2018, The journal of physical chemistry letters.

Phase equilibria of low-Y side in Mg–Zn–Y system at 400 °C

Yuping Ren, G. Qin, Boshu Liu, 2018, Rare Metals.

Effects of Fe addition on the microstructures and mechanical properties of as-extruded Zn-0.2Mg alloys

Yuping Ren, G. Qin, M. Zhang, 2021, Journal of Alloys and Compounds.

Anomalous crystal structure of γ″ phase in the Mg-RE-Zn(Ag) series alloys: Causality clarified by ab initio study

Yuping Ren, G. Qin, Xiangying Meng, 2020 .

Enhanced age-hardening response of the Mg-Sm alloy via alloying with Cd

Yuping Ren, G. Qin, Hong-Xiao Li, 2020 .

Phase equilibria of the long-period stacking ordered phase in the Mg–Ni–Y system

Yuping Ren, G. Qin, M. Jiang, 2015 .

Isothermal section of MgZnZr ternary system at 345 C

Song Li, Yuping Ren, G. Qin, 2011 .

Isothermal sections of the Mg-rich corner in the Mg–Sn–Y ternary system at 300 and 400 °C

Yuping Ren, G. Qin, W. Pei, 2009 .

Isothermal section of the Mg-Al-Mn ternary system at 400 ◦ C

Yuping Ren, G. Qin, M. Jiang, 2009 .

Microstructure evolution of Zn–0.2Mg–0.8Mn(wt-%) alloys with different initial textures during room-temperature compression

P. Bai, Zhanyong Zhao, Yuping Ren, 2022 .

Effects of Bi and Ce addition on tensile properties and corrosion resistance of Zn-15Al alloys by continuous casting and extrusion

Dongyan Liu, Yuping Ren, Hongbo Xie, 2020 .

Two-stage Hall-Petch relationship in Cu with recrystallized structure

N. Tsuji, S. Gao, Z. Zhang, 2020 .

Polytypic omega/omega-like transformation in a refractory high-entropy alloy

Yuping Ren, G. Qin, H. Pan, 2022, Acta Materialia.

Variable precipitation behaviors of Laves phases in an ultralight Mg-Li-Zn alloy

Yuping Ren, G. Qin, H. Pan, 2021, Journal of Magnesium and Alloys.

Nonsymmetrical Segregation of Solutes in Periodic Misfit Dislocations Separated Tilt Grain Boundaries.

Yuansheng Yang, Yuping Ren, G. Qin, 2021, Nano letters.

Diffusional-displacive transformation mechanism for the β1 precipitate in a model Mg-rare-earth alloy

Yuping Ren, G. Qin, Hong-Xiao Li, 2021 .

Interphase Boundary Segregation into an Ordered Core–Shell Structure with a Shell Containing Two Unit Cells

Yuping Ren, G. Qin, Hong-Xiao Li, 2020 .

Nucleation and growth mechanisms of γ’’ phase with single-unit-cell height in Mg-RE-Zn(Ag) series alloys: a first-principles study

Lei Wang, Yuping Ren, G. Qin, 2021, Journal of Materials Science & Technology.

Microstructure and mechanical property of a novel heat-resistant Mg-Ca-Mn based alloy

Yuping Ren, G. Qin, H. Pan, 2022, Materials Characterization.

A synergistic combination of diatomaceous earth with Au nanoparticles as a periodically ordered, button-like substrate for SERS analysis of the chemical composition of eccrine sweat in latent fingerprints

J. Chen, Song Li, Yuping Ren, 2015 .

The (α1 + α2) miscibility gap of the Al―Zn―Cu system at 360 °C

Yuping Ren, G. Qin, W. Pei, 2009 .

Effect of Cu addition on the α1 + α2 miscibility gap of the Al-Zn system

H. Chen, Yuping Ren, S. Hao, 2004 .

Growth of textured iron oxyhydroxide nanorod arrays on glass substrate

Song Li, Yuping Ren, G. Qin, 2012 .

Inter-granular exchange coupling and magnetic anisotropy of Ta/Ru/Co-23 at%Pt perpendicular thin films with different Ru underlayer thicknesses

Jiansheng Wang, Song Li, Yuping Ren, 2016, Rare Metals.

Effect of Phosphor Addition on Intergranular Exchange Coupling of Co-Pt Thin Films

Song Li, Yuping Ren, G. Qin, 2011 .

Thermodynamic prediction of the composition of Fe-based amorphous alloys

Haifeng Zhang, Hong Li, Aiming Wang, 2007 .

One-step fabrication of sub-10-nm plasmonic nanogaps for reliable SERS sensing of microorganisms.

J. Chen, B. Das, Jiansheng Wang, 2013, Biosensors & bioelectronics.

Fabrication of Large-Area, High-Enhancement SERS Substrates with Tunable Interparticle Spacing and Application in Identifying Microorganisms at the Single Cell Level

Liang Zuo, Xianwei Hu, J. Chen, 2012 .

Photocatalytic Activity of Ce-Doped Hematite for Hydrogen Production

Song Li, Jiajia Cai, Yuping Ren, 2014 .

Sputtered amorphous Co–Pt–P thin films for soft underlayer of perpendicular magnetic recording

Yuping Ren, G. Qin, W. Pei, 2010 .

Activations of stacking faults in the calcium-containing magnesium alloys under compression

Yuping Ren, G. Qin, J. She, 2017 .

Formation of profuse dislocations in deformed calcium-containing magnesium alloys

Yuping Ren, G. Qin, H. Pan, 2016 .

Incoherent magnetization reversal in Co–Pt nanodots investigated by magnetic force microscopy

H. Hasegawa, Song Li, Yuping Ren, 2011 .

A novel analysis method for noise of perpendicular recording media

N. Honda, H. Saito, H. Muraoka, 2008 .

Finite element simulation of deformation behavior of pure aluminum during equal channel angular pressing

H. Ding, Yuping Ren, J. Wang, 2005 .

Thermal Oxidation Preparation of Doped Hematite Thin Films for Photoelectrochemical Water Splitting

Song Li, Jiajia Cai, Yuping Ren, 2014 .

Magnesium Alloys Strengthened by Nanosaucer Precipitates with Confined New Topologically Close-Packed Structure

Yuping Ren, G. Qin, Boshu Liu, 2018, Crystal Growth & Design.

New Structured Laves Phase in the Mg-In-Ca System with Nontranslational Symmetry and Two Unit Cells.

Yuping Ren, G. Qin, H. Pan, 2018, Physical review letters.

Phase relationship in the Mg-rich corner of the Mg-Zn-Gd ternary system at 400–475 °C

Yuping Ren, G. Qin, Baodan Liu, 2021, Journal of Alloys and Compounds.

Atomic-scale HAADF-STEM characterization of an age-hardenable Mg-Cd-Yb alloy

Yuping Ren, G. Qin, Boshu Liu, 2019, Journal of Alloys and Compounds.

Achieving high heat-resistant property in dilute Mg-0.2Ce wrought alloy by retarding recrystallization process

Yuping Ren, G. Qin, Zhenya Pan, 2023, Journal of Alloys and Compounds.

Maximizing precipitation hardening effect enables ultrahigh strength in a coarse-grained Mg-13Gd forging alloy

Yuping Ren, G. Qin, H. Pan, 2023, Journal of Magnesium and Alloys.

Achieving outstanding heat-resistant properties in Mg alloy via constructing stable solute-network

Yuping Ren, G. Qin, Zhenya Pan, 2022, Materials Research Letters.

Effect of Cu on the Spinodal Decomposition of AlZn Alloy with Symmetrical Composition

Yuping Ren, Hong-Xiao Li, S. Hao, 2009 .

Grain refinement and strength enhancement in Mg wrought alloys: A review

Yuping Ren, H. Pan, D. Xie, 2023, Journal of Magnesium and Alloys.

Deformation-induced structural multiplicity of tilt boundaries facilitating the formation of two-dimensional interfacial superstructures

Yuping Ren, Shanshan Li, Hongbo Xie, 2024, International Journal of Plasticity.

Improving mechanical properties of Mg-Sn alloys by co-addition of Li and Al

Yuping Ren, H. Pan, Chubin Yang, 2023, Progress in Natural Science: Materials International.

Enhanced Catalytic Activity of Pt Nanomaterials: From Monodisperse Nanoparticles to Self-Organized Nanoparticle-Linked Nanowires

Xiumei Ma, Yuping Ren, G. Qin, 2010 .