T. T. Larsen-Olsen

发表

The effect of mesomorphology upon the performance of nanoparticulate organic photovoltaic devices

F. Krebs, Xiaojing Zhou, W. Belcher, 2015 .

A solution process for inverted tandem solar cells

Kristian O. Sylvester-Hvid, F. Krebs, E. Bundgaard, 2011 .

Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules

Suren A. Gevorgyan, Mikkel Jørgensen, Markus Hösel, 2013 .

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes.

Mikkel Jørgensen, Jeongdai Jo, Markus Hösel, 2012, Nanoscale.

All polymer photovoltaics: From small inverted devices to large roll-to-roll coated and printed solar cells

F. Krebs, Yao Liu, K. Norrman, 2013 .

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

Suren A. Gevorgyan, Mikkel Jørgensen, Christoph J. Brabec, 2014 .

Roll-to-roll fabrication of polymer solar cells

Markus Hösel, Roar R. Søndergaard, Frederik C. Krebs, 2012 .

Probing individal subcells of fully printed and coated polymer tandem solar cells using multichromatic opto-electronic characterization methods

Mikkel Jørgensen, Frederik C. Krebs, Henrik Friis Dam, 2015 .

A round robin study of polymer solar cells and small modules across China

F. Krebs, Yongsheng Chen, Yongfang Li, 2013 .

The state of organic solar cells—A meta analysis

Mikkel Jørgensen, Roar R. Søndergaard, Frederik C. Krebs, 2013 .

Baselines for Lifetime of Organic Solar Cells

Michail J. Beliatis, F. Krebs, D. Fluhr, 2016 .

In situ X-ray scattering of perovskite solar cell active layers roll-to-roll coated on flexible substrates

F. Krebs, K. Norrman, H. Dam, 2016 .

Synthesis and characterization of new electron-withdrawing moiety thieno[2,3-c]pyrrole-4,6-dione-based molecules for small molecule solar cells

F. Krebs, Hongzheng Chen, E. Bundgaard, 2013 .

Generation of native polythiophene/PCBM composite nanoparticles via the combination of ultrasonic micronization of droplets and thermocleaving from aqueous dispersion

F. Krebs, D. Tanenbaum, Hongzheng Chen, 2011, Nanotechnology.

Roll‐to‐Roll Inkjet Printing and Photonic Sintering of Electrodes for ITO Free Polymer Solar Cell Modules and Facile Product Integration

Mikkel Jørgensen, Roar R. Søndergaard, Frederik C. Krebs, 2013 .

Incorporation of ester groups into low band-gap diketopyrrolopyrrole containing polymers for solar cell applications

F. Krebs, Hongzheng Chen, M. Shi, 2012 .

A Nanoparticle Approach towards Morphology Controlled Organic Photovoltaics (OPV)

F. Krebs, Hongzheng Chen, K. Norrman, 2012 .

Round‐Robin Studies as a Method for Testing and Validating High‐Efficiency ITO‐Free Polymer Solar Cells Based on Roll‐to‐Roll‐Coated Highly Conductive and Transparent Flexible Substrates

Christoph J. Brabec, Roar R. Søndergaard, Frederik C. Krebs, 2012 .

Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods.

Mikkel Jørgensen, Kion Norrman, Eva Bundgaard, 2011, ACS nano.

Roll-to-roll processed polymer tandem solar cells partially processed from water

F. Krebs, K. Norrman, E. Bundgaard, 2012 .

Synthesis and photovoltaic properties from inverted geometry cells and roll-to-roll coated large area cells from dithienopyrrole-based donor–acceptor polymers

F. Krebs, Hongzheng Chen, Mogens Hinge, 2013 .

Upscaling of Perovskite Solar Cells: Fully Ambient Roll Processing of Flexible Perovskite Solar Cells with Printed Back Electrodes

Frederik C. Krebs, Dechan Angmo, Jon Eggert Carlé, 2015 .

Tin‐ and Lead‐Based Perovskite Solar Cells under Scrutiny: An Environmental Perspective

Frederik C. Krebs, Antonio Urbina, Nieves Espinosa, 2015 .

Matrix Organization and Merit Factor Evaluation as a Method to Address the Challenge of Finding a Polymer Material for Roll Coated Polymer Solar Cells

F. Krebs, E. Bundgaard, M. Andersson, 2015 .

Roll-coating fabrication of flexible organic solar cells: comparison of fullerene and fullerene-free systems

F. Krebs, E. Bundgaard, Yuze Lin, 2016 .

An isoindigo containing donor–acceptor polymer: synthesis and photovoltaic properties of all-solution-processed ITO- and vacuum-free large area roll-coated single junction and tandem solar cells

F. Krebs, Mogens Hinge, E. Bundgaard, 2015 .

All‐Solution‐Processed, Ambient Method for ITO‐Free, Roll‐Coated Tandem Polymer Solar Cells using Solution‐Processed Metal Films

Jørgen Stubager, Frederik C. Krebs, Henrik Friis Dam, 2014 .

All printed transparent electrodes through an electrical switching mechanism: A convincing alternative to indium-tin-oxide, silver and vacuum

Mikkel Jørgensen, Kion Norrman, Roar R. Søndergaard, 2012 .

Simultaneous multilayer formation of the polymer solar cell stack using roll-to-roll double slot-die coating from water

Mikkel Jørgensen, Kion Norrman, Frederik C. Krebs, 2012 .

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes.

F. Krebs, Jeongdai Jo, R. Søndergaard, 2012, Nanoscale.

Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods.

F. Krebs, K. Norrman, E. Bundgaard, 2011, ACS nano.

Interfacial engineering of self-assembled monolayer modified semi-roll-to-roll planar heterojunction perovskite solar cells on flexible substrates

Frederik C. Krebs, Lijian Zuo, Tao Ye, 2015 .