B. Paul

发表

A Uniform Residence Time Flow Cell for the Microreactor-Assisted Solution Deposition of CdS on an FTO-Glass Substrate

Chih-hung Chang, B. Paul, C. Hires, 2012 .

Comparing the Economics of Metal Additive Manufacturing Processes for Micro-scale Plate Reactors in the Chemical Process Industry

B. Paul, G. Jovanovic, Sriram Manoharan, 2019, Procedia Manufacturing.

Comparison of two passive microvalve designs for microlamination architectures

Brian K. Paul, B. Paul, Tyson Terhaar, 2000 .

Effect of Layer Thickness and Orientation Angle on Surface Roughness in Laminated Object Manufacturing

Brian K. Paul, B. Paul, Vinay Voorakarnam, 2001 .

Transient-Liquid-Phase Bonding of H230 Ni-Based Alloy Using Ni-P Interlayer: Microstructure and Mechanical Properties

B. Paul, Ö. Doğan, C. Carney, 2017, Metallurgical and Materials Transactions A.

Investigation of CdS nanoparticles formation and deposition by the continuous flow microreactor

Chih-hung Chang, B. Paul, Yu-Wei Su, 2019, Applied Surface Science.

Synthesis of nickel nanoparticles by hydrazine reduction: mechanistic study and continuous flow synthesis

B. Paul, Ravi Eluri, 2012, Journal of Nanoparticle Research.

Metal Microchannel Lamination Using Surface Mount Adhesives for Low-Temperature Heat Exchangers

B. Paul, P. Paulraj, 2011 .

Synthesis and post-processing of nanomaterials using microreaction technology

Chih-Hung Chang, S. Atre, Chih-hung Chang, 2008 .

Continuous Microwave-Assisted Gas–Liquid Segmented Flow Reactor for Controlled Nucleation and Growth of Nanocrystals

Brian K. Paul, Gregory S. Herman, David M. Schut, 2014 .

Synthesis of colloidal PbSe nanoparticles using a microwave-assisted segmented flow reactor

Chih-hung Chang, B. Paul, Ki-Joong Kim, 2014 .

Electroplasticity effects in Haynes 230

B. Paul, P. McNeff, 2020 .

Metal Powder Recyclability in Binder Jet Additive Manufacturing

S. Pasebani, B. Paul, Saereh Mirzababaei, 2020, JOM.

Continuous synthesis of ceria nanoparticles using a micromixer

B. Paul, B. Palanisamy, 2011, 2011 11th IEEE International Conference on Nanotechnology.

Hybrid solar/natural gas power system

J. Mankins, Daryl R. Brown, W. Tegrotenhuis, 2013 .

APPLICATION OF CONTROLLED THERMAL EXPANSION IN MICROLAMINATION FOR THE ECONOMICAL PRODUCTION OF BULK MICROCHANNEL SYSTEMS

B. Paul, Christoph Pluess, 2007 .

Manufacturing Process Design of a Microchannel Solar Receiver using Electrically-Assisted Embossing

B. Paul, P. McNeff, 2020, Procedia Manufacturing.

Simulation and Experimental Study of Metal Organic Frameworks Used in Adsorption Cooling

W. Tegrotenhuis, B. McGrail, R. Motkuri, 2017 .

Strengthening of 304L Stainless Steel by Addition of Yttrium Oxide and Grain Refinement during Selective Laser Melting

S. Pasebani, Chih-hung Chang, B. Paul, 2019 .

Continuous Microreactor-Assisted Solution Deposition for Scalable Production of CdS Films

Chih-hung Chang, B. Paul, Yu-Wei Su, 2013 .

Dense CdS thin films on fluorine-doped tin oxide coated glass by high-rate microreactor-assisted solution deposition

Weiqi Wang, Chih-hung Chang, Seung-Yeol Han, 2013 .

An economic and environmental assessment model for microchannel device manufacturing: Part 1 - Methodology

Karl R. Haapala, B. Paul, Qi Gao, 2016 .

The Hermeticity of Compression Seals in Microchannel Hemodialyzers

D. K. Ward, B. Paul, 2014 .

Cost and Environmental Impact Assessment of Stainless Steel Microreactor Plates using Binder Jetting and Metal Injection Molding Processes

Karl R. Haapala, B. Paul, Kamyar Raoufi, 2020, Procedia Manufacturing.

Thermally Enhanced Edge Registration for Aligning Diffusion-Bonded Laminae☆

B. Paul, Joseph S. Thomas, 2003 .

Convergent synthesis of polyamide dendrimer using a continuous flow microreactor

Chih-hung Chang, B. Paul, V. Remcho, 2008 .

Microwave assisted greener synthesis of nickel nanoparticles using sodium hypophosphite

B. Paul, Ravi Eluri, 2012 .

AN ABSTRACT OF THE THESIS OF Patrick Scot McNeff for the degree of Master of Science in Industrial Engineering presented on February 24, 2016. Title: Force Prediction in the Compression Sealing of an Ultra-thin Elastoviscoplastic

B. Paul, G. Jovanovic, P. McNeff, 2016 .

Cadmium sulfide thin film deposition: A parametric study using microreactor-assisted chemical solution deposition

Chih-hung Chang, B. Paul, Yu-Wei Su, 2012 .

Transformation, reaction and organization of functional nanostructures using solution-based microreactor-assisted nanomaterial deposition for solar photovoltaics

Chih-hung Chang, Alvin Chang, Seung-Yeol Han, 2022, MRS Energy & Sustainability.

Selective laser melting of austenitic oxide dispersion strengthened steel: Processing, microstructural evolution and strengthening mechanisms

S. Pasebani, Chih-hung Chang, B. Paul, 2020 .

Continuous sonochemical synthesis of cadmium sulfide nanoplatelets using an azeotropic solvent

Chih-hung Chang, B. Paul, B. Palanisamy, 2015 .

Thermal stability of additively manufactured austenitic 304L ODS alloy

S. Pasebani, Anumat Sittiho, I. Charit, 2021 .

Improving the Energy Efficiency of Adsorption Chillers by Intensifying Thermal Management Systems in Sorbent Beds

B. Paul, Hailei Wang, Kijoon Lee, 2017 .

AN ABSTRACT OF THE THESIS OF Sairam V Pamulapati for the degree of Master of Science in Industrial Engineering

Sairam V. Pamulapati, B. Paul, 2012 .

A Scalable Solution Route to Porous Networks of Nanostructured Black Tungsten

S. Pasebani, Chih-hung Chang, B. Paul, 2021, Nanomaterials.

Cooling rate limitations in the diffusion bonding of microchannel arrays

B. Paul, Gopi K. Lingam, 2012 .

High-rate synthesis of phosphine-stabilized undecagold nanoclusters using a multilayered micromixer

Hyung Dae Jin, Chih-hung Chang, B. Paul, 2010, Nanotechnology.

High Production Rate Synthesis of CdS Nanoparticles Using a Reverse Oscillatory Flow Method

B. Paul, D. A. Peterson, C. Padmavathi, 2014 .

Microreactor-Assisted Solution Deposition for Compound Semiconductor Thin Films

Brian K. Paul, Chang-Ho Choi, Chih-Hung Chang, 2014 .

Development and dispensing of a nickel nanoparticle ink for the diffusion brazing of a microchannel array

B. Paul, Ravi Eluri, 2013, Journal of Nanoparticle Research.

Microreactor-Assisted Nanomaterial Processing: Scaling by an Equal up and Equal down Approach

Chih-Hung Chang, Brian K. Paul, Chih-hung Chang, 2013 .

Understanding Limits on Fin Aspect Ratios in Counterflow Microchannel Arrays Produced by Diffusion Bonding

Brian K. Paul, Patrick Kwon, Ramkumar Subramanian, 2006 .

Bonding fixture tolerances for high-volume metal microlamination based on fin buckling and laminae misalignment behavior

Brian K. Paul, Wassanai Wattanutchariya, B. Paul, 2004 .

Microlamination for Microtechnology-Based Energy, Chemical, and Biological Systems

Brian K. Paul, Richard B. Peterson, R. Peterson, 1999, Advanced Energy Systems.

The synthesis of cadmium sulfide nanoplatelets using a novel continuous flow sonochemical reactor.

Brian Paul, Chih-Hung Chang, Chih-hung Chang, 2015, Ultrasonics sonochemistry.

Continuous precipitation of ceria nanoparticles from a continuous flow micromixer

M. Engelhard, Chih-hung Chang, B. Paul, 2013 .

Continuous Flow Synthesis of Ceria Nanoparticles Using Static T-mixers

B. Paul, B. Palanisamy, Brian K. Paul, 2012 .

A Nickel Aluminide Microchannel Array Heat Exchanger for High-Temperature Applications

B. Paul, K. Kanlayasiri, 2004 .

Feasibility of Using Diffusion Bonding for Producing Hybrid Printed Circuit Heat Exchangers for Nuclear Energy Applications

B. Paul, V. R. Saranam, 2018 .

Micro Energy and Chemical Systems (MECS) and Multiscale Fabrication

Brian K. Paul, B. Paul, 2006 .

Comparison of Nickel Nanoparticle-Assisted Diffusion Brazing of Stainless Steel to Conventional Diffusion Brazing and Bonding Processes

B. Paul, S. Tiwari, 2010 .

An Evaluation of Two Methods for Producing Intermetallic Microchannels

B. Paul, Rick D. Wilson, D. Alman, 2002 .

Fabrication of NiAl intermetallic reactors for microtechnology-based energy chemical systems (MECS)

B. Paul, Rick D. Wilson, D. Alman, 2001 .

Limits on aspect ratio in two-fluid microscale heat exchangers

B. Paul, Rick D. Wilson, H. Hasan, 2001 .

The Effect of Shape Variation in Microlamination on the Performance of High-Aspect-Ratio, Metal Microchannel Arrays

Brian K. Paul, Wassanai Wattanutchariya, Richard B. Peterson, 2000 .

ALUMINIDE MICROCHANNEL ARRAYS FOR HIGH-TEMPERATURE MICROREACTORS AND MICROSCALE HEAT EXCHANGERS

B. Paul, K. Kanlayasiri, 2003 .

Selective laser melting of 304L stainless steel: Role of volumetric energy density on the microstructure, texture and mechanical properties

S. Pasebani, Chih-hung Chang, B. Paul, 2020 .

Effect of Capacitor Discharge Welding on Single-Crystal Metals

B. Paul, Rick D. Wilson, Wiwat Thaneepakorn, 2000 .

A Multilayer Strategy for Improving the Abrasion Resistance of Silica Nanoparticle-Based Motheye Antireflective Coatings on Glass

Seung-Yeol Han, B. Paul, B. Palanisamy, 2016 .

Nanostructured ZnO as Biomimetic Anti-reflective Coatings on Textured Silicon Using a Continuous Solution Process

Chih-hung Chang, Seung-Yeol Han, B. Paul, 2012 .

AN ENVIRONMENTAL ANALYSIS OF NANOPARTICLE-ASSISTED DIFFUSION BRAZING

Karl R. Haapala, B. Paul, S. Tiwari, 2009 .

An analytical model of the diffusive scattering of low-energy electrons in electron-beam resists

B. Paul, 1999 .

The Impact of Fabrication Methods on the Mass Flux Characteristics of Contactor Membranes in AbsorptionlDesorptjon Cycle MicroScale Heat Pumps Abstract apped

B. Paul, 2011 .

Manufacturing Process Design of a Micro-Scale Liquid-Liquid Extractor and Multi-phase Separator

B. Paul, G. Jovanovic, Sriram Manoharan, 2020 .

Synthesis of a 316L Stainless Steel – Copper Composite by Laser Melting

S. Pasebani, Chih-hung Chang, B. Paul, 2022, Additive Manufacturing Letters.

Rapid prototyping and freeform fabrication

Brian K. Paul, Clayton O. Ruud, C. Ruud, 1997 .

Organic solvent nanofiltration for microfluidic purification of poly(amidoamine) dendrimers.

B. Paul, V. Remcho, Vincent T Remcho, 2007, Journal of chromatography. A.

Enhancement of pool-boiling heat transfer using nanostructured surfaces on aluminum and copper

Chih-hung Chang, B. Paul, T. Hendricks, 2010 .

Oxide dispersion strengthened 304 L stainless steel produced by ink jetting and laser powder bed fusion

S. Pasebani, Chih-hung Chang, B. Paul, 2020 .

Microstructure-property relationship in binder jet produced and vacuum sintered 316 L

S. Pasebani, B. Paul, Saereh Mirzababaei, 2022, Additive Manufacturing.

A Reverse Oscillatory Flow microreactor system for the synthesis of uniformly-size CdS nanoparticles

B. Paul, D. A. Peterson, P. Chandran, 2011, 2011 11th IEEE International Conference on Nanotechnology.

Development of an adhesive-bonded counterflow microchannel heat exchanger

Brian K. Paul, Richard B. Peterson, Prawin Paulraj, 2012 .

Teaching Manufacturing Processes from an Innovation Perspective

Laine Mears, Brian K. Paul, Albert Shih, 2021, Procedia Manufacturing.

Teaching Manufacturing Process Design as a Means for Competitive Advantage in Chemical Process Industries

Steven Summerville, Matthew Coblyn, Goran Jovanovic, 2020, Procedia Manufacturing.

Issues in fabricating manufacturing tooling using powder-based additive freeform fabrication

S. Baskaran, B. Paul, B. K. Paul, 1996 .

A Review on Progress, Challenges, and Prospects of Material Jetting of Copper and Tungsten

C. Okwudire, S. Pasebani, B. Paul, 2023, Nanomaterials.

Microstructural Analysis of Additively Manufactured 304L Stainless Steel Oxide Dispersion Strengthened Alloy

S. Pasebani, Chih-hung Chang, B. Paul, 2019, Microscopy and Microanalysis.

UV laser ablation of polyetherimide embossing tools for the packaging of membranes and microchannels using sealing bosses

B. Paul, Gi-Dae Kim, Jack T. Rundel, 2010 .

Self-Registration Methods for Increasing Membrane Utilization within Compression-Sealed Microchannel Hemodialysers.

Spencer D. Porter, B. Paul, 2014, Journal of manufacturing processes.

High pressure hermetic compression seals for embedding elastomeric membrane microvalves in polymer microfluidic devices

Brian K. Paul, Shiwoo Lee, Bindiya S. Abhinkar, 2011 .