Jujhar Singh

发表

Effect of ball-milling process parameters on mechanical properties of Al/Al2O3/collagen powder composite using statistical approach

S. Chattopadhyaya, A. Pramanik, S. Dwivedi, 2021, Journal of Materials Research and Technology.

STUDY OF SURFACE ROUGHNESS FOR DISCONTINUOUS ULTRASONIC VIBRATION ASSISTED ELECTRIC DISCHARGE MACHINING USING RSM

Jujhar Singh, 2013 .

A REVIEW OF RECENT METHODS FOR TOOL WEAR REDUCTION IN ELECTRICAL DISCHARGE MACHINING

Sanjeev Kumar, Shubham Sharma, Jujhar Singh, 2020 .

Trend and time series analysis by ARIMA model to predict the emissions and performance characteristics of biogas fueled compression ignition engine

S. K. Mahla, K. Parmar, S. S. Sandhu, 2019, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

FEM Modeling of Ultrasonic Vibration Assisted workpiece in EDM Process

R. S. Walia, P. Satsangi, V. Singh, 2011 .

An Investigation of Crack Structural Analysis and Its Propagation of a Taper Roller Bearing Under Different Misalignment Conditions

Manpreet Singh, Rajeev Kumar, Jujhar Singh, 2021 .

Mechanical, morphological, and fracture-deformation behavior of MWCNTs-reinforced (Al–Cu–Mg–T351) alloy cast nanocomposites fabricated by optimized mechanical milling and powder metallurgy techniques

R. A. Ilyas, Shubham Sharma, Jujhar Singh, 2021, Nanotechnology Reviews.

Computational Fluid Dynamics Analysis of Impingement Heat Transfer in an Inline Array of Multiple Jets

M. Sadeghzadeh, A. Issakhov, Shubham Sharma, 2021 .

Influence of Nickel-Based Cladding on the Hardness and Wear Behaviour of Hard-Faced Mild Steel Using E-7014 Electrode Using Shielded Metal Arc Welding

Shubham Sharma, Gursharan Singh, Jujhar Singh, 2020, Green Materials and Advanced Manufacturing Technology.

Fabrication and characterization of coir/carbon-fiber reinforced epoxy based hybrid composite for helmet shells and sports-good applications: influence of fiber surface modifications on the mechanical, thermal and morphological properties

Shubham Sharma, Jujhar Singh, Y. Singh, 2020 .

Effect of Intercritical Heat Treatment and Volume Fraction on the Morphological Properties, Mechanical Properties, and Work Hardening Behaviour of Dual-Phase Steel

H. Kumar, Sunpreet Singh, C. Prakash, 2020 .

Ecological aspects of cutting fluids applications in small scale industries of Northern India region

Gurpreet Singh, Jujhar Singh, Sehijpal Singh, 2021, Materials Today: Proceedings.

Utilization of rapid prototyping technology for the fabrication of an orthopedic shoe inserts for foot pain reprieve using thermo-softening viscoelastic polymers: A novel experimental approach

H. Kumar, K. V. Rao, Shubham Sharma, 2020 .

Neutrosophic Entropy-based ingenious measurement for Fast Fourier Transforms based classification of process-parameters and wear resistance of Friction-Stir processed hybrid AA7075- B4C Aluminium metal-matrix composites

G. Królczyk, Jujhar Singh, S. Wojciechowski, 2022, Journal of Materials Research and Technology.

Design and Analysis of a Low-Cost Electronically Controlled Mobile Ventilator, Incorporating Mechanized AMBU Bag, for Patients during COVID-19 Pandemic

S. Chattopadhyaya, Jujhar Singh, Madhulika Srivastava, 2022, Journal of healthcare engineering.

Experimental Investigation and Performance Optimization during Machining of Hastelloy C-276 Using Green Lubricants

Gurpreet Singh, Jujhar Singh, Sehijpal Singh, 2022, Materials.

Influence of rice husk ash , Cu , Mg on the mechanical behaviour of Aluminium Matrix hybrid composites

Shubham Sharma, Jujhar Singh, Vineet Kumar, 2019 .

Finite Element Analysis of a Leaf Spring using Radioss Linear: An alternate approach

Manpreet Singh, Jujhar Singh, Nitin Chauhan, 2020 .

Effect of nanoadditives on the novel leather fiber/recycled poly(ethylene-vinyl-acetate) polymer composites for multifunctional applications: Fabrication, characterizations, and multiobjective optimization using central composite design

Michal Petrů, Jujhar Singh, S. Rajkumar, 2022, Nanotechnology Reviews.

Effects of Elevated Temperature on the Residual Behavior of Concrete Containing Marble Dust and Foundry Sand

Jujhar Singh, C. Li, J. Chohan, 2022, Materials.

Performance of diesel engine having waste heat recovery system fixed on stainless steel made exhaust gas pipe

Ahmed J. Obaid, Gursharan Singh, Jujhar Singh, 2021, Materials Today: Proceedings.

Fabrication of aluminium carbon nano tube silicon carbide particles based hybrid nano-composite by spark plasma sintering

Harish Garg, H. Kumar, Sunpreet Singh, 2020 .

Current Concepts in Paediatric Femoral Shaft Fractures

Jujhar Singh, Siddhartha Sharma, R. John, 2017, The open orthopaedics journal.

Photoinduced Site-Selective Functionalization of Aliphatic C–H Bonds by Pyridine N-oxide Based HAT Catalysts

J. Pu, Jujhar Singh, Yongming Deng, 2022, ACS Catalysis.

Investigation on mechanical, tribological and microstructural properties of Al–Mg–Si–T6/SiC/muscovite-hybrid metal-matrix composites for high strength applications

S. Chattopadhyaya, Rupinder Singh, Shubham Sharma, 2021 .

Promising Role of Polylactic Acid as an Ingenious Biomaterial in Scaffolds, Drug Delivery, Tissue Engineering, and Medical Implants: Research Developments, and Prospective Applications

Sunpreet Singh, Lalit Ranakoti, B. Gangil, 2023, Molecules.

Micro-Hardness and Machined Surface Damage Study for Continuous and Discontinuous Ultrasonic Vibration Assisted Electrical Discharge Machining

R. S. Walia, Vikram Singh, P. Satsangi, 2011 .

Critical Review of Biodegradable and Bioactive Polymer Composites for Bone Tissue Engineering and Drug Delivery Applications

R. A. Ilyas, Shubham Sharma, Jujhar Singh, 2021, Polymers.

STANDARDIZATION OF GROWING SUBSTRATES AND NPK DOSES FOR GROWTH AND FLOWERING OF ALSTROEMERIA (Alstroemeria hybrida L.

Jujhar Singh, 2013 .

Fabrication of low elastic modulus Ti50Nb30HA20 alloy by rapid microwave sintering technique for biomedical applications

M. Mittal, H. Kumar, Sunpreet Singh, 2020 .

Progressive developments and challenges in dissimilar laser welding of steel to various other light alloys (Al/Ti/Mg): A comprehensive review

S. Chattopadhyaya, G. Królczyk, P. Ghosh, 2022, Heliyon.

Impact of post-heat-treatment on the surface-roughness, residual stresses, and micromorphology characteristics of plasma-sprayed pure hydroxyapatite and 7%-Aloxite reinforced hydroxyapatite coatings deposited on titanium alloy-based biomedical implants

M. Mittal, A. Khan, Sunpreet Singh, 2022, Journal of Materials Research and Technology.

Prediction of Transient Temperature Distributions for Laser Welding of Dissimilar Metals

A. Khan, S. Chattopadhyaya, P. Ghosh, 2021, Applied Sciences.

Study on the morphological and mechanical properties of TaC reinforced plasma spray coating deposited on titanium alloy

M. Mittal, Gursharan Singh, Jujhar Singh, 2022, Materials Today: Proceedings.

Effect of post coating processing on the morphological and mechanical properties of plasma Spray-reinforced hydroxyapatite coating

M. Mittal, Gursharan Singh, Jujhar Singh, 2022, Materials Today: Proceedings.

A Comparative Numerical Analysis on the Effect of Welding Consumables on the Ballistic Resistance of SMAW Joints of Armor Steel

S. Chattopadhyaya, Shubham Sharma, S. Dwivedi, 2021, Applied Sciences.

Process optimization and thermomechanical simulation of residual stresses and temperature distribution in the laser-beam penetration welds of 61Ni-21Cr-9Mo alloy and 99.3Fe-0.45Mn-0.2C steel joints

Shubham Sharma, Gursharan Singh, Jujhar Singh, 2020, THIRD INTERNATIONAL CONFERENCE ON INVENTIVE MATERIAL SCIENCE APPLICATIONS: ICIMA 2020.

Recent Trends and Developments in Conducting Polymer Nanocomposites for Multifunctional Applications

R. A. Ilyas, Shubham Sharma, Jujhar Singh, 2021, Polymers.

Effect of growing media and paclobutrazol on growth, flowering and pot presentability of geranium, Pelargonium x hortorum LH Bailey

Jujhar Singh, B. Dilta, B. Sharma, 2016 .

MANAGEMENT STRATEGIES IN A CASE OF POTT`S SPINE WITH DOWN SYNDROME- A RARE ENTITY

Jujhar Singh, Vishal Kumar, S. Dhatt, 2019, Journal of Evolution of Medical and Dental Sciences.

Clinical Outcome of Neer Type II Lateral End Clavicle Fractures With Coracoclavicular Ligament Disruption Treated With Pre-Contoured Locking Plate and Endobutton

Jujhar Singh, J. Prakash, Shailendra Khare, 2021, Cureus.

Fabrication of Novel Polymer Composites from Leather Waste Fibers and Recycled Poly(Ethylene-Vinyl-Acetate) for Value-Added Products

S. Siengchin, Jujhar Singh, P. Sudhakara, 2023, Sustainability.

Process parameter optimization in laser cutting of Coir fiber reinforced Epoxy composite - a review

Jujhar Singh, Yadvinder Singh, Shubham Sharma, 2021, Materials Today: Proceedings.

Multi-objective Optimization of Kerf-taper and Surface-roughness Quality Characteristics for Cutting-operation On Coir and Carbon Fibre Reinforced Epoxy Hybrid Polymeric Composites During CO2-Pulsed Laser-cutting Using RSM

Shubham Sharma, Jujhar Singh, C. Pruncu, 2021, Lasers in Manufacturing and Materials Processing.

Taguchi S/N and TOPSIS Based Optimization of Fused Deposition Modelling and Vapor Finishing Process for Manufacturing of ABS Plastic Parts

S. Chattopadhyaya, S. Singh, Shubham Sharma, 2020, Materials.

Mechanical Strength Enhancement of 3D Printed Acrylonitrile Butadiene Styrene Polymer Components Using Neural Network Optimization Algorithm

N. Mittal, S. Singh, Shubham Sharma, 2020, Polymers.

A comprehensive review of current developments on the waste-reinforced polymer-matrix composites for automotive, sports goods and construction applications: Materials, processes and properties

Shubham Sharma, Jujhar Singh, P. Sudhakara, 2020 .

An Innovative Agile Model of Smart Lean–Green Approach for Sustainability Enhancement in Industry 4.0

S. Chattopadhyaya, D. Pimenov, Jujhar Singh, 2021, Journal of Open Innovation: Technology, Market, and Complexity.

Impact of Growing Media and NPK on growth and Flowering of Alstroemeria cv. Capri

Capri, Jujhar Singh, Vinay Kumar, 2017 .

Performance investigations for sustainability assessment of Hastelloy C-276 under different machining environments

G. Królczyk, Jujhar Singh, Sehijpal Singh, 2023, Heliyon.

Optimization of performance, combustion and emission characteristics of acetylene aspirated diesel engine with oxygenated fuels: An Experimental approach

M. Ahmadi, A. Issakhov, Shubham Sharma, 2021 .

Analysis of Transient Thermal Temperature Distribution Over Service Life of Taper Roller Bearing Using FEA

R. Kumar, Manpreet Singh, Jujhar Singh, 2020, Lecture Notes in Mechanical Engineering.

Chemotherapy of Filariasis -On the Search of New Agents Effective on the Reproductive System of Female Adult Worms

Satyavan Sharma, A. Bhaduri, Jujhar Singh, 1990, Zeitschrift fur Naturforschung. C, Journal of biosciences.

Comparative Study on the Behavior of Reinforced Concrete Beam Retrofitted with CFRP Strengthening Techniques

Jujhar Singh, J. Chohan, Raman Kumar, 2022, Polymers.

Development of an agile model using total productive maintenance to enhance industrial sustainability in industry 4.0

Mandeep Singh, Gursharan Singh, Jujhar Singh, 2023, ADVANCEMENTS IN CIVIL ENGINEERING: COSMEC-2021.

Multiobjective Optimization of EDM Parameters for Rice Husk Ash/Cu/Mg-Reinforced Hybrid Al-0.7Fe-0.6Si-0.375Cr-0.25Zn Metal Matrix Nanocomposites for Engineering Applications: Fabrication and Morphological Analysis

Vineet Kumar, Jujhar Singh, S. Rajkumar, 2022, Journal of Nanomaterials.

PARAMETRIC OPTIMIZATION OF RICE HUSK ASH, COPPER, MAGNESIUM REINFORCED ALUMINIUM MATRIX HYBRID COMPOSITE PROCESSED BY EDM

Shubham Sharma, Jujhar Singh, Vineet Kumar, 2019 .

A Solar-Driven Wearable Multiplexed Bio-Sensing System For Noninvasive Healthcare Monitoring In Sweat

Jujhar Singh, Bianca Ning, Paul Lee, 2023, IEEE/LEOS International Conference on Optical MEMS.

Identification of localized defects and fault size estimation of taper roller bearing (NBC_30205) with signal processing using the Shannon entropy method in MATLAB for automobile industries applications

G. Królczyk, Jujhar Singh, S. Wojciechowski, 2022, Heliyon.

Effect of hybridization on physio-mechanical behavior of Vetiver and Jute fibers reinforced epoxy composites for structural applications: Studies on fabrication, physicomechanical, water-absorption, and morphological properties

R. A. Ilyas, S. Siengchin, S. Rangappa, 2022, Journal of Industrial Textiles.

Investigation of Properties of Mg and Al Based Nano Hybrid-Metallic Composites Processed Through Liquid Processing Technique

Shubham Sharma, Mandeep Singh, Jujhar Singh, 2019, Lecture Notes in Mechanical Engineering.

Development Method, Manufacturing Process of Fibre Reinforced Polymer Composite Type Helical Springs: A Review

Manpreet Singh, Rajeev Kumar, Jujhar Singh, 2021, Lecture Notes in Mechanical Engineering.

FEM Modeling of Ultra sonic Vibration Assisted work-piece in EDM Process

Jujhar Singh, R. S. Walia, Jujhar Singh, 2011 .

Optimizing of TIG welding parameters of Aluminium alloy (AL6061-T6)

Manpreet Singh, Jujhar Singh, Navjot Singh, 2017 .

Study of mode II interlaminar fracture toughness of laminated composites of glass and jute fibres in epoxy for structural applications

R. A. Ilyas, Shubham Sharma, Jujhar Singh, 2021, Functional Composites and Structures.

A State-of-the-Art Review on the Misalignment, Failure Modes and Its Detection Methods for Bearings

Manpreet Singh, Shubham Sharma, Jujhar Singh, 2022, MAPAN.

Vibration and Acoustic Method for Detection of Cracks in Bearings: A Critical Review

Manpreet Singh, Rajeev Kumar, Jujhar Singh, 2021 .

Investigation of copper reinforced Acrylonitrile Butadiene Styrene and Nylon 6 based thermoplastic polymer nanocomposite filaments for 3D printing of electronic components

R. A. Ilyas, S. Siengchin, S. Rangappa, 2022, High Performance Polymers.

Parametric optimization of MRR & TWR of the Al6061/SiC MMCs processed during die-sinking EDM using different electrodes

Hardeep Singh, Shubham Sharma, Jujhar Singh, 2021, Materials Today: Proceedings.

Power quality and transient analysis for a utility-tied interfaced distributed hybrid wind-hydro controls renewable energy generation system using generic and multiband power system stabilizers

Kamal Kant Sharma, Gagandeep Kaur, Jasgurpreet Singh Chohan, 2021 .

Numerical Analysis of Reliability and Availability of a Complex Repairable System

Munish Mehta, Manpreet Singh, Jujhar Singh, 2017 .

Investigation of geo-mining green roof seismic energy balancing with resin bolting by Universal Drilling Machine: a novel energy-absorbing-based support system

S. Chattopadhyaya, M. Assad, S. Dwivedi, 2022, Arabian Journal of Geosciences.

Optimization of Wire-EDM Process Parameters for Al-Mg-0.6Si-0.35Fe/15%RHA/5%Cu Hybrid Metal Matrix Composite Using TOPSIS: Processing and Characterizations

Sunpreet Singh, Shubham Sharma, Jujhar Singh, 2022, Journal of Manufacturing and Materials Processing.

Empirical Investigations during WEDM of Ni-27Cu-3.15Al-2Fe-1.5Mn Based Superalloy for High Temperature Corrosion Resistance Applications

C. Pruncu, Shubham Sharma, D. Pimenov, 2020, Materials.