D. Fu

发表

Bonding interfacial characterization of SiCp/8009Al composite and A356 aluminum alloy using compound casting

Haibin Liu, D. Fu, Zhao Dong, 2019, Journal of Materials Processing Technology.

Robust high-temperature potassium-ion batteries enabled by carboxyl functional group energy storage

Weiyou Yang, Qiao Liu, D. Fu, 2021, Proceedings of the National Academy of Sciences.

Effect of welding sequence on residual stress in thin-walled octagonal pipe−plate structure

Guan Wang, D. Fu, Luoxing Li, 2014 .

Unravelling the precipitation evolutions of AZ80 magnesium alloy during non-isothermal and isothermal processes

Longqing Tang, D. Fu, Hui Zhang, 2020 .

Effect of Zn content on the dynamic softening of Al–Zn–Mg–Cu alloys during hot compression deformation

Jinhai Wang, D. Fu, Hui Zhang, 2020 .

Characterization of dynamic microstructural evolution of AA7150 aluminum alloy at high strain rate during hot deformation

D. Fu, Hui Zhang, Fulin Jiang, 2016 .

In situ growth of aligned CsPbBr3 nanorods in polymer fibers with tailored aspect ratios

Jinju Zheng, Huaihao Zhang, Weiyou Yang, 2020 .

High-performance K-ion half/full batteries with superb rate capability and cycle stability

F. Gao, Weiyou Yang, Lan Jiang, 2022, Proceedings of the National Academy of Sciences of the United States of America.

Precursor engineering for high-quality Cs2AgBiBr6 films toward efficient lead-free double perovskite solar cells

Jinju Zheng, Weiyou Yang, M. Shang, 2021, Journal of Materials Chemistry C.

Microstructural characteristics and tribological behavior of an additively manufactured Ti-6Al-4V alloy under direct aging and solution-aging treatments

Chaolin Tan, D. Fu, Hui Zhang, 2022, Tribology International.

Revealing the decomposition mechanisms of dislocations and metastable α' phase and their effects on mechanical properties in a Ti-6Al-4V alloy

D. Fu, Hui Zhang, J. Teng, 2021, Journal of Materials Science & Technology.

Field emission behaviors of CsPbI3 nanobelts

Jinju Zheng, F. Gao, Weiyou Yang, 2020 .

One-dimensional WO3/BiVO4 heterojunction photoanodes for efficient photoelectrochemical water splitting

Huilin Hou, Weiyou Yang, Lin Wang, 2018, Chemical Engineering Journal.

MOF-5 as anodes for high-temperature potassium-ion batteries with ultrahigh stability

Weiyou Yang, Lan Jiang, Qiao Liu, 2022, Chemical Engineering Journal.

Effects of ambient gasses on the magnetic properties of Fe84.8Zr3.4Nb3.4B7.4Cu1 nanocrystalline alloy

Zhigao Huang, Shandong Li, Youwei Du, 2004 .

Carbon-based hole storage engineering toward ultralow onset potential and high photocurrent density of integrated SiC photoanodes

F. Gao, Weiyou Yang, D. Fu, 2022, Carbon.

Fabrication of homogeneously dispersed graphene/Al composites by solution mixing and powder metallurgy

D. Fu, Hui Zhang, J. Teng, 2018, International Journal of Minerals, Metallurgy, and Materials.

Phase transformation mechanisms, microstructural characteristics and mechanical performances of an additively manufactured Ti-6Al-4V alloy under dual-stage heat treatment

Jun Yu Li, Chaolin Tan, D. Fu, 2022, Materials & Design.

Hot compression and industrial extrusion characteristics of an as-cast Al-10Sr master alloy

D. Fu, Hui Zhang, J. Teng, 2021 .

Constitutive and microstructural characteristics of Ti-5Al-2.5Sn alloy during isothermal and non-isothermal multi-stage hot deformation across different phase regions

D. Fu, Hui Zhang, J. Teng, 2022, Journal of Alloys and Compounds.

Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region

J. Jonas, D. Fu, Hui Zhang, 2020 .

Strain path dependent evolutions of microstructure and texture in AZ80 magnesium alloy during hot deformation

Longqing Tang, D. Fu, Hui Zhang, 2019, Journal of Alloys and Compounds.

Comparative Hot Workability Characteristics of an Al–Si/SiCp Aluminium Matrix Composite Hybrid Reinforced with Various TiB2 Additions

D. Fu, Hui Zhang, J. Teng, 2020, Metals and Materials International.

Wear characteristics of hybrid aluminum-matrix composites reinforced with well-dispersed reduced graphene oxide nanosheets and silicon carbide particulates

D. Fu, Hui Zhang, J. Teng, 2018, Vacuum.

Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain

J. Jonas, D. Fu, Hui Zhang, 2020 .

Hot workability of PM 8009Al/Al 2 O 3 particle-reinforced composite characterized using processing maps

D. Fu, Hui Zhang, J. Teng, 2018 .

Revealing the grain size dependent hot workability and deformation mechanisms in a Mg-Zn-Y alloy

D. Fu, Hui Zhang, J. Teng, 2021, Journal of Magnesium and Alloys.

The role of various Zr additions in static softening behavior of Al-Zn-Mg-Cu alloys during interval holding of double-stage hot deformation

D. Fu, Hui Zhang, J. Teng, 2019, Journal of Alloys and Compounds.

Effects of niobium and heat treatment on microstructure and mechanical properties of low carbon cast steels

D. Fu, W. Gao, Y. Leng, 2016 .

Hot Workability of the Multi-Size SiC Particle-Reinforced 6013 Aluminum Matrix Composites

D. Fu, J. Teng, Fulin Jiang, 2023, Materials.

The intermetallic formation in the extruded AlSi20/8009 aluminum alloy during annealing treatment

Haibin Liu, D. Fu, Hui Zhang, 2019, Vacuum.

Unraveling precipitation evolution and strengthening function of the Al-Zn-Mg-Cu alloys with various Zn contents: multiple experiments and integrated internal-state-variable modeling

Chunhui Luo, D. Fu, Hui Zhang, 2022, Journal of Materials Science & Technology.

Microstructure and mechanical behaviors of 6061 Al matrix hybrid composites reinforced with SiC and stainless steel particles

D. Fu, Hui Zhang, J. Teng, 2021 .

Microstructure evolution and corrosion resistance improvement of Mg–Gd–Y–Zn–Zr alloys via surface hydrogen treatment

D. Fu, Hui Zhang, Luo-yi Wu, 2021 .

Effect of Heat Treatments on the Corrosion Resistance of a High Strength Mg-Gd-Y-Zn-Zr Alloy

D. Fu, Hui Zhang, Luo-yi Wu, 2022, Materials.

Microstructure, mechanical properties and deformation characteristics of Al-Mg-Si alloys processed by a continuous expansion extrusion approach

D. Fu, Hui Zhang, J. Teng, 2021, Journal of Materials Science & Technology.

Deformation mechanisms and microstructural characteristics of AZ61 magnesium alloys processed by a continuous expansion extrusion approach

D. Fu, Hui Zhang, J. Teng, 2022, Journal of Magnesium and Alloys.

Microstructure, mechanical properties and deformation mechanisms of an Al-Mg alloy processed by the cyclical continuous expanded extrusion and drawing approach

D. Fu, Hui Zhang, J. Teng, 2021, International Journal of Minerals, Metallurgy and Materials.

Fabrication of aluminium matrix hybrid composites reinforced with SiC microparticles and TiB2 nanoparticles by powder metallurgy

D. Fu, Hui Zhang, J. Teng, 2017 .

Tribological behaviour of Al-8.42Fe-1.29V-1.93Si/SiCp composites under dry sliding conditions

D. Fu, Shaoxiong Huang, Hui Zhang, 2019, IOP Conference Series: Materials Science and Engineering.

Static softening behavior and modeling of an Al–Cu–Mg–Zr alloy with various pre-precipitation microstructures during multistage hot deformation

D. Fu, Hui Zhang, Luo-yi Wu, 2020 .

Improvement of the mechanical properties of Al–Mg–Si alloys with nano-scale precipitates after repetitive continuous extrusion forming and T8 tempering

D. Fu, Hui Zhang, J. Teng, 2019, Journal of Materials Research and Technology.

Enhanced mechanical properties of an Al-Mg-Si alloy by repetitive continuous extrusion forming process and subsequent aging treatment

D. Fu, Hui Zhang, J. Teng, 2017 .

Effect of the silicon content and thermomechanical treatment on the dry sliding wear behavior of spray-deposited Al–Si/SiCp composites

D. Fu, Hongge Yan, Gang Chen, 2007 .

Tensile deformation behavior of spray-deposited FVS0812 heat-resistant aluminum alloy sheet at elevated temperatures

D. Fu, Hui Zhang, Qiqi Yan, 2007 .

Microstructural Evolution and Mechanical Properties of a Continuously Cast Al–Mg–Si–Cu Alloy Processed by Repetitive Continuous Extrusion Forming

D. Fu, Hui Zhang, J. Teng, 2022, Metals and Materials International.

Experimental and modeling investigations of the non-isothermal and isothermal precipitations in an Al-Cu-Mg-Zr alloy with various pre-precipitation microstructures

D. Fu, Hui Zhang, J. Teng, 2022, Materials & Design.

Effect of Zn content on the static softening behavior and kinetics of Al–Zn–Mg–Cu alloys during double-stage hot deformation

D. Fu, Hui Zhang, J. Teng, 2019, Journal of Alloys and Compounds.

Single-crystal Integrated Photoanodes Based on 4H-SiC Nanohole Arrays for Boosting Photoelectrochemical Water Splitting Activity.

F. Gao, Weiyou Yang, Lin Wang, 2020, ACS applied materials & interfaces.