I. Ohsawa

发表

Multiple damage assessment in composite laminates using a Doppler-effect-based fiber-optic sensor

Fucai Li, H. Murayama, K. Kageyama, 2009 .

Debonding detection using a self-calibration sensor network

Kazuro Kageyama, Isamu Ohsawa, Guang Meng, 2010 .

PURPOSE AND TARGET OF THE DEVELOPMENT OF CARBON FIBER REINFORCED THERMOPLASTICS

K. Kageyama, K. Uzawa, I. Ohsawa, 2007 .

L-shaped structures made from ultrathin chopped carbon fiber tape reinforced thermoplastics: delamination behavior and optimization

I. Ohsawa, J. Takahashi, Qitao Guo, 2019, Advanced Composite Materials.

DISTRIBUTED STRAIN SENSING FOR COMPOSITES

Hideak, I. Yamaguchi, T. Kasai, 2007 .

RESIN FLOW FRONT MONITORING FOR VARTM USING FIBER BRAGG GRATINGS

H. Murayama, K. Kageyama, K. Uzawa, 2007 .

Distributed Strain Sensing with Long Gauge FBG Sensors Based on Optical Frequency Domain Reflectometry

K. Kageyama, K. Uzawa, H. Igawa, 2006 .

Distributed Strain Measurement with High Spatial Resolution Using Fiber Bragg Gratings and Optical Frequency Domain Reflectometry

I. Yamaguchi, T. Kasai, H. Murayama, 2006 .

Structural health monitoring using fiber optic distributed sensors for vacuum-assisted resin transfer molding

Kazuro Kageyama, Isamu Ohsawa, Makoto Kanai, 2007 .

Characterization and elastic property modeling of discontinuous carbon fiber reinforced thermoplastics prepared by a carding and stretching system using treated carbon fibers

K. Shindo, Y. Wan, I. Ohsawa, 2019, Composites Part A: Applied Science and Manufacturing.

Mechanical properties of carbon fiber paper reinforced thermoplastics using mixed discontinuous recycled carbon fibers

Y. Wan, I. Ohsawa, J. Takahashi, 2018 .

Influence of small amount of glass fibers on mechanical properties of discontinuous recycled carbon fiber-reinforced thermoplastics

I. Ohsawa, J. Takahashi, Haowen Wei, 2018, Advanced Composite Materials.

INFLUE NCE OF MATERIAL FLOW I N COMPRESSION MOLDING ON MECHANICA L PROPERTIES OF DISCONTINUOUS CF / PP

K. Kageyama, K. Uzawa, I. Ohsawa, 2013 .

Mode I and Mode II Delamination Growth of Interlayer Toughened Carbon/Epoxy (T800H/3900-2) Composite System

M. Hojo, K. Kageyama, I. Ohsawa, 1995 .

FRACTURE BEHAVIOR OF CARBON FIBER REINFORCED POLYPROPYLENE UNDER ARTIFICIAL LIGHTNING STRIKE

I. Ohsawa, J. Takahashi, A. Morita, 2022 .

Effect of needle punching on flexural behavior of carbon fiber-reinforced thermoplastic sandwich panel with spring-backed core

Y. Wan, I. Ohsawa, J. Takahashi, 2019, Composites Part A: Applied Science and Manufacturing.

Tensile properties of recycled carbon fibers subjected to superheated steam treatment under various conditions

I. Ohsawa, S. Kitaoka, J. Takahashi, 2020 .

EFFECTS OF TEST CONDITIONS ON MODE II INTERLAMINAR FRACTURE TOUGHNESS OF FOUR-POINT ENF SPECIMENS

Toshio Suzuki, K. Kageyama, I. Ohsawa, 1999 .

Development of a Novel Vibration Sensor Using Optical Fiber and its Application to Composite Materials

H. Murayama, K. Kageyama, I. Ohsawa, 2004 .

DEVELOPMENT OF A NOVEL OPTICAL FIBER SENSOR FOR AE DETECTION IN COMPOSITES

K. Kageyama, I. Ohsawa, M. Kanai, 2022 .

Strain Measurement with Multi-Locational, Regional and Distributed Fiber-Optic Sensors

Toshio Suzuki, H. Murayama, K. Kageyama, 1997 .

Damage Tolerance Estimation of Advanced Composite Materials

Toshio Suzuki, K. Kageyama, I. Ohsawa, 1990 .

FAILURE ANALYSIS OF ULTRA-THIN CHOPPED CARBON FIBER TAPE REINFORCED THERMOPLASTIC IN DOUBLE-SHEAR TESTS

L. Meng, I. Ohsawa, J. Takahashi, 2017 .

Effect of Lamina Thickness on First Ply Failure in Multidirectionally Laminated Composites

K. Kageyama, N. Ogata, I. Ohsawa, 2004 .

Mode I and Mode II Fracture Toughness Measured Between Differently Oriented Plies in Graphite/Epoxy Composites

K. Kageyama, I. Ohsawa, I. Kimpara, 1995 .

Effects of curvature on strength and damage modes of L-shaped carbon fiber-reinforced polypropylene

Y. Wan, I. Ohsawa, J. Takahashi, 2014 .

Effect of plasma surface treatment of recycled carbon fiber on carbon fiber-reinforced plastics (CFRP) interfacial properties

Isamu Ohsawa, Jun Takahashi, I. Ohsawa, 2015 .

MECHANICAL PROPERTIES OF RECYCLED CFRP BY INJECTION MOLDING METHOD

Isamu Ohsawa, Kiyoshi Uzawa, Jun Takahashi, 2007 .

Influence of Water Absorption and Temperature on the Mechanical Properties of Discontinuous Carbon Fiber Reinforced Polyamide 6

I. Ohsawa, J. Takahashi, H. Piao, 2019, Fibers and Polymers.

Influence of water absorption on the mechanical properties of discontinuous carbon fiber reinforced polyamide 6

I. Ohsawa, J. Takahashi, S. Yamashita, 2019, Journal of Polymer Research.

Experimental and Numerical Investigation of Mode I and Mode II Interlaminar Behavior of Ultra-Thin Chopped Carbon Fiber Tape-Reinforced Thermoplastics

I. Ohsawa, J. Takahashi, Qitao Guo, 2020, Arabian Journal for Science and Engineering.

Effects of geometric parameters on the failure behavior of mechanically fastened chopped carbon fiber tape reinforced thermoplastics

L. Meng, I. Ohsawa, Y. Wan, 2019 .

Fracture mechanism characteristics of ultra-thin chopped carbon fiber tape-reinforced thermoplastics hat-shaped hollow beam under transverse static and impact loadings

I. Ohsawa, J. Takahashi, Qitao Guo, 2019, Carbon Letters.

Interfacial adhesion of recycled carbon fibers to polypropylene resin: Effect of superheated steam on the surface chemical state of carbon fiber

I. Ohsawa, S. Kitaoka, J. Takahashi, 2019, Composites Part A: Applied Science and Manufacturing.

Health condition evaluation of carbon fiber–reinforced thermoplastic with a tapping system

Y. Wan, I. Ohsawa, J. Takahashi, 2018 .

Influence of treatment with superheated steam on tensile properties of carbon fiber

I. Ohsawa, S. Kitaoka, J. Takahashi, 2018 .

Determination of transverse flexural and shear moduli of chopped carbon fiber tape-reinforced thermoplastic by vibration

Y. Wan, I. Ohsawa, J. Takahashi, 2018 .

Mechanical properties of recycled carbon fiber reinforced thermoplastics made by carbon fiber paper

I. Ohsawa, J. Takahashi, Haowen Wei, 2014 .

Recycling of market CFRP/CFRTP waste for mass production application

T. Akiyama, I. Ohsawa, K. Kawabe, 2013 .

ELASTIC MODULUS ESTIMATION OF CHOPPED CARBON FIBER TAPE REINFORCED THERMOPLASTICS USING THE MONTE CARLO SIMULATION

I. Ohsawa, J. Takahashi, T. Matsuo, 2022 .

Fractography of Fracture Surface of Unidirectional CFRP under Three Point Bending

I. Ohsawa, I. Kimpara, H. Kim, 1979 .

Mechanical Properties and Material Design of Glass/Aramid/Carbon Hybrid FRP Laminates. II. Mechanical Properties and Material Design of Glass/Aramid/Carbon Hybrid FRP Laminates-Fatigue Properties.

Toshio Suzuki, M. Nakada, K. Kageyama, 1995 .

Evaluation on Mechanical Properties of Carbon Fiber Reinforced Polypropylene

M. Tamura, K. Uzawa, I. Ohsawa, 2006 .

Acoustic emission monitoring of a reinforced concrete structure by applying new fiber-optic sensors

Kazuro Kageyama, Isamu Ohsawa, Makoto Kanai, 2005 .

Influence of Marine and Harsh Environments on Performance of Carbon Fiber Paper Reinforced Polyamide 6

I. Ohsawa, J. Takahashi, Xiangdong He, 2021, Fibers and Polymers.

Dynamic strain distribution measurement and crack detection of an adhesive-bonded single-lap joint under cyclic loading using embedded FBG

Kazuro Kageyama, Isamu Ohsawa, Makoto Kanai, 2014 .

NUMERICAL ANALYSIS AND OPTIMIZATION OF CFRTP HAT-STIFFENED STRUCTURE

I. Ohsawa, J. Takahashi, Qitao Guo, 2018 .

NUMERICAL AND EXPERIMENTAL STUDY OF THE MODE І INTERLAMINAR FAILURE OF CHOPPED CARBON FIBER TAPE

I. Ohsawa, Ye Zhang, J. Takahashi, 2017 .

Effect of Fiber Orientation on the Mode I Interlaminar Fracture Behavior of CF/EPOXY Laminates.

K. Kageyama, I. Ohsawa, I. Kimpara, 1992 .

Effect of Moisture Absorption on Mode I and Mode II Interlaminar Fracture Toughness of CFRP Laminates.

K. Kageyama, I. Ohsawa, I. Kimpara, 1993 .

Effect of Fiber Orientation on Mode I and Mode II Interlaminar Fracture Toughness of CFRP Laminates.

K. Kageyama, I. Ohsawa, I. Kimpara, 1993 .

EXPERIMENTAL AND THEORETICAL STUDY ABOUT ELECTRICAL AND THERMAL PROPERTIES OF CARBON FIBER MAT REINFORCED THERMOPLASTICS

I. Ohsawa, J. Takahashi, S. Yamashita, 2014 .