Dai Kato

发表

Multiphysics Simulation of Electrochemical Machining Process for Three-Dimensional Compressor Blade

Makoto Yamamoto, Toshiaki Fujisawa, Kazuaki Inaba, 2008 .

Research on noise reduction technology

Naoki Tsuchiya, Tsutomu Oishi, Hidekazu Kodama, 2005 .

An N-S Simulation of Stall Cell Behavior in a 2-D Compressor Rotor-Stator System at Various Loads

Eisuke Outa, Dai Kato, Kaoru Chiba, 1994 .

Unsteady Flow Effects in a High-Speed Multistage Axial Compressor

Naoki Tsuchiya, Hidekazu Kodama, Dai Kato, 2009 .

Modelling of Three-Phase Flow in Electro-Chemical Machining

Makoto Yamamoto, Ryo Tsuboi, Dai Kato, 2005 .

CFD Modeling Effects on Unsteady Multistage Simulation for a Transonic Axial Compressor

Naoki Tsuchiya, Hidekazu Kodama, Dai Kato, 2011 .

Learner Incentive in an e-Learning-based Training Course for the Information Technology Passport Examination

Dai Kato, Kazuki Kawamura, 2014 .

Driving characteristics consideration of interior permanent magnet synchronous motor in high speed range

Junnosuke Haruna, Nobukazu Hoshi, Dai Kato, 2012, Proceedings of The 7th International Power Electronics and Motion Control Conference.

Development of Simple and High-Performance Technology for Compressors

Dai Kato, Takaya Kato, Shinya Goto, 2008 .

Numerical Analysis of Flow in a Transonic Compressor With a Single Circumferential Casing Groove: Application to Two Different Compressor Rotors

Toshinori Watanabe, Dai Kato, Takehiro Himeno, 2014 .

TS-26 Double Oblique Shock Airfoil in High Speed Axial-Flow Compressors(Session B-1: Cascade Design 1)

Kenji Kobayashi, Dai Kato, Ikuhisa Mizuta, 1999 .

Development of Diffuser Passage Compressor Concept for Small Aircraft Engines

Hidekazu Kodama, Eisuke Outa, Dai Kato, 2007 .

Unsteady flow structure in an axial compressor at windmill condition

Takashi Goto, Eisuke Outa, Dai Kato, 2014 .

Effects of Air foil Clocking on Aero-per for mance and Unsteady Blade Loading in a High-Speed Axial Compressor

Dai Kato, Kuniyuki Imanari, 2003 .

The Influence of Shrouded Stator Cavity Flows on the Aerodynamic Performance of a High-Speed Multistage Axial-Flow Compressor

Naoki Tsuchiya, Hidekazu Kodama, Dai Kato, 2011 .

Numerical Investigation of Internal Flow Field for Diffuser Passage Compressor

Naoki Tsuchiya, Kazuomi Yamamoto, Hidekazu Kodama, 2008 .

Modeling of Multi-Phase Flow in Electro-Chemical Machining: One-Way Coupling Versus Two-Way Coupling

Makoto Yamamoto, Ryo Tsuboi, Kazuaki Inaba, 2007 .

Preface to the Special Issue on “Electronic Circuit Techniques and Related Topics”: ―― 特集号によせて ――

Dai Kato, 2018 .

A high linearity compact timing vernier for CMOS timing generator

Makoto Imamura, Dai Kato, Jun Kohno, 2010, 2010 IEEE International Test Conference.

B-12 Profile Improvement Eliminating Hub Side Stall Flow in a Forward Swept Subsonic Compressor Blade

Eisuke Outa, Dai Kato, Yutaka Ohta, 2007 .

Surface modification of thin polyion complex film for surface plasmon resonance immunosensor

Dai Kato, Ryoji Kurita, Soichi Yabuki, 2008 .

Improved detection limit for an electrochemical γ-aminobutyric acid sensor based on stable NADPH detection using an electron cyclotron resonance sputtered carbon film electrode

Dai Kato, Ryoji Kurita, Osamu Niwa, 2008 .

The design of polymer microcarrier surfaces for enhanced cell growth.

Dai Kato, Masahiko Takeuchi, Toshihiko Sakurai, 2003, Biomaterials.

Development of electrogenerated chemiluminescence-based enzyme linked immunosorbent assay for sub-pM detection.

Dai Kato, Ryoji Kurita, Osamu Niwa, 2010, Analytical chemistry.