B. Rabin

发表

FEM study of the effects of interlayers and creep in reducing residual stresses and strains in ceramic-metal joints

Richard L. Williamson, B. H. Rabin, R. Williamson, 1995 .

Functionally graded materials : design, processing and applications

A. Kawasaki, W. Kaysser, B. Rabin, 1999 .

Thermophysical properties of Alloy 617 from 25 °C to 1000 °C

R. N. Wright, B. Rabin, W. Swank, 2013 .

Residual Strains and Stresses in an Al2O3-Ni Joint Bonded with a Composite Interlayer: FEM Predictions and Experimental Measurements

Hugh Alan Bruck, D. Clarke, T. Watkins, 1997 .

Effects of thermal treatment on the co-rolled U-Mo fuel foils

B. Rabin, C. Breckenridge, T. Trowbridge, 2015 .

Residual Strains in an Al2O3‐Ni Joint Bonded with a Composite Interlayer: Experimental Measurements and FEM Analyses

Hugh A. Bruck, David R. Clarke, Hugh Alan Bruck, 2005 .

Fabrication of Graded Nickel–Alumina Composites with a Thermal-Behavior-Matching Process

Brian A. Corff, B. Rabin, I. Reimanis, 2004 .

Mapping of the residual stress distribution in a brazed zirconia-iron joint

S. David, C. Hubbard, Xun-li Wang, 1996 .

Mechanical properties of irradiated U Mo alloy fuel

W. R. Lloyd, B. Rabin, J. Schulthess, 2019, Journal of Nuclear Materials.

CONSOLIDATION OF Ni3AI POWDERS BY HOT ISOSTATIC PRESSING

R. N. Wright, B. Rabin, J. R. Knibloe, 1989 .

Recoil Implantation of Ito thin Films on Glass Substrates

B. Rabin, B. Harbison, S. Shatynski, 1983 .

TEM observations on the microstructure of an atomized high-purity aluminium powder

R. N. Wright, J. B. Adams, J. E. Flinn, 1989 .

Modified Tape Casting Method for Ceramic Joining: Application to Joining of Silicon Carbide

B. Rabin, 1990 .

Reaction processing of iron aluminides

R. N. Wright, B. Rabin, J. R. Knibloe, 1992 .

Synthesis of iron aluminides from elemental powders: Reaction mechanisms and densification behavior

R. N. Wright, B. Rabin, 1991 .

Characterization of Al2Ti precipitates in cubic Al64.5Ti27.5Cr8

R. N. Wright, B. Rabin, M. H. O'Brien, 1993 .

Fabrication of titanium carbide-alumina composites by combustion synthesis and subsequent dynamic consolidation

R. Williamson, B. Rabin, G. Korth, 1990 .

Combustion synthesis of cubic Al_3Ti alloys

R. N. Wright, B. Rabin, W. H. McFerran, 1992 .

Microstructure and tensile properties of Fe3Al produced by combustion synthesis/hot isostatic pressing

R. N. Wright, B. Rabin, 1992 .

Joining of Silicon Carbide/Silicon Carbide Composites and Dense Silicon Carbide Using Combustion Reactions in the Titanium–Carbon–Nickel System

B. Rabin, 1992 .

Joining of Silicon Carbide/Silicon Carbide Composites and Dense Silicon Carbide Using Combustion Reactions in the Titanium‐Carbon‐ Nickel System.

B. Rabin, 1992 .

Elevated temperature mechanical properties of reaction synthesized Fe3Al

R. N. Wright, B. Rabin, J. K. Wright, 1995 .

The Characterization of Properties

A. Kawasaki, W. Kaysser, B. Rabin, 1999 .

Reaction Processing and Properties of Sic-To-Sic Joints

B. Rabin, G. Moore, 1993 .

Functionally Gradient Materials

B. H. Rabin, I. Shiota, B. Rabin, 1995 .

Microstructure and Phase Stability of EB-PVD Alumina and Alumina/Zirconia for Thermal Barrier Coating Applications.

M. Peters, W. Kaysser, B. Rabin, 1997 .

Fundamentals of Residual Stresses in Joints Between Dissimilar Materials

Richard L. Williamson, B. H. Rabin, R. Williamson, 1995 .

Finite element analysis of thermal residual stresses at graded ceramic‐metal interfaces. Part I. Model description and geometrical effects

Richard L. Williamson, J. T. Drake, B. H. Rabin, 1993 .

Liquid-phase sintering of tungsten heavy alloys in vacuum

R. German, B. Rabin, A. Bose, 1986 .

Processing and Fabrication

W. A. Kaysser, Y. Miyamoto, B. H. Rabin, 1999 .

Evaluating microstructural and damage effects in rule-of-mixtures predictions of the mechanical properties of Ni-Al2O3 composites

Hugh A. Bruck, Hugh Alan Bruck, B. H. Rabin, 1999 .

Enhanced Sintering Through Second Phase Additions

R. German, B. Rabin, 1985 .

Microstructure Limitations of High Tungsten Content Heavy Alloys

R. German, B. Rabin, L. L. Bourguignon, 1985 .

Microstructure effects on tensile properties of tungsten-Nickel-Iron composites

R. German, B. Rabin, 1988 .

GRAIN GROWTH BEHAVIOR IN FE3AL ALLOYS FABRICATED BY DIFFERENT METHODS

R. N. Wright, B. Rabin, J. K. Wright, 1994 .

Process for synthesizing compounds from elemental powders

R. N. Wright, B. Rabin, 1990 .

Numerical simulation of dynamic consolidation of a SiC fiber-reinforced aluminum composite

R. N. Wright, R. Williamson, B. Rabin, 1989 .

Characterization of entrapped gases in rapidly solidified powders

B. Rabin, G. Korth, G. Smolik, 1990 .

Finite element analysis of thermal residual stresses at graded ceramic‐metal interfaces. Part II. Interface optimization for residual stress reduction

Richard L. Williamson, J. T. Drake, B. H. Rabin, 1993 .

Effects of irradiation on the interface between U-Mo and zirconium diffusion barrier

B. Rabin, D. Keiser, J. Jue, 2017 .

Microstructural anomalies in hot-isostatic pressed U–10 wt.% Mo fuel plates with Zr diffusion barrier

Y. Sohn, B. Rabin, D. Keiser, 2015 .

Growth kinetics and microstructural evolution during hot isostatic pressing of U-10 wt.% Mo monolithic fuel plate in AA6061 cladding with Zr diffusion barrier

Y. Sohn, B. Rabin, D. Keiser, 2014 .

Modeling and Design

W. A. Kaysser, Y. Miyamoto, B. H. Rabin, 1999 .

POWDER PROCESSING OF NI-AL2O3 FGM

B. Rabin, B H Rabin, R J Heaps, 1993 .

Evaluation of Rule‐of‐Mixtures Predictions of Thermal Expansion in Powder‐Processed Ni–Al2O3 Composites

Hugh A. Bruck, Hugh Alan Bruck, B. H. Rabin, 2004 .

Lessons from Nature

W. A. Kaysser, Y. Miyamoto, B. H. Rabin, 1999 .

CdTe–InSb heterojunctions

R. Bell, P. Siffert, B. Rabin, 1980 .

Optical Properties of Ion Implanted Indium Tin Oxide Glasses

B. Rabin, B. Harbison, S. Shatynski, 1984 .

Laser Shockwave Technique For Characterization Of Nuclear Fuel Plate Interfaces

J. A. Smith, J. Monchalin, M. Perton, 2013 .

Interface Characterization within a Nuclear Fuel Plate

B. Rabin, J. Smith, B. Benefiel, 2019, Applied Sciences.

Laser-based characterization of nuclear fuel plates

D. Cottle, B. Rabin, J. Smith, 2014 .

Characterization of Bond Strength of U-Mo Fuel Plates Using the Laser Shockwave Technique: Capabilities and Preliminary Results

J. A. Smith, D. Cottle, B. Rabin, 2013 .

Developing A Laser Shockwave Model For Characterizing Diffusion Bonded Interfaces

B. Rabin, J. Smith, J. Lacy, 2015 .

Effects of the Foil Flatness on Irradiation Performance of U10Mo Monolithic Mini-Plates

B. Rabin, P. Medvedev, H. Ozaltun, 2015 .

High energy X-ray diffraction measurement of residual stresses in a monolithic aluminum clad uranium–10 wt% molybdenum fuel plate assembly

B. Clausen, D. Brown, L. Balogh, 2013 .

Irradiation Performance: Research Reactor Fuels

B. Rabin, M. Meyer, J. Cole, 2021 .

Elevated temperature tensile tests on DU–10Mo rolled foils

B. Rabin, T. Trowbridge, E. Perez, 2018, Journal of Nuclear Materials.

Shutdown-induced tensile stress in monolithic miniplates as a possible cause of plate pillowing at very high burnup

Hakan Ozaltun, Adam B. Robinson, Barry H. Rabin, 2018 .

Joining of fiber-reinforced SiC composites by in situ reaction methods

B. Rabin, 1990 .

General Aspects of FGM Fabrication by Powder Stacking

Brian A. Corff, B. Rabin, Andrew N. Winter, 1999 .

Thermo-Mechanical Performance Assessment of Selected Plates From MP-1 Low Power Experiments

B. Rabin, H. Ozaltun, 2017, Volume 6B: Energy.

Post-Irradiation Non-Destructive Analyses of the AFIP-7 Experiment

Adam B. Robinson, Walter J. Williams, Barry H. Rabin, 2017 .

Irradiation Tests Supporting LEU Conversion of Very High Power Research Reactors in the US

B. Rabin, G. Housley, J. Cole, 2016 .