J. Sahari

发表

Effect of small-sized conductive filler on the properties of an epoxy composite for a bipolar plate in a PEMFC

A. Sulong, H. Suherman, J. Sahari, 2013 .

Water management in a single cell proton exchange membrane fuel cells with a serpentine flow field

Kamaruzzaman Sopian, Jaafar Sahari, Wan Ramli Wan Daud, 2009 .

Recent developments in materials for aluminum–air batteries: A review

W. Daud, M. Talib, W. Ramli, 2015 .

CRITICAL POWDER LOADING AND RHEOLOGICAL PROPERTIES OF POLYPROPYLENE/GRAPHITE COMPOSITE FEEDSTOCK FOR BIPOLAR PLATE APPLICATION

Iswandi, A. Sulong, T. Husaini, 2016 .

High power direct methanol fuel cell with a porous carbon nanofiber anode layer

Siti Kartom Kamarudin, Abu Bakar Mohamad, Jaafar Sahari, 2014 .

Optimisation of Sintering Factors of Titanium Foams Using Taguchi Method

K. R. Jamaludin, N. Muhamad, A. Muchtar, 2010 .

Effect of Molding Parameters on the Flexural Strength of Carbon Black/Graphite/Epoxy Nanocomposites Using Taguchi Method

Duskiardi, Irmayani, A. Sulong, 2016 .

The effect of milled carbon fibre filler on electrical conductivity in highly conductive polymer composites

A. Sulong, J. Sahari, Mohd Yusuf Zakaria, 2017 .

Effect of the compression molding parameters on the in-plane and through-plane conductivity of carbon nanotubes/graphite/epoxy nanocomposites as bipolar plate material for a polymer electrolyte membrane fuel cell

A. Sulong, H. Suherman, J. Sahari, 2013 .

THE EFFECTS OF THICKNESS REDUCTION AND PARTICLE SIZES ON THE PROPERTIES GRAPHITE - POLYPROPYLENE COMPOSITE

N. Muhamad, A. Muchtar, J. Sahari, 2011 .

Identifying Student-Focused Intervention Programmes through Discrimination Index

Dzuraidah Abd. Wahab, Nizaroyani Saibani, Juridah Johari, 2012 .

Electrical Conductivity and Hardness Property of CNTs/Epoxy Nanocomposites

A. Sulong, H. Suherman, J. Sahari, 2013 .

The Effect of Co/Pd MgO Supported Catalyst Calcination Temperature on the Yield and Morphology of CNTs via Methane Decomposition

G. Allaedini, J. Sahari, S. M. Tasirin, 2014 .

Electrical Conductivity and Flexural Strength of Graphite/Carbon Nanotubes/Epoxy Nanocomposites

A. Sulong, H. Suherman, J. Sahari, 2010 .

Effect of Loading Concentration on the Electrical and Hardness Properties of MWCNT/Epoxy Nanocomposites

A. Sulong, J. Sahari, R. Royan, 2011 .

Electrical conductivity behaviour of chemical functionalized MWCNTs epoxy nanocomposites

R. Ramli, B. Deros, N. Muhamad, 2009 .

MECHANICAL AND ELECTRICAL PROPERTIES OF FUNCTIONALIZED MULTI-WALLED CARBON NANOTUBES REINFORCED POLYETHYLENE COMPOSITE FABRICATED BY EXTRUSION SHEAR FLOW

N. Muhamad, A. Sulong, J. Sahari, 2009 .

Effect of Wet Oxidation on the Dispersion and Electrical Properties of Multi-Walled Carbon Nanotubes/Epoxy Nanocomposites

A. Sulong, H. Suherman, J. Sahari, 2011 .

Rheological and mechanical properties of carbon nanotube/Graphite/SS316L/polypropylene nanocomposite for a conductive polymer composite

N. Muhamad, A. Sulong, H. Suherman, 2013 .

Effect of Acid- and Ultraviolet/Ozonolysis-Treated MWCNTs on the Electrical and Mechanical Properties of Epoxy Nanocomposites as Bipolar Plate Applications

A. Sulong, H. Suherman, J. Sahari, 2013 .

Effect of Mixing Parameter on Electrical Conductivity of Carbon Black/Graphite/Epoxy Nanocomposite Using Taguchi Method

A. Sulong, H. Suherman, J. Sahari, 2013 .

A review of electrical conductivity models for conductive polymer composite

A. Sulong, J. Sahari, N. R. M. Radzuan, 2017 .

Fracture Properties Investigation of Artocarpus odoratissimus Composite with Polypropylene (PP)

J. Sahari, M. Shah, O. Wani, 2016 .

Tensile and Physical Properties of Linear Low Density Polyethylene-natural Rubber Composite: Comparison between Size and Filler Types

J. Sahari, Y. Arief, M. U. Wahit, 2016 .

Natural Rubber as Electrical Insulator: A Review

J. Sahari, M. Makmud, S. Junian, 2015 .

Akademia Baru Natural Rubber as Electrical Insulator : A Review

J. Sahari, M. Makmud, S. Junian, 2015 .

Investigation of MEA degradation in a passive direct methanol fuel cell under different modes of operation

Abu Bakar Mohamad, S. K. Kamarudin, Jaafar Sahari, 2014 .

Optimization of a porous carbon nanofiber layer for the membrane electrode assembly in DMFC

M. S. Masdar, S. Kamarudin, A. Mohamad, 2015 .

Effect of Corrossion on the Electrical Conductivity of Metals and Polymer Composite

F. K. Chin, J. Sahari, M. Sabri, 2012 .

Mechanical and Physical Properties of Injection Molded Halloysite Nanotubes-Thermoplastic Polyurethane Nanocomposites

J. Sahari, T. Gaaz, A. B. Sulong, 2015 .

Electrical properties of carbon-based polypropylene composites for bipolar plates in polymer electrolyte membrane fuel cell (PEMFC)

Jaafar Sahari, J. Sahari, Radwan Dweiri, 2007 .

Thermal–mechanical model of warm powder compaction process

A. Ariffin, N. Muhamad, J. Sahari, 2001 .

Simultaneous Optimization for Multiple Responses on the Compression Moulding Parameters of Composite Graphite – Polypropylene Using Taguchi Method

N. Muhamad, A. Muchtar, J. Sahari, 2011 .

Optimization of Electrical Conductivity for Composite Bipolar Plates in PEM Fuel Cell

J. Sahari, Radwan Dweiri, A. Mousa, 2010 .

Interlaminar fracture properties of fibre reinforced natural rubber/polypropylene composites

Rozli Zulkifli, C. Azhari, J. Sahari, 2002 .

Effect of the addition of milled carbon fiber as a secondary filler on the electrical conductivity of graphite/epoxy composites for electrical conductive material

Abu Bakar Sulong, Jaafar Sahari, H. Suherman, 2015 .

The Influence of Type of Race among Engineering Students towards the Level of Emotional Intelligence (EQ) Scores

B. Deros, D. A. Wahab, N. Muhamad, 2012 .

Effects of Different Particles Sizes of Graphite on the Engineering Properties of Graphites/Polypropylene Composites on Injection Molding Aplication

Iswandi, J. Sahari, A. B. Sulong, 2011 .

Comparison of emotional intelligence scores among engineering students of an academic programme

D. A. Wahab, N. Muhamad, Z. Harun, 2015 .

Level of Emotional Intelligence (EQ) Scores among Engineering Students during Course Enrollment and Course Completion

D. A. Wahab, N. Muhamad, J. Sahari, 2012 .

Electrical Properties of Carbon Nanotubes-Based Epoxy Nanocomposites for High Electrical Conductive Plate

H. Suherman, J. Sahari, A. B. Sulong, 2011 .

Analysis of Energy Absorption on Pultruded Composite Tube under Oblique Loading

H. Suherman, J. Sahari, A. B. Sulong, 2011 .

Microstructural image analysis and structure-electrical conductivity relationship of single- and multiple-filler conductive composites

J. Sahari, Radwan Dweiri, 2008 .

Computer simulation of electrical conductivity of graphite-based polypropylene composites based on digital image analysis

J. Sahari, Radwan Dweiri, 2007 .

Mathematical modelling of thermoplastic natural rubber melt flow in a double feed extrusion system

Jaafar Sahari, Che Husna Azhari, C. Azhari, 1998 .

Development and characterization of titanium alloy foams

K. R. Jamaludin, N. Muhamad, A. Muchtar, 2010 .

Influence Of Composition and Sintering Temperature on Density for Pure and Titanium Alloy Foams

K. R. Jamaludin, N. Muhamad, A. Muchtar, 2014 .

Taguchi Method for the Determination of Optimised Sintering Parameters of Titanium Alloy Foams

K. R. Jamaludin, N. Muhamad, A. Muchtar, 2011 .

Optimisation of Processing Parameters of Titanium Foams Using Taguchi Method for Compressive Strength

K. R. Jamaludin, N. Muhamad, A. Muchtar, 2010 .

Difficulty Index of Examinations and Their Relation to the Achievement of Programme Outcomes

M. Z. Omar, D. A. Wahab, S. Abdullah, 2011 .

Effect of molding temperature on properties of graphite/stannum/polypropylene composites

M. Daud, J. Sahari, M. Z. Selamat, 2016 .

Peculiarities of Injection Molding Conducting Composites

J. Sahari, Yovial Mahyoedin, A. Mukhtar, 2018 .