C. Yue

发表

Fabrication of large SU-8 mold with high aspect ratio microchannels by UV exposure dose reduction

Chee Yoon Yue, Mary B. Chan-Park, M. Chan-Park, 2004 .

Interfacial studies on surface modified Kevlar fibre/epoxy matrix composites

K. Padmanabhan, C. Yue, 1999 .

Effects of primer and annealing treatments on the shear strength between anodized Ti6Al4V and epoxy

Jinglei Yang, C. Yue, P. He, 2015 .

Influence of the Bonding Solvent on the Structure and Strength of Solvent Welded Joints

Chee Yoon Yue, C. Yue, 1986 .

The structure and strength of solvent welds between dissimilar amorphous thermoplastics

C. Yue, 1988 .

On the Structure and Strength of Solvent-Welded Joints: The Intrinsic Joint Strength and the Effect of Dissolved Polymer in the Solvent Cement

C. Yue, C. M. Chui, 1987 .

Rheological (visco-elastic behaviour) analysis of cyclic olefin copolymers with application to hot embossing for microfabrication

R. K. Jena, Xi Chen, Y. Lam, 2011 .

Effects of polymer melt compressibility on mold filling in micro-injection molding

Chee Yoon Yue, Yee Cheong Lam, Y. Lam, 2011 .

Effects of Mold Surface Roughness on Compressible Flow of Micro-Injection Molding

Y. Lam, C. Yue, X. Chen, 2012 .

Surface analysis, hydrophilic enhancement, ageing behavior and flow in plasma modified cyclic olefin copolymer (COC)-based microfluidic devices

Chee Yoon Yue, Sunanda Roy, Yee Cheong Lam, 2010 .

Fabrication of smart COC chips: Advantages of N-vinylpyrrolidone (NVP) monomer over other hydrophilic monomers

S. Venkatraman, Sunanda Roy, C. Yue, 2013 .

Influence of plasma surface treatment on thermal bonding and flow behavior in Cyclic Olefin Copolymer (COC) based microfluidic devices

Y. Lam, Sunanda Roy, C. Yue, 2011 .

Enhanced interphase between epoxy matrix and carbon fiber with carbon nanotube-modified silane coating

Jinglei Yang, Bin Yu, C. Yue, 2014 .

Effects of heat treatment on the mechanical properties of Kevlar-29 fibre

G. Sui, C. Yue, H. Looi, 2000 .

Thermal bonding of microfluidic devices : factors that affect interfacial strength of similar and dissimilar cyclic olefin copolymers

L. Anand, Sunanda Roy, C. Yue, 2012 .

Strength development and diffusion in symmetric and asymmetric pairs of amorphous COCs in the vicinity of Tg: A new modified temperature–pressure dependent model

Sunanda Roy, C. Yue, Zhe Wang, 2012 .

Development of nanocomposite for rigid riser application: Diallyl bisphenol A modified Bismaleimide / epoxy interpenetrating network and its nanocomposite (NH2-MWCNT)

R. K. Jena, C. Yue, Rajeeb Kumar Jena, 2016 .

Design, Manufacturing and Testing of Filament Wound Composite Risers for Marine and Offshore Applications

S. Joshi, Jinglei Yang, C. Yue, 2015 .

Numerical simulation of aluminum alloy 6061 micro-mold fabrication for the production of polymeric microstructures by micro-hot-embossing

Shawn A. Chester, L. Anand, Y. Lam, 2012 .

Triggering compatibility and dispersion by selective plasma functionalized carbon nanotubes to fabricate tough and enhanced Nylon 12 composites

Xiao Hu, Sunanda Roy, C. Yue, 2015 .

Specific functionalization and polymer grafting on multiwalled carbon nanotubes to fabricate advanced nylon 12 composites

X. F. Chen, Xiao Hu, Xuelong Chen, 2014 .

Interfacial strength of a microwave-cured epoxy-glass composite

F. Boey, C. Yue, 1991 .

Influence of thermal and microwave processing on the mechanical and interfacial properties of a glass/epoxy composite

C. Yue, H. Looi, 1995 .

Effect of a CNT based composite micromold on the replication fidelity during the microfabrication of polymeric microfluidic devices

R. K. Jena, C. Yue, K. X. Yun, 2014 .

A Modified Quasi-Creep Model for Assessment of Deformation of Topas COC Substrates in the Thermal Bonding of Microfluidic Devices: Experiments and Modeling

R. K. Jena, Y. Lam, Sunanda Roy, 2011 .

Functionalization of carbon nanotubes by argon plasma-assisted ultraviolet grafting

C. M. Li, Chang Ming Li, M. Chan-Park, 2005 .

Interpenetrating polymer networks based on modified cyanate ester resin

Xiao Hu, C. Yue, X. Hu, 2001 .

Improvements in transmittance, mechanical properties and thermal stability of silica–polyimide composite films by a novel sol–gel route

S. Fu, Yuanqing Li, C. Yue, 2007 .

Synthesis of polyaniline nanotubes using the self-assembly behavior of vitamin C: a mechanistic study and application in electrochemical supercapacitors

C. Yue, Moniruzzaman Sk, 2014 .

Interfacial slip between polymer melts studied by confocal microscopy and rheological measurements

Xiao Hu, Y. Lam, K. Tam, 2003 .

Effect of physical and geometrical factors on interfacial debonding in the fibre push-out test: A new strength-based model

C. Yue, N. Loh, L. Lee, 1996, Journal of Materials Science.

Enhanced molecular level dispersion and interface bonding at low loading of modified graphene oxide to fabricate super nylon 12 composites.

Xiao Hu, Sunanda Roy, C. Yue, 2015, ACS applied materials & interfaces.

Interaction of anti-adhesive silicone films with UV embossing resin

M. Chan-Park, C. Yue, Ya Yan, 2005 .

Microfabrication (Hot-Embossing) of COC Microfluidic Devices: Effect of Norbornene Content on Replication Fidelity and Surface Modification by UV-Photografting

R. K. Jena, C. Yue, 2013 .

Interfacial properties of fibre-reinforced composites

W. Cheung, C. Yue, 1992, Journal of Materials Science.

Analyses of the micromechanics of stress transfer in single- and multi-fiber pull-out tests

Y. Mai, Xiao Hu, S. Fu, 2000 .

The interfacial properties of fibrous composites

C. Yue, M. Y. Quek, 1994, Journal of Materials Science.

Interfacial properties of fibrous composites

W. Cheung, C. Yue, 1992 .

Mechanical, morphological, and thermal properties of poly(ethylene 2,6-naphthalate) and copolyester LCP blends

Xiao Hu, Y. Lam, K. Tam, 2001 .

Surface microstructures and epoxy bonded shear strength of Ti6Al4V alloy anodized at various temperatures

Jinglei Yang, Bin Yu, C. Yue, 2013 .

Synergistic effect on the fracture toughness of hybrid short glass fiber and short carbon fiber reinforced polypropylene composites

Y. Mai, S. Fu, B. Lauke, 2002 .

Robust multifunctional microcapsules with antibacterial and anticorrosion features

Xin Zhang, Jinglei Yang, Y. Chong, 2019, Chemical Engineering Journal.

Manufacture and evaluation of bioactive and biodegradable materials and scaffolds for tissue engineering

J. Weng, C. Yue, L. Chen, 2001, Journal of materials science. Materials in medicine.

Development and Characterization of Bismaleimides Containing Aliphatic Chain for Microelectronics Application

K. Chian, C. Yue, J. Feng, 2006 .

Synthesis and Characterization of the Bismaleimides Containing Aliphatic-ether Chain for Microelectronics Application

K. Chian, C. Yue, J. Feng, 2006 .

EFFECTS OF FIBER LENGTH AND ORIENTATION DISTRIBUTIONS ON THE MECHANICAL PROPERTIES OF SHORT-FIBER-REINFORCED POLYMERS

Xiao Hu, Chee Yoon Yue, Xiao Hu, 1999 .

On the elastic stress transfer and longitudinal modulus of unidirectional multi-short-fiber composites

Y. Mai, Xiao Hu, S. Fu, 2000 .

The morphology, character and strength of the interface in glass fibre-polypropylene composites

W. Cheung, C. Yue, 1991, Journal of Materials Science.

Effect of nanosilica and polyphosphazene elastomer on the in situ fibrillation of liquid crystalline polymer (LCP) and thermo-mechanical properties of polybutylene terephthalate (PBT)/LCP blend system

A. K. Saxena, C. Das, S. Sahoo, 2012 .

Cure reaction for modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide

Chee Yoon Yue, Santosh Kumar Rath, Freddy Yin Chiang Boey, 2002 .

Dielectric properties of self‐catalytic interpenetrating polymer network based on modified bismaleimide and cyanate ester resins

Xiao Hu, C. Yue, Jing Fan, 2003 .

Rheological study of crosslinking and gelation in bismaleimide/cyanate ester interpenetrating polymer network

Xiao Hu, Jing Fan, Chee Yoon Yue, 2001 .

Modeling the curing kinetics for a modified bismaleimide resin

F. Boey, C. Yue, Q. Zhao, 2000 .

Transparent cyclic olefin copolymer/silica nanocomposites

Xiao Hu, Sunanda Roy, C. Yue, 2014 .

Viscosity of COC polymer (TOPAS) near the glass transition temperature: Experimental and modeling

R. K. Jena, Y. Lam, C. Yue, 2010 .

Recent progress in synthesis, properties and potential applications of SiC nanomaterials

Kun Zhou, Chee Yoon Yue, Yi Pan, 2015 .

Review on advances in porous nanostructured nickel oxides and their composite electrodes for high-performance supercapacitors

R. K. Jena, C. Yue, K. Ghosh, 2016 .

Effect of nano-silica filler on the rheological and morphological properties of polypropylene/liquid-crystalline polymer blends

Xiao Hu, Y. Lam, K. Tam, 2003 .

A novel high performance poly (2-methyl thioaniline) based composite electrode for supercapacitors application

R. K. Jena, C. Yue, K. Ghosh, 2017 .

Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites

Xiao Hu, Bernd Lauke, Edith Mäder, 2000 .

Fracture resistance of short-glass-fiber-reinforced and short-carbon-fiber-reinforced polypropylene under Charpy impact load and its dependence on processing

Xiao Hu, S. Fu, B. Lauke, 1999 .

Effect of fillers on the structure and mechanical properties of LCP/PP/SiO2 in-situ hybrid nanocomposites

Xiao Hu, K. Tam, Mun-Wai Lee, 2003 .

Novel approach to fibrillation of LCP in an LCP/PP blend

Xiao Hu, K. Nakayama, K. Tam, 2002 .

Swellable elastomeric HNBR–MgO composite: Magnesium oxide as a novel swelling and reinforcement filler

Yucun Lou, S. Musso, C. Yue, 2014 .

Thermally Induced Association and Dissociation of Methylcellulose in Aqueous Solutions

Chee Yoon Yue, Yee Cheong Lam, Y. Lam, 2002 .

Effect of AlN fillers on the properties of a modified bismaleimide resin

F. Boey, C. Yue, Q. Zhao, 1999 .

Tribological properties of short carbon fibers reinforced epoxy composites

Xiao Hu, Jinglei Yang, C. Yue, 2014 .

Layer-by-layer (LBL) assembly of graphene with p-phenylenediamine (PPD) spacer for high performance supercapacitor applications

C. Yue, Moniruzzaman Sk, 2014 .

Facile growth of heparin-controlled porous polyaniline nanofiber networks and their application in supercapacitors

R. K. Jena, C. Yue, Moniruzzaman Sk, 2014 .

Lignin-assisted direct exfoliation of graphite to graphene in aqueous media and its application in polymer composites

Xuehong Lu, Wanshuang Liu, Dan Zhou, 2015 .

Static and dynamic mechanical properties of modified bismaleimide and cyanate ester interpenetrating polymer networks

Xiao Hu, C. Yue, Jing Fan, 2003 .

Wear resistant epoxy composites with diisocyanate-based self-healing functionality

Jinglei Yang, C. Yue, N. Khun, 2014 .

Effect of shear heating during injection molding on the morphology of PC/LCP blends

L. P. Tan, Xiao Hu, Y. Lam, 2003 .

Hybrid effects on tensile properties of hybrid short-glass-fiber-and short-carbon-fiber-reinforced polypropylene composites

Xiao Hu, Yiu-Wing Mai, Chee Yoon Yue, 2001 .

Differential scanning calorimetric determination of the volatile content and properties of epoxy prepreg

C. Yue, 1988 .

A novel high performance bismaleimide/diallyl bisphenol A (BMI/DBA)–epoxy interpenetrating network resin for rigid riser application

R. K. Jena, C. Yue, K. Ghosh, 2015 .

Adhesion Strengths of Epoxy Molding Compounds to Gold-plated Copper Leadframes

J. Hsieh, Jang‐Kyo Kim, C. Yue, 2000 .

Relationship between processing, microstructure, and mechanical properties of injection molded thermotropic LCP

Xiao Hu, K. Tam, C. Yue, 2003 .

Interfacial slip at the thermotropic liquid‐crystalline polymer/poly (ethylene naphthalate) interface

Xiao Hu, Y. Lam, K. Tam, 2004 .

Flow behaviour and microstructure evolution in novel SiO2/PP/LCP ternary composites: effects of filler properties and mixing sequence

Xiao Hu, K. Tam, Mun-Wai Lee, 2003 .

In situ composites: effect of elongational flow velocity on thermotropic liquid crystalline co-polyester fibrillation in thermoplastic/TLCP systems

Xiao Hu, K. Tam, C. Yue, 2001 .

Phase Diagram for Predicting In Situ Fibrillation of LCP During Molding

L. P. Tan, K. Nakayama, C. Yue, 2006 .

Effects of shear rate, viscosity ratio and liquid crystalline polymer content on morphological and mechanical properties of polycarbonate and LCP blends

L. P. Tan, Xiao Hu, Y. Lam, 2002 .

Thermal degradation study of interpenetrating polymer network based on modified bismaleimide resin and cyanate ester

Xiao Hu, C. Yue, Jing Fan, 2003 .

Effect of Mixing Sequence of Polymer and Nanofillers on Thermo Mechanical as well as Morphological Property of the Nanocomposites

C. Das, C. Yue, S. Kalra, 2012 .

Mechanical properties and morphology of LCP/ABS blends compatibilized with a styrene-maleic anhydride copolymer

Xiao Hu, Y. Lam, K. Tam, 2003 .

Self-Lubricating and Wear Resistant Epoxy Composites Incorporated With Microencapsulated Wax

Jinglei Yang, C. Yue, N. Khun, 2014 .

Characterization of fiber length distribution of short-fiber reinforced thermoplastics

Xiao Hu, Yiu-Wing Mai, Chee Yoon Yue, 2001 .

Synthesis of graphene/vitamin C template-controlled polyaniline nanotubes composite for high performance supercapacitor electrode

R. K. Jena, C. Yue, Moniruzzaman Sk, 2014 .

Combined effect of fiber content and microstructure on the fracture toughness of SGF and SCF reinforced polypropylene composites

Y. Mai, S. Fu, B. Lauke, 2002 .

Fracture behavior of short glass fibre and short carbon fibre reinforced polypropylene composites

Y. Mai, S. Fu, B. Lauke, 2002 .

Synthesis and characterization of block copolymers containing PC segments and PHTH‐6 mesogenic units

Xiao Hu, C. Yue, Xiongyan Zhao, 2002 .

Synthesis, characterization, and application of semi-interpenetrating liquid crystalline polymer networks LCP/PS

Xiao Hu, Xinyu Du, C. Yue, 2000 .

Influence of the molecular weight of ethylene vinyl acetate copolymers on the flow and mechanical properties of uncompatibilized polystyrene/ethylene–vinyl acetate copolymer blends

Xiao Hu, Y. Lam, K. Tam, 2001 .

CO2-laser micromachining of PMMA: the effect of polymer molecular weight

Chee Yoon Yue, Yee Cheong Lam, Nimai C. Nayak, 2008 .

Energy model of the interfacial slip of polymer blends under steady shear

Xiao Hu, Y. Lam, K. Tam, 2003 .

The flexural modulus of misaligned short-fiber-reinforced polymers

Xiao Hu, S. Fu, C. Yue, 1999 .

Changes in yield in polypropylene of different morphology caused by physical ageing

C. Yue, W. Msuya, 1990 .

Effect of surface treatment on mode I interlaminar fracture behaviour of plain glass woven fabric composites: Part I. Report of the 2nd round-robin test results

L. Drzal, C. Bathias, A. Ngo, 2000 .

Development of 3D Urchin-Shaped Coaxial Manganese Dioxide@Polyaniline (MnO2@PANI) Composite and Self-Assembled 3D Pillared Graphene Foam for Asymmetric All-Solid-State Flexible Supercapacitor Application.

R. K. Jena, C. Yue, Moniruzzaman Sk, 2017, ACS applied materials & interfaces.

Improved polymer encapsulation on multiwalled carbon nanotubes by selective plasma induced controlled polymer grafting.

Xiao Hu, Sunanda Roy, C. Yue, 2014, ACS applied materials & interfaces.

Interfacial properties of fibrous composites

W. Cheung, C. Yue, 1992 .

Factors which influence the reliability of the assessment of interfacial bonding in fibrous composites using the pull-out test

C. Yue, H. Looi, 2001 .

Assessment of fibre-matrix adhesion and interfacial properties using the pull-out test

C. Yue, M. Y. Quek, H. Looi, 1995 .

Effect of the loading system on the stress distribution in the fully embedded fibre pull-out test

C. Yue, H. Looi, 1994, Journal of Materials Science.

Some observations on the role of transcrystalline interphase on the interfacial strength of thermoplastic composites

W. Cheung, C. Yue, 1993 .

Discriminating between strength-based and fracture-based approaches in debonding in glass fibre-reinforced polypropylene composite

W. Cheung, C. Yue, 1991 .

Shrinkage artifacts in semi-spherical spherulites at the interface of glass fibre reinforced polypropylene

W. Cheung, C. Yue, 1990 .

Thermal and Morphological Properties of Polyetherimide Modified Bismaleimide Resins

Xiao Hu, C. Yue, Jian Zhang, 2000 .

Rheological and mechanical properties of compatibilized polystyrene/ethylene vinyl acetate blends

Xiao Hu, Y. Lam, K. Tam, 2004 .

Effects of bromination and hydrolysis treatments on the morphology and tensile properties of Kevlar-29 fibres

K. Chian, P. Lee-Sullivan, C. Yue, 1994 .

Effect of short-time annealing on solvent diffusion in PVC

C. Yue, B. Cherry, 1986 .

Production and evaluation of hydroxyapatite reinforced polysulfone for tissue replacement

C. Yue, M. Wang, B. Chua, 2001, Journal of materials science. Materials in medicine.

New deformation phenomenon for micro-formability of polycrystalline materials

M. Tan, Y. Lam, C. Yue, 2011 .

A green technique to prepare uniform amine capped multi-walled carbon nanotubes to fabricate high strength, protein resistant polymer nanocomposites

Xiao Hu, Sunanda Roy, C. Yue, 2015 .

Development of 3D MoO3/graphene aerogel and sandwich-type polyaniline decorated porous MnO2−graphene hybrid film based high performance all-solid-state asymmetric supercapacitors

C. Yue, Kalyan Ghosh, 2018, Electrochimica Acta.

Large-strain thermo-mechanical behavior of cyclic olefin copolymers: Application to hot embossing and thermal bonding for the fabrication of microfluidic devices

Lallit Anand, Rajeeb Kumar Jena, R. K. Jena, 2011 .

Micro fabrication of cyclic olefin copolymer (COC) based microfluidic devices

Rajeeb Kumar Jena, R. K. Jena, C. Y. Yue, 2012 .

Improvement of thermal bond strength and surface properties of Cyclic Olefin Copolymer (COC) based microfluidic device using the photo-grafting technique

Lallit Anand, Rajeeb Kumar Jena, R. K. Jena, 2011 .

Micro fabrication of cyclic olefin copolymer (COC) based microfluidic devices

R. K. Jena, C. Yue, Y. C. Lam, 2011, Microsystem Technologies.

Fabrication of High Aspect Ratio Poly(ethylene glycol)-Containing Microstructures by UV Embossing

Jun Zhang, Chee Yoon Yue, Mary B. Chan-Park, 2003 .

Surface Modification of COC Microfluidic Devices: A Comparative Study of Nitrogen Plasma Treatment and its Advantages Over Argon and Oxygen Plasma Treatments

Sunanda Roy, C. Y. Yue, Sunanda Roy, 2011 .

Annealing effects on the dynamic mechanical properties of aromatic polyphenylene sulphide fibre reinforced composite

T. Lee, F. Boey, C. Yue, 1991 .

PP/LCP composites: effects of shear flow, extensional flow and nanofillers

Lin Li, Xiao Hu, K. Tam, 2003 .

Fabrication and Release Behavior of Microcapsules with Double-Layered Shell Containing Clove Oil for Antibacterial Applications.

Jinglei Yang, Y. Chong, C. Yue, 2018, ACS applied materials & interfaces.

A New Model for the Transverse Modulus of Unidirectional Fiber Composites

Xiao Hu, S. Fu, C. Yue, 1998 .

Mechanical properties and morphology of poly(ethylene glycol)-side-chain-modified bismaleimide polymer

S. Yi, K. Chian, C. Yue, 2002 .

Synthesis of bismaleimide resin containing the poly(ethylene glycol) side chain: Curing behavior and thermal properties

S. Yi, K. Chian, C. Yue, 2002 .

Bonding strengths at plastic encapsulant–gold-plated copper leadframe interface

Sung Yi, Chee Yoon Yue, Jang-Kyo Kim, 2000 .

Effects of surface treatment and weave structure on interlaminar fracture behaviour of plain glass woven fabric composites: Part II. Report of the 2nd round robin test results

H. Hamada, L. Ye, J. Karger‐Kocsis, 2002 .

Axisymmetric stress distribution in the single filament pull-out test

Chee Yoon Yue, C. Yue, M. Y. Quek, 1994 .

Surface Modification and Thermal Bonding in COC Polymeric Microfluidic Chip

C. Yue, S. Roy, 2013 .

Effect of residual stresses in injection molded cyclic olefin copolymer during microfabrication: hot embossing as well as thermal bonding

R. K. Jena, A. Asundi, K. Dev, 2012 .

Cyclic olefin copolymer based microfluidic devices for biochip applications: Ultraviolet surface grafting using 2-methacryloyloxyethyl phosphorylcholine.

R. K. Jena, C. Yue, 2012, Biomicrofluidics.

Effect of polymer orientation on pattern replication in a micro-hot embossing process: experiments and numerical simulation

R. K. Jena, D. Boning, C. Yue, 2011 .

Development of a 3D graphene aerogel and 3D porous graphene/MnO2@polyaniline hybrid film for all-solid-state flexible asymmetric supercapacitors

R. K. Jena, C. Yue, S. Bi, 2018 .

Failure Behavior of Unidirectional Composites under Compression Loading: Effect of Fiber Waviness

A. Dasari, S. Narasimalu, C. Yue, 2017, Materials.

Comparison of different molds (epoxy, polymer and silicon) for microfabrication by hot embossing technique

Rajeeb Kumar Jena, R. K. Jena, Chee Yoon Yue, 2012 .

CF4 plasma treatment of poly(dimethylsiloxane): effect of fillers and its application to high-aspect-ratio UV embossing.

M. Chan-Park, C. Yue, Y. H. Yan, 2005, Langmuir : the ACS journal of surfaces and colloids.

Graphene oxide beads for fast clean-up of hazardous chemicals

Chee Yoon Yue, Pengfei Wang, Jinliang Zhao, 2016 .

Effects of oxidation and plasma cleaning on the adhesion strength of molding compounds to copper leadframes

J. Hsieh, S. Yi, C. Yue, 1999 .

The effect of fiber inclusions in toughened plastics—part I: fracture characterization by essential fracture work

S. Wong, G. Sui, C. Yue, 2001 .

Non-covalent interactions and supercapacitance of pseudo-capacitive composite electrode materials (MWCNTCOOH/MnO2/PANI)

R. K. Jena, C. Yue, Moniruzzaman Sk, 2015 .

HYDROXYAPATITE REINFORCED POLYSULFONE AS A NEW BIOMATERIAL FOR TISSUE REPLACEMENT

L. C. Kan, Min Wang, C. Yue, 1999 .

Graphene/heparin template-controlled polyaniline nanofibers composite for high energy density supercapacitor electrode

R. K. Jena, C. Yue, Moniruzzaman Sk, 2014 .

Title Failure Behavior of Unidirectional Composites underCompression Loading : Effect of Fiber Waviness

A. Dasari, S. Narasimalu, C. Yue, 2019 .

A failure criterion for debonding between encapsulants and leadframes in plastic IC packages

Jang-Kyo Kim, Sung Yi, Chee Yoon Yue, 2000 .

UV Embossing of Sub-micrometer Patterns on Biocompatible Polymeric Films Using a Focused Ion Beam Fabricated TiN Mold

B. Ngoi, M. Chan-Park, C. Yue, 2004 .

Evaluation of roughness, hardness, and strength of AA 6061 molds for manufacturing polymeric microdevices

Ming Jen Tan, Chee Yoon Yue, Yee Cheong Lam, 2012 .

Relaxation of liquid‐crystalline polymer fibers in polycarbonate–liquid‐crystalline polymer blend system

L. P. Tan, Xiao Hu, Y. Lam, 2003 .

The effect of fiber inclusions in toughened plastics - Part II: determination of micromechanical parameters

S. Wong, G. Sui, C. Yue, 2005 .

Characterization of microstructures and toughening behavior of fiber-containing toughened nylon 6,6

S. Wong, Y. Mai, G. Sui, 2002 .

Manufacturing of an aluminum alloy mold for micro-hot embossing of polymeric micro-devices

Ming Jen Tan, Chee Yoon Yue, Yee Cheong Lam, 2010 .

R. K. Jena, C. Yue, Moniruzzaman Sk, 2017, ACS applied materials & interfaces.

Applicability of Fracture-Based and Strength-Based Criteria to Debonding in Fibrous Composites

W. Cheung, C. Yue, 1991 .

Effect of compatibilization in injection-molded polycarbonate and liquid crystalline polymer blend

L. P. Tan, Xiao Hu, Y. Lam, 2002 .

Assessment of moisture content in nylon using differential scanning calorimetry

C. Chan, C. Yue, 1991 .

High fidelity hot-embossing of COC microdevices using a one-step process without pre-annealing of polymer substrate

R. K. Jena, Y. Lam, C. Yue, 2010 .