D. Stewart

发表

Abrasive wear behaviour of conventional and nanocomposite HVOF-sprayed WC–Co coatings

P. H. Shipway, P. Shipway, D. G. McCartney, 1999 .

Crystallographic evolution of MAX phases in proton irradiating environments

M. Preuss, M. Barsoum, D. Stewart, 2018 .

Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing

Moataz M. Attallah, M. Preuss, D. Stewart, 2017 .

Evaluating the Performance of Helmet Linings Incorporating Fluid Channels

L. Young, M. Gilchrist, D. Stewart, 2010 .

Assessing Substitution Effects on Surface Chemistry by in Situ Ambient Pressure X-ray Photoelectron Spectroscopy on Perovskite Thin Films, BaCe xZr0.9- xY0.1O2.95 ( x = 0; 0.2; 0.9).

E. Wachsman, I. Takeuchi, B. Eichhorn, 2018, ACS applied materials & interfaces.

Sliding wear of a self-mated thermally sprayed chromium oxide coating in a simulated PWR water environment

V. Ratia, P. Shipway, D. G. McCartney, 2019, Wear.

Three-dimensional finite element simulation and experimental validation of sliding wear

D. Dini, D. Stewart, A. Bastola, 2022, Wear.

Corrosion of cast Stellite-3 analogue in simulated PWR conditions

P. Shipway, D. Stewart, T. Hussain, 2018, Corrosion Science.

Understanding the microstructural evolution of silicide-strengthened hardfacing steels

M. Preuss, D. Stewart, D. Bowden, 2019, Materials & Design.

Microstructural evolution in thermally sprayed WC-Co coatings: Comparison between nanocomposite and conventional starting powders

P. H. Shipway, P. Shipway, D. G. McCartney, 2000 .

Fundamental Aspects of Functional Grading via Powder Hot Isostatic Pressing - Development of microstructure and diffusional processes

M. Preuss, D. Stewart, Emmanouil Stavroulakis, 2022, Materials & Design.

Corrosion performance of Ti3SiC2, Ti3AlC2, Ti2AlC and Cr2AlC MAX phases in simulated primary water conditions

M. Preuss, M. Barsoum, D. Stewart, 2018, Corrosion Science.

Influence of heat treatment on the abrasive wear behaviour of HVOF sprayed WC–Co coatings

P. H. Shipway, P. Shipway, D. G. McCartney, 1998 .

Ratcheting wear of a cobalt-chromium alloy during reciprocated self-mated dry sliding

G. Limbert, D. Stewart, R. J. Wood, 2019, Wear.

Microstructural characterisation of Tristelle 5183 (Fe-21%Cr-10%Ni-7.5%Nb-5%Si-2%C in wt%) alloy powder produced by gas atomisation

P. Shipway, D. Stewart, J. Daure, 2019, Materials & Design.

The effect of temperature on sliding wear of self-mated HIPed Stellite 6 in a simulated PWR water environment

P. Shipway, D. Stewart, D. Zhang, 2019, Wear.

A comparison of the galling wear behaviour of PVD Cr and electroplated hard Cr thin films

P. Shipway, D. Stewart, J. Daure, 2018, Surface and Coatings Technology.

Microstructural characterisation of subsurface deformation and the degradation of Stellite 6 induced by self-mated sliding contact in a simulated PWR environment

P. Shipway, D. G. McCartney, D. Stewart, 2021 .

Comparison of the sliding wear behaviour of self-mated HIPed Stellite 3 and Stellite 6 in a simulated PWR water environment

P. Shipway, D. Stewart, D. Zhang, 2019, Wear.

The effect of coating architecture and defects on the corrosion behaviour of a PVD multilayer Inconel 625/Cr coating

P. Shipway, D. Stewart, K. Voisey, 2017 .

The roles of adhesion, internal heat generation and elevated temperatures in normally loaded, sliding rough surfaces

F. Dunne, D. Dini, D. Stewart, 2019, International Journal of Solids and Structures.

Characterisation of Ferritic to Austenitic Steel Functional Grading via Powder Hot Isostatic Pressing

M. Preuss, D. Stewart, Emmanouil Stavroulakis, 2022, Materials Today Communications.

The friction of diamond-like carbon coatings in a water environment

G. Limbert, R. Wood, D. Stewart, 2013 .

The role of microstructural development in the hydrothermal corrosion of cast and HIPed Stellite 6 analogues in simulated PWR conditions

P. Shipway, D. Stewart, T. Hussain, 2019, Corrosion Science.

The identification of a silicide phase and its crystallographic orientation to ferrite within a complex stainless steel

M. Preuss, D. Stewart, D. Bowden, 2019, Journal of Nuclear Materials.

Sliding wear analysis of cobalt based alloys in nuclear reactor conditions

P. Shipway, D. Dini, D. Stewart, 2017 .

Adhesive transfer operates during galling

P. Shipway, D. Dye, D. Stewart, 2022, Scripta Materialia.

A crystal plasticity assessment of normally-loaded sliding contact in rough surfaces and galling

F. Dunne, A. Paxton, D. Stewart, 2018, Journal of the Mechanics and Physics of Solids.

Measurement of friction in galling testing – An example of its use in characterising the galling behaviour of hardfacings at ambient and elevated temperature

P. Shipway, D. Stewart, J. Daure, 2021, Wear.

The interaction of galling and oxidation in 316L stainless steel

M. Preuss, D. Dye, D. Dini, 2019, Wear.

Characterisation of the wear and friction behaviour of laser deposited cobalt and iron-based hardfacing alloys for nuclear applications

W. M. Rainforth, D. Stewart, J. Qi, 2023, Wear.

A comparative assessment of iron and cobalt-based hard-facing alloy deformation using HR-EBSD and HR-DIC

F. Dunne, D. Stewart, Jun Jiang, 2018, Acta Materialia.

A Functional Form for Wear Depth of a Ball and a Flat Surface

G. Limbert, R. Wood, D. Stewart, 2013, Tribology Letters.

A multiscale finite element model of sliding wear for cobalt-chromium undergoing ratcheting wear

G. Limbert, R. Wood, D. Stewart, 2020, Wear.