D. Chukov

发表

Fabrication of oriented UHMWPE films using low solvent concentration

A. P. Kharitonov, S. Kaloshkin, A. Maksimkin, 2017 .

Bulk Oriented UHMWPE/FMWCNT Films for Tribological Applications

V. D. Danilov, F. Senatov, A. Maksimkin, 2017, Polymers.

Coiled artificial muscles based on UHMWPE with large muscle stroke

V. Soprunyuk, A. Maksimkin, D. Chukov, 2019 .

Effect of Glass Fibers Thermal Treatment on the Mechanical and Thermal Behavior of Polysulfone Based Composites

D. Chukov, Galal Sherif, V. Tcherdyntsev, 2020, Polymers.

Investigation of structure, mechanical and tribological properties of short carbon fiber reinforced UHMWPE-matrix composites

V. V. Tcherdyntsev, A. V. Maksimkin, S. D. Kaloshkin, 2015 .

Low-Temperature Carbonized Elastomer-Based Composites Filled with Silicon Carbide

A. Stepashkin, S. Kaloshkin, D. Chukov, 2020, Polymers.

The Structural and Mechanical Properties of the UHMWPE Films Mixed with the PE-Wax

S. Kaloshkin, D. Chukov, T. Dayyoub, 2020, Materials.

Structure, Mechanical and Thermal Properties of Polyphenylene Sulfide and Polysulfone Impregnated Carbon Fiber Composites

A. Stepashkin, D. Chukov, M. Zadorozhnyy, 2019, Polymers.

Highly filled elastomeric matrix composites: Structure and property evolution at low temperature carbonization

A. Stepashkin, S. Kaloshkin, D. Chukov, 2018, Materials & Design.

The Analysis of Micro-Scale Deformation and Fracture of Carbonized Elastomer-Based Composites by In Situ SEM

A. Stepashkin, S. Kaloshkin, A. Korsunsky, 2021, Molecules.

Operando in-SEM Study of Micro-Deformation and Fracture Behaviour of Carbonized Elastomer-Based Composites

A. Stepashkin, S. Kaloshkin, A. Korsunsky, 2020 .

REINFORCEMENT OF EPOXY RESIN COMPOSITES WITH FLUORINATED CARBON NANOTUBES

A. P. Kharitonov, A. Tkachev, D. Chukov, 2015 .

Thermal properties of carbonized composite materials based on carbon filled elastomeric matrices

A. Stepashkin, S. Kaloshkin, D. Chukov, 2018, International Journal of Materials Research.

On the Structural Peculiarities of Self-Reinforced Composite Materials Based on UHMWPE Fibers

A. Korsunsky, D. Chukov, I. Larin, 2021, Polymers.

Mechanical and Thermophysical Properties of Carbon Fiber-Reinforced Polyethersulfone

A. Stepashkin, D. Chukov, I. Larin, 2022, Polymers.

Novel carbon fibers reinforced composites based on polysulfone matrix

A. Stepashkin, D. Chukov, V. Tcherdyntsev, 2018 .

Comparative analysis of the tribological characteristics of canine joint cartilage and UHMWPE-based biomimetic materials

F. Senatov, A. Maksimkin, D. Chukov, 2017 .

3D-printed scaffolds based on PLA/HA nanocomposites for trabecular bone reconstruction

A. V. Maksimkin, S. D. Kaloshkin, F. Senatov, 2016 .

Bulk oriented nanocomposites of ultrahigh molecular weight polyethylene reinforced with fluorinated multiwalled carbon nanotubes with nanofibrillar structure

A. P. Kharitonov, F. Senatov, S. Kaloshkin, 2016 .

Carbonised composite materials based on elastomers filled with carbon nanofillers

A. Stepashkin, S. Kaloshkin, D. Chukov, 2018 .

Hybrid Self-Reinforced Composite Materials Based on Ultra-High Molecular Weight Polyethylene

D. Chukov, V. Torokhov, D. Zherebtsov, 2020, Materials.

3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties

F. Senatov, S. Kaloshkin, A. Korsunsky, 2018 .

Transformation of the lamellar structure into nanofibrillar structure in the bulk oriented ultra high molecular weight polyethylene: mechanical and tribological properties

V. D. Danilov, A. P. Kharitonov, F. Senatov, 2016 .

Effect of Formation Route on the Mechanical Properties of the Polyethersulfone Composites Reinforced with Glass Fibers

D. Chukov, Galal Sherif, V. Tcherdyntsev, 2019, Polymers.

Electron microscopy investigation of interface between carbon fiber and ultra high molecular weight polyethylene

A. Stepashkin, S. Kaloshkin, M. Gorshenkov, 2014 .

Structure and properties of composites based on polyphenylene sulfide reinforced with Al-Cu-Fe quasicrystalline particles

A. Stepashkin, S. Kaloshkin, D. Chukov, 2018 .

Formation of ethylene-vinyl acetate composites filled with Al–Cu–Fe and Al–Cu–Cr quasicrystallline particles

F. Senatov, A. Stepashkin, D. Chukov, 2019, Journal of Materials Research and Technology.

Manufacturing of Single-Polymer Composite Materials Based on Ultra-High Molecular Weight Polyethylene Fibers by Hot Compaction

D. Chukov, V. Torokhov, D. Zherebtsov, 2020, Journal of Materials Engineering and Performance.

Comparison between self-reinforced composites based on ultra-high molecular weight polyethylene fibers and isotropic UHMWPE

A. Maksimkin, D. Chukov, V. Torokhov, 2020 .

Carbonized elastomer based composites filled with carbon fillers and silicon carbide

A. Stepashkin, S. Kaloshkin, D. Chukov, 2018 .

Structure and Properties of Polysulfone Filled with Modified Twill Weave Carbon Fabrics

A. Stepashkin, D. Chukov, M. Zadorozhnyy, 2019, Polymers.

Effect of carbon fiber surface modification on their interfacial interaction with polysulfone

A. Stepashkin, D. Chukov, Galal Sherif, 2019, Results in Physics.

Strength and thermophysical properties of composite polymer materials filled with discrete carbon fiber

V. D. Danilov, A. Stepashkin, S. Kaloshkin, 2014, Inorganic Materials: Applied Research.

Effect of high‐energy ball milling on the structure and mechanical properties of ultra‐high molecular weight polyethylene

S. Kaloshkin, A. Maksimkin, D. Chukov, 2013 .

Investigation of contact surfaces between polymer matrix and metallic glasses in composite materials based on high-density polyethylene

A. A. Tsarkov, S. Kaloshkin, D. V. Louzguine-Luzgin, 2016 .

Surface modification of carbon fibers and its effect on the fiber–matrix interaction of UHMWPE based composites

A. Stepashkin, S. Kaloshkin, M. Gorshenkov, 2014 .

Mechanical Properties and Chemical Resistance of New Composites for Oil Pump Impellers

A. Stepashkin, S. Kaloshkin, D. Chukov, 2018 .

Quasicrystalline Powders as the Fillers for Polymer-Based Composites: Production, Introduction to Polymer Matrix, Properties

A. Stepashkin, D. Chukov, A. Salimon, 2018 .

Technologies for Manufacturing Ultrahigh Molecular Weight Polyethylene-Based Porous Structures for Bone Implants

S. Kaloshkin, A. Maksimkin, D. Chukov, 2013, BioMed 2013.

Fracture Toughness of Moldable Low-Temperature Carbonized Elastomer-Based Composites Filled with Shungite and Short Carbon Fibers

A. Stepashkin, D. Chukov, A. Salimon, 2022, Polymers.

Continuous detection of the torque during shear deformation as a method for estimating the evolution of structure-phase transformations

V. Lad’yanov, D. Chukov, G. Dorofeev, 2014, Russian Metallurgy (Metally).