D. Mondal

发表

Low-velocity impact characteristics of closed cell AA2014-SiCp composite foam

M. D. Goel, S. Sahu, D. Mondal, 2019, Composites Part B: Engineering.

Effect of MWCNTs addition on the wear and compressive deformation behavior of LM13-SiC-MWCNTs hybrid composites

D. Mondal, B. Yadav, Gaurav Verma, 2018, Tribology International.

Lightweight carbon-red mud hybrid foam toward fire-resistant and efficient shield against electromagnetic interference

A. Srivastava, A. Pandey, A. Srivastava, 2020, Scientific Reports.

Dynamic compression behavior of cenosphere aluminum alloy syntactic foam

M. D. Goel, S. Marburg, Martin Larcher, 2012 .

Effect of Mechanical Alloying and Sintering Environment on the Crystallographic Evolution, Microstructure, Mechanical and Corrosion Properties of Porous Ti4Al4Co Alloy

D. Mondal, I. B. Singh, Pradeep K. Singh, 2021, Metals and Materials International.

Studies on Microstructure, Mechanical Properties, and Corrosion Behavior, of Partially Open-Cell Magnesium Foam through Powder Metallurgy Route

A. Pandey, D. Mondal, Ruchi Dubey, 2022, Journal of Materials Engineering and Performance.

Phenol formaldehyde resin derived carbon-MCMB composite foams for electromagnetic interference shielding and thermal management applications

A. Srivastava, N. Dwivedi, D. Mondal, 2020 .

Thermal insulating and fire-retardant lightweight carbon-slag composite foams towards absorption dominated electromagnetic interference shielding

A. Srivastava, N. Dwivedi, D. Mondal, 2022, Sustainable Materials and Technologies.

Enhanced electromagnetic interference shielding properties of phenolic resin derived lightweight carbon foam decorated with electrospun zinc oxide nanofibers

A. Srivastava, S. Dhakate, Ashish Gupta, 2021, Materials Today Communications.

Excellent EMI shielding performance and thermal insulating properties in lightweight, multifunctional carbon-cenosphere composite foams

Rajeev Kumar, D. Mondal, S. Kumari, 2018, Composites Part A: Applied Science and Manufacturing.

Microarchitecture and compressive deformation behaviour of Al-alloy (LM13)–cenosphere hybrid Al-foam prepared using CaCO3 as foaming agent

S. Das, D. Mondal, Nidhi Jha, 2013 .

A New Approach to In-Situ Co3o4 Nanostructure Decorated Free-Standing Carbon Foam Derived from Phenolic Resin for High-Performance Supercapacitor

N. Dwivedi, D. Mondal, D. Muchhala, 2022, SSRN Electronic Journal.

Mechanical Properties of Phenolic Foams

Shashank Srivastava, A. Pandey, D. Mondal, 2022, Phenolic Based Foams.

Partially open cell Ti-6Al-2Co ternary alloy foams with a range of size and volume fraction of spacer particle

A. Pandey, D. Mondal, B. Yadav, 2021 .

Effect of cell size on the microarchitectural and physicomechanical response in open-cell Al foam made through template method

A. Pandey, D. Mondal, Hemant Jain, 2023, Materials Chemistry and Physics.

Cenosphere filled aluminum syntactic foam made through stir-casting technique

S. Das, D. Mondal, D. Mondal, 2009 .

High temperature deformation behavior of closed cell ZnAl27 hybrid foam made through stir casting technique

Manoj, D. Mondal, D. M. Afzal Khan, 2018, Materials Science and Engineering: A.

Effect of cenosphere particle size and relative density on the compressive deformation behavior of aluminum-cenosphere hybrid foam

S. Das, D. Mondal, Shyam Birla, 2017 .

Compressive deformation behavior and strain rate sensitivity of Al-cenosphere hybrid foam with mono-modal, bi-modal and tri-modal cenosphere size distribution

A. Pandey, S. Das, D. Mondal, 2018, Materials Characterization.

Studies on Microstructure, Mechanical Properties, and Corrosion Behavior, of Partially Open-Cell Magnesium Foam through Powder Metallurgy Route

A. Pandey, D. Mondal, Ruchi Dubey, 2022, Journal of Materials Engineering and Performance.

An effective process to reinforced open cell 316LSS foams with MWCNT for improving biocompatibility

A. Pandey, D. Mondal, Hemant Jain, 2022, Materials Chemistry and Physics.

Microstructure and Mechanical Properties of SiC/Mullite Reinforced A356 Composite Foam

D. Mondal, D. Muchhala, S. Sriram, 2022, Journal of Materials Engineering and Performance.

Microstructural evolution, compressive deformation and corrosion behaviour of thermally oxidized porous Ti4Al4Co alloy made of mechanically alloyed powder

Shashank Srivastava, P. Agarwal, D. Mondal, 2021 .

Three dimension phenolic resin derived carbon-CNTs hybrid foam for fire retardant and effective electromagnetic interference shielding

A. Srivastava, N. Dwivedi, D. Mondal, 2020 .

Electromagnetic Interference Shielding in Phenolic Foam

D. Mondal, A. Pandey, Rajeev Kumar, 2022, Phenolic Based Foams.

Effect of milling time on powder characteristics and mechanical performance of Ti4wt%Al alloy

D. Mondal, D. Mondal, I. B. Singh, 2019, Powder Technology.

Fabrication of ultra-light LM13 alloy hybrid foam reinforced by MWCNTs and SiC through stir casting technique

D. Mondal, B. Yadav, D. Muchhala, 2020 .

Study on activation energy and strain rate sensitivity of closed-cell aluminium hybrid composite foam

D. Mondal, B. Yadav, D. Muchhala, 2020 .

Flexural deformation behavior of carbon fiber reinforced aluminium hybrid foam sandwich structure

A. Pandey, D. Mondal, D. Muchhala, 2020 .

Energy Absorption Behavior of Al-SiC-Graphene Composite Foam under a High Strain Rate

S. Khanna, D. Rajak, D. Mondal, 2020, Materials.

Influences of relative density and strain rate on the mechanical properties of Al-cenosphere-SWNTs hybrid foams

A. Pandey, D. Mondal, G. Gupta, 2021 .

Effect of SWCNTs content and relative density on the energy absorption capabilities of closed-cell Al-cenosphere-SWCNTs hybrid foam

D. Mondal, B. Yadav, D. Muchhala, 2019, Composites Part B: Engineering.

Compressive deformation and corrosion behaviour of moderate to highly porous Ti4Al4Co (wt%) alloy foam

D. Mondal, I. B. Singh, B. Yadav, 2021 .

Fabrication of Graphene-Reinforced Closed-Cell Aluminum Foam and Characterization at High Strain Rates

D. Mondal, D. Muchhala, S. Khanna, 2022, Journal of Materials Engineering and Performance.

Compressive deformation behavior of closed cell LM-13 aluminum alloy foam using finite element analysis

D. Mondal, S. Panthi, K. Verma, 2020 .

Microstructure and compressive deformation behavior of SS foam made through evaporation of urea as space holder

D. Mondal, G. Gupta, Rajeev Kumar, 2019, Materials Chemistry and Physics.

Microstructure, mechanical and EMI shielding performance in open cell austenitic stainless steel foam made through PU foam template

D. Mondal, R. Kumar, D. Mondal, 2020 .

Effect of interlamellar spacing on microhardness and yield strength of annealed Ti6AlCo alloys made by powder sintering method

D. Mondal, Amit Abhash, 2020 .

Synergic effect of MWCNTs and SiC addition on microstructure and mechanical properties of closed-cell Al–SiC-MWCNTs HCFs

D. Mondal, B. Yadav, D. Muchhala, 2019, Composites Part B: Engineering.

Properties of Zn foam filled with cenosphere microballoons

D. Mondal, Manoj Mohbe, 2021 .

Silver Flowers Decorated Open Cell Stainless Steel Foam for bone scaffold application

D. Mondal, Hemant Jain, Rajeev Kumar, 2023, Materials Today Communications.

Compressive Deformation Behavior of Al–SiC–MWCNTs Hybrid Composite Foam Through Factorial Design of Experiments

D. Mondal, G. Gupta, B. Yadav, 2019, Transactions of the Indian Institute of Metals.

Effect of temperature and strain rate on the compressive deformation response of closed-cell aluminium hybrid foams

A. Pandey, D. Mondal, B. Yadav, 2021, Journal of Alloys and Compounds.