P. Hine

发表

Modelling of the energy absorption by polymer composites upon ballistic impact

Debra J. Carr, Peter Hine, I. M. Ward, 2000 .

Numerical simulation of the effects of volume fraction, aspect ratio and fibre length distribution on the elastic and thermoelastic properties of short fibre composites

Andrei A. Gusev, Peter Hine, A. A. Gusev, 2002 .

Stiffness and Thermal Expansion of Short Fiber Composites with Fully Aligned Fibers

P. Hine, H. R. Lusti, A. Gusev, 2002 .

Direct numerical predictions for the elastic and thermoelastic properties of short fibre composites

Andrei A. Gusev, Peter Hine, A. A. Gusev, 2002 .

Orientation Averaging for Stiffness and Thermal Expansion of Short Fiber Composites

P. Hine, H. R. Lusti, A. Gusev, 2002 .

Validation of the modified rule of mixtures using a combination of fibre orientation and fibre length measurements

P. Hine, D. Brands, B. Parveen, 2014 .

Failure mechanisms in carbon-fibre-reinforced poly(ether sulphone)

I. Ward, P. Hine, R. Duckett, 1992 .

Measuring the development of fibre orientation during the melt extrusion of short glass fibre reinforced polypropylene

I. Ward, P. Coates, P. Hine, 1997 .

Novel phase separated multi-phase materials combining high viscoelastic loss and high stiffness

I. Ward, A. A. Gusev, P. Hine, 2018, Composites Science and Technology.

Fiber packing and elastic properties of a transversely random unidirectional glass/epoxy composite

Andrei A. Gusev, Peter Hine, I. M. Ward, 2000 .

Validating a micromechanical modelling scheme for predicting the five independent viscoelastic constants of unidirectional carbon fibre composites

A. A. Gusev, P. Hine, 2019, International Journal of Engineering Science.

On the possibility of reduced variable predictions for the thermoelastic properties of short fibre composites

A. A. Gusev, P. Hine, H. R. Lusti, 2004 .

Modelling the elastic properties of fibre-reinforced composites: II theoretical predictions

I. Ward, P. Hine, R. Duckett, 1993 .

Structure of interacting aggregates of silica nanoparticles in a polymer matrix: small-angle scattering and reverse Monte Carlo simulations.

J. Oberdisse, P. Hine, W. Pyckhout-Hintzen, 2007, Soft matter.

Identification and validation of a hyperelastic model for self-reinforced polypropylene draping

P. Boisse, L. Gorbatikh, S. Lomov, 2020, International Journal of Material Forming.

The use of interleaved films for optimising the production and properties of hot compacted, self reinforced polymer composites

Peter Hine, I. M. Ward, Robert H. Olley, 2008 .

Intralayer hybridisation to combine the ductility of self-reinforced polypropylene with the stiffness of carbon fibre

I. Ward, L. Gorbatikh, I. Verpoest, 2015 .

Hybrid carbon fibre/nylon 12 single polymer composites

I. Ward, I. Verpoest, P. Hine, 2014 .

Tensile behaviour of carbon fibre composites hybridised with self-reinforced polypropylene

I. Ward, L. Gorbatikh, I. Verpoest, 2013 .

The use of an interleaved film for optimising the properties of hot compacted polyethylene single polymer composites

I. Ward, P. Hine, A. P. Unwin, 2011 .

The incorporation of carbon nanofibres to enhance the interlayer adhesion of hot compacted single-polymer polypropylene composites

I. Ward, P. Hine, Richard Foster, 2010 .

The hot compaction of 2-dimensional woven melt spun high modulus polyethylene fibres

I. Ward, R. H. Olley, D. Bassett, 2000 .

The hot compaction behaviour of woven oriented polypropylene fibres and tapes. I. Mechanical properties

I. Ward, R. H. Olley, D. Bassett, 2003 .

The hot compaction of polypropylene fibres

I. Ward, R. H. Olley, D. Bassett, 1996, Journal of Materials Science.

The hot compaction of woven polypropylene tapes

P. Hine, M. Ward, J. Teckoe, 1998 .

A COMPARISON OF THE HOT-COMPACTION BEHAVIOR OF ORIENTED, HIGH-MODULUS, POLYETHYLENE FIBERS AND TAPES*

I. Ward, R. H. Olley, D. Bassett, 2001 .

Hot compaction of woven poly(ethylene terephthalate) multifilaments

I. Ward, P. Hine, 2004 .

Hot compaction of woven nylon 6,6 multifilaments

I. Ward, P. Hine, 2006 .

The fracture behaviour of short glass fibre-reinforced polyoxymethylene

I. Ward, P. Hine, R. Duckett, 1993 .

Interlaminar and intralaminar fracture toughness of uniaxial continuous and discontinuous carbon fibre/epoxy composites

P. Hine, R. Duckett, R. Truss, 1997 .

Toward In Silico Design of Highly Tunable Liquid Crystal Elastomers

Ethan I. L. Jull, P. Hine, H. Gleeson, 2022, Macromolecules.

Romp: The Method of Choice for Precise Macromolecular Engineering and Synthesis of Smart Materials

P. Hine, L. R. Hutchings, Thomas C. Castle, 2009 .

Structure property relationships in linear and cross-linked poly(imidonorbornenes) prepared using ring opening metathesis polymerisation (ROMP)

P. Hine, R. Duckett, W. Feast, 2001 .

Time-Temperature Superposition of the Dissolution of Silk Fibers in the Ionic Liquid 1-Ethyl-3-methylimidazolium Acetate.

P. Hine, M. Ries, Xin Zhang, 2021, Biomacromolecules.

Die drawn wood polymer composites. II. Micromechanical modelling of tensile modulus

I. Ward, D. Barton, P. Hine, 2010 .

Comparative Experimental and Molecular Simulation Study of the Entropic Viscoelasticity of End-Linked Polymer Networks

A. A. Gusev, W. Caseri, P. Hine, 2020 .

Time Temperature Superposition of the Dissolution of Cellulose Fibres by the Ionic Liquid 1-ethyl-3-methylimidazolium acetate with cosolvent Dimethyl Sulfoxide

P. Hine, M. Ries, James E. Hawkins, 2020 .

Predicting the visco-elastic properties of polystyrene/SIS composite blends using simple analytical micromechanics models

I. Ward, A. A. Gusev, T. Schweizer, 2017 .

Fiber orientation structures and mechanical properties of injection molded short glass fiber reinforced ribbed plates

P. Hine, R. Duckett, 2004 .

Dissolution of cotton by 1-ethyl-3-methylimidazolium acetate studied with time–temperature superposition for three different fibre arrangements

P. Hine, M. Ries, James E. Hawkins, 2020, Cellulose.

Introducing ductility in hybrid carbon fibre/self-reinforced composites through control of the damage mechanisms

I. Ward, L. Gorbatikh, P. Hine, 2015 .

Effect of High Modulus Polyethylene Fibre Surface Treatment on Epoxy Resin Composite Impact Properties

I. Ward, P. Hine, R. Duckett, 1994 .

An investigation into the constriction flow of a particle reinforced polystyrene melt using a combination of flow visualization and finite element simulations

M. Tassieri, P. Hine, J. Embery, 2010 .

A Study of the Rheology, Processing and Flow Induced Mesostructures of Glass Bead Filled Polystyrene

M. Tassieri, P. Hine, J. Embery, 2008 .

Mechanical and acoustic frequency responses in flat hot-compacted polyethylene and polypropylene panels

I. Ward, P. Hine, J. N. Hay, 2006 .

Compaction of high-modulus melt-spun polyethylene fibres at temperatures above and below the optimum

I. Ward, D. Bassett, P. Hine, 1994, Journal of Materials Science.

On morphologies developed during two‐dimensional compaction of woven polypropylene tapes

I. Ward, D. Bassett, T. Amornsakchai, 2000 .

Differential melting in compacted high-modulus melt-spun polyethylene fibres

I. Ward, D. Bassett, P. Hine, 1995, Journal of Materials Science.

The hot compaction of SPECTRA gel-spun polyethylene fibre

I. Ward, D. Bassett, P. Hine, 1997 .

Polypropylene hybrid composites reinforced with long glass fibres and particulate filler

K. Friedrich, P. Hine, R. Duckett, 2005 .

A simulation-driven design approach to the manufacturing of stiff composites with high viscoelastic damping

R. Spolenak, A. A. Gusev, P. Hine, 2021 .

Hydro and thermal stability of die drawn wood polymer composites in comparison to solid wood

I. Ward, D. Barton, P. Hine, 2012 .

Organisation of self-assembling peptide nanostructures into macroscopically ordered lamella-like layers by ice crystallisation

T. McLeish, A. Aggeli, N. Boden, 2009 .

Hot compaction of polyethylene naphthalate

I. M. Ward, I. Ward, P. Hine, 2004 .

The science and technology of hot compaction

I. Ward, P. Hine, 2004 .

The hot compaction behaviour of woven oriented polypropylene fibres and tapes. II. Morphology of cloths before and after compaction

Peter Hine, I. M. Ward, Robert H. Olley, 2003 .

Novel composites by hot compaction of fibers

I. Ward, P. Hine, 1997 .

Structure of interacting aggregates of silica nanoparticles in a polymer matrix: small-angle scattering and reverse Monte Carlo simulations.

J. Oberdisse, P. Hine, W. Pyckhout-Hintzen, 2007, Soft matter.

Liquid Crystal Elastomers for Biological Applications

Ethan I. L. Jull, P. Hine, H. Gleeson, 2021, Nanomaterials.

The importance of bonding in intralayer carbon fibre/self-reinforced polypropylene hybrid composites

I. Ward, L. Gorbatikh, P. Hine, 2015 .

Die drawn wood polymer composites. I. Mechanical properties

I. Ward, D. Barton, P. Hine, 2010 .

The hot compaction of high modulus melt-spun polyethylene fibres

I. Ward, D. Bassett, P. Hine, 1993 .

Hydrostatically extruded glass fiber reinforced polyoxymethylene. II: Modeling the elastic properties

I. Ward, P. Hine, R. Duckett, 1997 .

Identification and validation of a hyperelastic model for self-reinforced polypropylene draping

P. Boisse, L. Gorbatikh, S. Lomov, 2020, International Journal of Material Forming.

High Stiffness and High Impact StrengthPolymer Composites by Hot Compaction ofOriented Fibers and Tapes

I. Ward, A. Hiltner, E. Baer, 2005 .

The thermal-expansion behaviour of hot-compacted polypropylene and polyethylene composites

I. Ward, P. Hine, Y. Bozec, 2000 .

The morphology of woven polypropylene tapes compacted at temperatures above and below optimum

I. Ward, D. Bassett, P. Hine, 1999 .

The incorporation of carbon nanofibres to enhance the properties of self reinforced, single polymer composites

I. Ward, P. Hine, Vivien Broome, 2005 .

Hydrostatically extruded glass‐fiber‐reinforced polyoxymethylene. I: The development of fiber and matrix orientation

Peter Hine, I. M. Ward, I. Ward, 1996 .

Modelling the elastic and thermoelastic properties of short fibre composites with anisotropic phases

C. D. Price, I. Ward, B. Whiteside, 2006 .

Fibre orientation structures and their effect on crack resistance of injection moulded transverse ribbed plate

P. Coates, P. Hine, R. Duckett, 2004 .

A comparison of short glass fiber reinforced polypropylene plates made by conventional injection molding and using shear controlled injection molding

I. Ward, P. Hine, R. Duckett, 1996 .

The influence of the hybridisation configuration on the mechanical properties of hybrid self reinforced polyamide 12/carbon fibre composites

I. Ward, I. Verpoest, P. Hine, 2017 .

Measuring the fibre orientation and modelling the elastic properties of injection-moulded long-glass-fibre-reinforced nylon

Peter Hine, I. M. Ward, I. Ward, 1995 .

Study of injection moulded long glass fibre-reinforced polypropylene and the effect on the fibre length and orientation distribution

P. Hine, F. Costa, X. Jin, 2014 .

Analysis of fibre orientation distribution in short fibre reinforced polymers: A comparison between optical and tomographic methods

Francesca Cosmi, Andrea Bernasconi, Peter Hine, 2012 .

Investigation into thermoformability of hot compacted polypropylene sheet

I. Ward, W. Prosser, P. Hine, 2000 .

9 – Forming self-reinforced polymer materials

I. Ward, P. Hine, 2007 .

Anisotropic elasticity of oriented polyethylene materials

I. Ward, P. Hine, R. Duckett, 1995 .

Tensile behaviour of intralayer hybrid composites of carbon fibre and self-reinforced polypropylene

Yentl Swolfs, Ignaas Verpoest, Peter Hine, 2014 .

Interlayer hybridization of unidirectional glass fibre composites with self-reinforced polypropylene

I. Ward, L. Gorbatikh, I. Verpoest, 2012 .

The development of morphology during hot compaction of Tensylon high-modulus polyethylene tapes and woven cloths

I. Ward, D. Bassett, P. Hine, 2002 .

Morphology of compacted polyethylene fibres

I. Ward, D. Bassett, P. Hine, 1993, Journal of Materials Science.

Elastic property estimates of a unidirectional discontinuous fibre composite

I. Ward, P. Hine, R. Duckett, 1999 .

Hot compacted polypropylene sheet

I. Ward, P. Hine, B. Brew, 1998 .

The effect of the measurement frequency on the elastic anisotropy of fibre laminates

I. Ward, P. Hine, M. Landert, 2005 .

A double-torsion study of the fracture of polyethersulphone

I. Ward, P. Hine, R. Duckett, 1984 .

A coarse‐grained molecular model of strain‐hardening for polymers in the marginally glassy state

Daniel Read, Manlio Tassieri, Peter Hine, 2011 .

Shape memory and stress relaxation behaviour of oriented mono-dispersed polystyrene

I. Ward, P. Hine, R. A. Chivers, 2014 .

Optimizing the damping properties of unidirectional composites by incorporating carbon fibers with a thin viscoelastic coating

A. A. Gusev, P. Hine, Leyla S. Kern, 2019, Composite Structures.

Escaping the Ashby limit for mechanical damping/stiffness trade-off using a constrained high internal friction interfacial layer

I. Ward, A. A. Gusev, P. Hine, 2018, Scientific Reports.

Negative Poisson's ratios in angle-ply laminates: theory and experiment

Peter Hine, I. M. Ward, I. Ward, 1994 .

The properties of PIPD-fibre/epoxy composites

I. Ward, P. Hine, B. Brew, 1999 .

Failure mechanisms in continuous carbon-fibre reinforced PEEK composites

Peter Hine, I. M. Ward, I. Ward, 1989 .

The fracture behaviour of carbon fibre reinforced poly(ether etherketone)

I. Ward, P. Hine, R. Duckett, 1988 .

Measuring the elastic properties of high-modulus fibres

I. Ward, P. Hine, 1996 .

Properties of the quaternary amorphous alloy Pd40Ni40B10P10

J. Matthew, P. Hine, S. Kilcoyne, 2005 .

The effect of hydrostatic pressure on the mechanical properties of glass fibre/epoxy unidirectional composites

As Kaddour, Peter Hine, A. Kaddour, 2005 .

The impact properties of hybrid composites reinforced with high-modulus polyethylene fibres and glass fibres

I. Ward, P. Hine, D. Woods, 1994 .

Adhesion of microfibrous surfaces on steel and copper to epoxy resins

P. Hine, D. Packham, S. E. Muddarris, 1987 .

A microindentation study of polyethylene composites produced by hot compaction

I. Ward, P. Hine, F. Calleja, 2006 .

THE HOT COMPACTION OF WOVEN POLYETHYLENE TEREPHTHALATE MULTIFILAMENTS

I. Ward, P. Hine, 2004 .

MEASUREMENT AND PREDICTION OF SHORT GLASS FIBRE ORIENTATION IN INJECTION MOULDING COMPOSITES

P. Hine, F. Costa, B. Parveen, 2012 .

On the use of milled shell‐only specimens to study the effect of fiber orientation on the fatigue behavior of a short fiber‐reinforced polyamide

P. Hine, A. Bernasconi, L. M. Martulli, 2022, Fatigue & Fracture of Engineering Materials & Structures.

An experimental investigation of the combined influence of notch size and fibre orientation on the fatigue strength of a short glass fibre reinforced polyamide 6

P. Hine, A. Bernasconi, E. Conrado, 2015 .

The hot compaction of polyethylene terephthalate

I. Ward, D. Bassett, P. Hine, 1995, Journal of Materials Science.

Dissolution dynamics of woven all-silk composites fabricated in the ionic liquid 1-ethyl-3-methylimidazolium acetate

P. Hine, M. Ries, Xin Zhang, 2023, Composites Science and Technology.

Advanced Materials Enabling High-Volume Road Transport Applications of Lightweight Structural Composite Parts

Ignace Verpoest, P. Jacquet, Stepan Vladimirovitch Lomov, 2014 .

The effect of draw ratio on the mechanical properties and crystalline structure of single polymer polypropylene composites

I. Ward, P. Hine, Richard Foster, 2016 .

Characterisation and modelling of polypropylene/carbon nanofibre nanocomposites

I. Ward, P. Hine, Richard Foster, 2009 .

Negative Poisson's ratios in angle-ply laminates

Peter Hine, I. M. Ward, I. Ward, 1997 .

Pyrolysis activation energy of cellulosic fibres investigated by a method derived from the first order global model.

P. Hine, M. Ries, Yunhao Liang, 2022, Carbohydrate polymers.

Modelling of the elastic properties of fibre reinforced composites. I: Orientation measurement

Peter Hine, P. Hine, R. Duckett, 1993 .

Negative thermal expansion of laminates

P. Hine, M. Landert, A. Kelly, 2004 .

CURV™ – A New Lightweight, Recyclable Material for Automotive Applications

I. Ward, P. Hine, M. Bonner, 2002 .

SELF REINFORCED POLYAMIDE 12/CARBON FIBRE HYBRID COMPOSITES

I. Ward, I. Verpoest, P. Hine, 2014 .

The HIVOCOMP project: carbon fibre/PA12 hybrid single polymer composites

I. Ward, I. Verpoest, P. Hine, 2013 .

Toughening of carbon fibre composites by hybridisation with self-reinforced polypropylene

I. Ward, L. Gorbatikh, I. Verpoest, 2013 .

Developing the next generation of single polymer/carbon fibre hybrid composite materials for automotive use - HIVOCOMP

I. Ward, I. Verpoest, P. Hine, 2012 .

Glass fibre orientation within injection moulded automotive pedal: Simulation and experimental studies

B. Whiteside, P. Coates, P. Hine, 2000 .

A study of the fracture behaviour of polyethersulphone

I. Ward, P. Hine, R. Duckett, 1981 .