Lirong Xiao

发表

Effect of Rolling Temperature on the Structural Refinement and Mechanical Properties of Dual-Phase Heterostructured Low-Carbon Steel

Zhiyi Pan, Tao Xu, Bo Gao, 2022, Metals.

Mechanical Properties and Microstructures of Commercial‐Purity Aluminum Processed by Rotational Accelerated Shot Peening Plus Cold Rolling

Y. Liu, Yang Cao, Xuefei Chen, 2019, Advanced Engineering Materials.

Effect of hierarchical precipitates on corrosion behavior of fine-grain magnesium-gadolinium-silver alloy

Ying Han, Lirong Xiao, Hao Zhou, 2021, Corrosion Science.

Dislocation “Bubble-Like-Effect” and the Ambient Temperature Super-plastic Elongation of Body-centred Cubic Single Crystalline Molybdenum

Ze Zhang, Lihua Wang, Xiaodong Han, 2016, Scientific Reports.

Effect of dislocation configuration on Ag segregation in subgrain boundary of a Mg-Ag alloy

Xuefei Chen, Lirong Xiao, Yuntian Zhu, 2021 .

Modification of Eutectic Si in Al-Si-(Ba) Alloy by Inducing a Novel 9R Structure in Twins

Xuefei Chen, Lirong Xiao, Hao Zhou, 2018, Materials.

Ultrastrong low-carbon nanosteel produced by heterostructure and interstitial mediated warm rolling

Xiaolei Wu, Yang Cao, G. Sha, 2020, Science Advances.

Grain size effect on tensile properties and slip systems of pure magnesium

Yang Cao, Lirong Xiao, Yuntian Zhu, 2021 .

Microstructure and anisotropic mechanical behavior of the high-strength and ductility AZ91 Mg alloy processed by hot extrusion and multi-pass RD-ECAP

Lirong Xiao, Hua-nan Liu, Hao Zhou, 2020 .

Enhancing the strain hardening and ductility of Mg-Y alloy by introducing stacking faults

Wei Liu, Yi Liu, Lirong Xiao, 2020 .

Microstructural evolution and mechanical properties of Mg-9.8Gd-2.7Y-0.4Zr alloy produced by repetitive upsetting

Hao Zhou, Qudong Wang, X.L. Ma, 2018, Journal of Materials Science & Technology.

High strength-ductility of heterogeneous sandwich Mg–Y alloys produced by high pressure torsion

Xuefei Chen, Lirong Xiao, Hao Zhou, 2020 .

Mechanical Properties and Microstructure Evolution of Mg-Gd Alloy during Aging Treatment

Bo Gao, Yi Liu, Lirong Xiao, 2021, Metals.

Atomic structure of γ″ phase in Mg–Gd–Y–Ag alloy induced by Ag addition

Xuefei Chen, Lirong Xiao, G. Cheng, 2019, Philosophical Magazine.

Grain Refinement and Aging Hardening of the Mg-10Gd-3Y-2Ag-0.4Zr Alloy Produced by a Two-Step Forming Process

Xuefei Chen, Lirong Xiao, Zehua Yan, 2018, Materials.

Effect of Micro-Steps on Twinning and Interfacial Segregation in Mg-Ag Alloy

Xuefei Chen, Yi Liu, Lirong Xiao, 2019, Materials.

Improving ductility of Ti–6Al–4V alloy via rotational hot rolling

Lirong Xiao, Zhaohua Hu, Hao Zhou, 2021 .

Strengthening and ductilization of laminate dual-phase steels with high martensite content

Xuefei Chen, Lirong Xiao, Yusheng Li, 2021 .

Significant Hetero-Deformation Induced Strain Hardening in a Dual-Phase Low-Carbon Steel

Hao Zhou, Yi Liu, Lirong Xiao, 2022, JOM.

A high-strength heterogeneous structural dual-phase steel

Yang Cao, Yan Ma, Zhiyi Pan, 2019, Journal of Materials Science.

In-situ observation of dislocation dynamics near heterostructured interfaces

Xiaolei Wu, K. Ameyama, H. Höppel, 2019, Materials Research Letters.

Enhanced strength and ductility of the low-carbon steel with heterogeneous lamellar dual-phase structure produced by cyclic intercritical rolling

Yi Liu, Y. Sui, Xuefei Chen, 2023, Journal of Materials Research and Technology.

Transformation plasticity in high strength, ductile ultrafine-grained FeMn alloy processed by heavy ausforming

T. Pardoen, Lirong Xiao, P. Jacques, 2021, International Journal of Plasticity.

Deformation mechanisms of bent Si nanowires governed by the sign and magnitude of strain

J. Zou, Ze Zhang, K. Zheng, 2016 .

Mechanically Driven Grain Boundary Formation in Nickel Nanowires.

J. Zou, Zhigang Chen, Yin Zhang, 2017, ACS nano.

Unexpected high-temperature brittleness of a Mg-Gd-Y-Ag alloy

Hao Zhou, Xuefei Chen, Yi Liu, 2021, Journal of Magnesium and Alloys.

Effect of aging temperature on the hardening behavior and precipitation evolution of Mg 10Gd alloy

Hao Zhou, Y. Sui, Lirong Xiao, 2022, Materials Characterization.

Atomic-scale three-dimensional structural characterisation of twin interface in Mg alloys

Xuefei Chen, Lirong Xiao, Hao Zhou, 2020 .

Reveal the size effect on the plasticity of ultra-small sized Ag nanowires with in situ atomic-scale microscopy

J. Zou, Lihua Wang, Xiaodong Han, 2016 .

Dynamic and atomic-scale understanding of the twin thickness effect on dislocation nucleation and propagation activities by in situ bending of Ni nanowires

Ze Zhang, Lihua Wang, Xiaodong Han, 2015 .

Phase Transformation and Performance of Mg-Based Hydrogen Storage Material by Adding ZnO Nanoparticles

Ronghan Liu, Lirong Xiao, Xueqin Sun, 2023, Nanomaterials.

Recent progress of the effect of Co/Ni/Fe-based containing catalysts addition on hydrogen storage of Mg

Lirong Xiao, Xueqin Sun, Hideo Kimura, 2022, Journal of Materials Science.

Formation mechanism of co-axial grain boundaries in a Mg alloy

Xuefei Chen, Lirong Xiao, Yi Liu, 2022, Journal of Magnesium and Alloys.

Dislocation array reflection enhances strain hardening of a dual-phase heterostructured high-entropy alloy

Xuefei Chen, Lirong Xiao, Yuntian Zhu, 2023, Materials Research Letters.

In-situ TEM investigation on deformation mechanisms of a fine-grained 316L stainless steel

Y. Sui, Xuefei Chen, Lirong Xiao, 2023, Scripta Materialia.

Synthesis of Ionic Liquid-SBA-15 Composite Materials and Their Application for SO2 Capture from Flue Gas

Xue-hui Li, Lirong Xiao, Jinxing Long, 2017 .

Achieving ultrahigh strength by tuning the hierarchical structure of low-carbon martensitic steel

Y. Sui, Xuefei Chen, Lirong Xiao, 2023, Materials Science and Engineering: A.

The formation mechanism of a novel interfacial phase with high thermal stability in a Mg-Gd-Y-Ag-Zr alloy

Qudong Wang, X.L. Ma, Xiaodong Han, 2019, Acta Materialia.

Solute segregation assisted nanocrystallization of a cold-rolled Mg–Ag alloy during annealing

X.L. Ma, B. Ye, Lirong Xiao, 2020 .