Gyeongcheol Choe

发表

Numerical Investigation on Lateral Confinement Effects on Concrete Cracking Induced by Rebar Corrosion

Gyeongcheol Choe, Y. Shinohara, Gyu-Seon Kim, 2020, Materials.

Evaluation of concrete degradation depending on heating conditions by ultrasonic pulse velocity

N. Gucunski, Gyeongcheol Choe, Jeongsoo Nam, 2018 .

Effectiveness of Fiber Reinforcement on the Mechanical Properties and Shrinkage Cracking of Recycled Fine Aggregate Concrete

Gyeongcheol Choe, Gyu-Seon Kim, Jeongsoo Nam, 2016, Materials.

Effect of amorphous metallic fiber on mechanical properties of high-strength concrete exposed to high-temperature

Sangkyu Lee, Gyeongcheol Choe, Jeongsoo Nam, 2019, Construction and Building Materials.

Effects of waste glass sand on the thermal behavior and strength of fly ash and GGBS based alkali activated mortar exposed to elevated temperature

M. Hadzima-Nyarko, Gyeongcheol Choe, Gyu-Seon Kim, 2022, Construction and Building Materials.

Effects of strain rate on the tensile behavior of cementitious composites made with amorphous metallic fiber

V. Mechtcherine, T. Noguchi, Sangkyu Lee, 2020 .

Direct tensile behavior of amorphous metallic fiber-reinforced cementitious composites: Effect of fiber length, fiber volume fraction, and strain rate

T. Noguchi, Sangkyu Lee, Gyeongcheol Choe, 2019, Composites Part B: Engineering.

Explosive Spalling Behavior of Single-Sided Heated Concrete According to Compressive Strength and Heating Rate

Gyeongcheol Choe, Gyu-Seon Kim, Jeongsoo Nam, 2021, Materials.

Influence of amorphous metallic fibers on spalling properties of high-strength concrete exposed to high temperature

Sangkyu Lee, Gyeongcheol Choe, Gyu-Seon Kim, 2020 .

Effect of Mass Loss of Organic Fiber on the Water Vapor Pressure and Moisture Migration of 150 and 200 MPa Ultra-High Strength Concrete Exposed to High Temperature

Sangkyu Lee, Gyeongcheol Choe, Gyu-Seon Kim, 2020, Journal of Advanced Concrete Technology.

Examination of Strain Model Constants considering Strain Properties at High Temperature of Ultra-high-strength Concrete

Gyeongcheol Choe, Bokyeong Lee, Gyu-Yong Kim, 2016 .

Evaluation of the mechanical properties of 200 MPa ultra-high-strength concrete at elevated temperatures and residual strength of column

N. Gucunski, Gyeongcheol Choe, Gyu-Yong Kim, 2015 .

Evaluation of Properties of 80, 130, 180 MPa High Strength Concrete at High Temperature with Heating and Loading

Gyeongcheol Choe, Gyu-Yong Kim, Min-ho Yoon, 2013 .

Evaluation of Spalling Property and Water Vapor Pressure of Concrete with Heating Rate

Gyeongcheol Choe, Jeongsoo Nam, Gyu-Yong Kim, 2012 .

Evaluation on Spalling Properties of Ultra High Strength Concrete with Melting and Vaporization of Fiber

Gyeongcheol Choe, Gyu-Yong Kim, Seung-Hoon Lee, 2012 .

Effect of Red Mud Content on Strength and Efflorescence in Pavement using Alkali-Activated Slag Cement

Gyeongcheol Choe, Suk-Pyo Kang, Kim Hyeok-Jung, 2018, International Journal of Concrete Structures and Materials.

Concrete Corrosion Cracking and Transverse Bar Strain Behavior in a Reinforced Concrete Column under Simulated Marine Conditions

Sangkyu Lee, Gyeongcheol Choe, Y. Shinohara, 2020, Applied Sciences.

Mechanical Properties of Concrete Containing Liquefied Red Mud Subjected to Uniaxial Compression Loads

Gyeongcheol Choe, Sukpyo Kang, Hyeju Kang, 2020, Materials.

Characterization of Slag Cement Mortar Containing Nonthermally Treated Dried Red Mud

Gyeongcheol Choe, Suk-Pyo Kang, Hye-Ju Kang, 2019, Applied Sciences.

Strain rate effects on the compressive and tensile behavior of bundle-type polyamide fiber-reinforced cementitious composites

Sangkyu Lee, Gyeongcheol Choe, Jeongsoo Nam, 2019, Composites Part B: Engineering.

Effect of coarse aggregate type and loading level on the high temperature properties of concrete

Gyeongcheol Choe, Min-ho Yoon, Taegyu Lee, 2015 .

Effect of Elevated Temperature on Meso- and Micro-Structure and Compressive Strength of High-Strength Concrete and Mortar Containing Blast-Furnace Slag

S. Sawada, Gyeongcheol Choe, Norichika Kakae, 2018 .

Effect of Injecting Epoxy Resin Adhesive into Cement Mortar on Tile Adhesion Performance

Sangkyu Lee, Gyeongcheol Choe, Jeongsoo Nam, 2020, Applied Sciences.

Spalling Resistance of Fiber-Reinforced Ultra-High-Strength Concrete Subjected to the ISO-834 Standard Fire Curve: Effects of Thermal Strain and Water Vapor Pressure

Gyeongcheol Choe, Gyu-Seon Kim, Jeongsoo Nam, 2020, Materials.

Direct Tensile Properties of Fiber-Reinforced Cement Based Composites according to the Length and Volume Fraction of Amorphous Metallic Fiber

Sangkyu Lee, Gyeongcheol Choe, Jeongsoo Nam, 2019 .

Effect of Red Mud Content on Strength and Efflorescence in Pavement using Alkali-Activated Slag Cement

Gyeongcheol Choe, Suk-Pyo Kang, Kim Hyeok-Jung, 2018 .

Mechanical Properties of Concrete depending on Cooling Conditions After High Temperature Heating

Gyeongcheol Choe, Taegyu Lee, Gyuyong Kim, 2014 .

An Experimental Study on the Mechanical Properties of Concrete with High Temperatures and Cooling Conditions

Gyeongcheol Choe, Min-ho Yoon, Taegyu Lee, 2012 .

Strain Behavior of Concrete Panels Subjected to Different Nose Shapes of Projectile Impact

Sangkyu Lee, Gyeongcheol Choe, Gyu-Seon Kim, 2018, Materials.

Effect of moisture migration and water vapor pressure build-up with the heating rate on concrete spalling type

Gyu-Yong Kim, Jeongsoo Nam, Gyeongcheol Choe, 2019, Cement and Concrete Research.

Mechanical properties of light weight concrete at elevated temperature

Gyeongcheol Choe, Min-ho Yoon, Taegyu Lee, 2015 .

Crack Evaluation of Concrete Using Mechanochromic Sensor

Myeongkyu Lee, Gyeongcheol Choe, Gyu-Seon Kim, 2023, Materials.

Compressive Creep and Shrinkage of High-Strength Concrete Based on Limestone Coarse Aggregate Applied to High-Rise Buildings

Gyeongcheol Choe, Gyu-Seon Kim, Jeongsoo Nam, 2021, Materials.