S. Das

发表

Additive Manufacturing of Nickel‐Base Superalloy René N5 through Scanning Laser Epitaxy (SLE) − Material Processing, Microstructures, and Microhardness Properties

A. Basak, S. Das, 2017 .

Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization

Amrita Basak, Suman Das, Ranadip Acharya, 2016, Metallurgical and Materials Transactions A.

Epitaxy and Microstructure Evolution in Metal Additive Manufacturing

Amrita Basak, Suman Das, A. Basak, 2016 .

A Microstructure Evolution Model for the Processing of Single-Crystal Alloy CMSX-4 Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair (Part II)

Suman Das, Ranadip Acharya, Rohan Bansal, 2014, Metallurgical and Materials Transactions B.

Erratum to: A Coupled Thermal, Fluid Flow, and Solidification Model for the Processing of Single-Crystal Alloy CMSX-4 Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair (Part I)

Suman Das, Ranadip Acharya, Rohan Bansal, 2014, Metallurgical and Materials Transactions B.

Tribology of electroless nickel coatings – A review

P. Sahoo, S. Das, 2011 .

Processing and properties of glass bead particulate-filled functionally graded Nylon-11 composites produced by selective laser sintering

S. Das, Haseung Chung, 2006 .

Physical Aspects of Process Control in Selective Laser Sintering of Metals

S. Das, 2003 .

Processing of titanium net shapes by SLS/HIP

J. Beaman, D. Bourell, S. Das, 1999 .

Photopolymerization of powder suspensions for shaping ceramics

J. Halloran, S. Das, Tao Wu, 2011 .

Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering

Suman Das, S. Das, K. Kalaitzidou, 2010 .

Metallic materials for 3D printing

David L. Bourell, Suman Das, D. Bourell, 2016 .

3.3 Surface Finish Coatings

P. Sahoo, S. Das, J. P. Davim, 2017 .

Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering.

Colleen L Flanagan, Scott J Hollister, Stephen E Feinberg, 2005, Biomaterials.

Selective Laser Sintering of High Performance High Temperature Materials

J. Beaman, D. Bourell, S. Das, 1996 .

Wafer-scale high-throughput ordered growth of vertically aligned ZnO nanowire arrays.

Wenzhuo Wu, Suman Das, Yaguang Wei, 2010, Nano letters.

Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering.

Shaun Eshraghi, Suman Das, S. Das, 2010, Acta biomaterialia.

Direct laser freeform fabrication of high performance metal components

David L. Bourell, Suman Das, D. Bourell, 1998 .

Tissue Engineered Bone Using Polycaprolactone Scaffolds Made by Selective Laser Sintering

S. Hollister, C. Flanagan, P. Krebsbach, 2004 .

Characteristics and damage mechanisms of bending fretting fatigue of materials

Quazi Md. Zobaer Shah, Md. Arefin Kowser, M. Chowdhury, 2018 .

Hardness, Friction and Wear Trends of Electroless Ni-W-P Coating Heat-Treated at Different Temperatures

P. Sahoo, A. Biswas, S. Das, 2018, Lecture Notes on Multidisciplinary Industrial Engineering.

Investigation of the tribological behavior of electroless Ni-W-P coating pre and post phase transformation regime

P. Sahoo, A. Biswas, S. Das, 2019, Materials Research Express.

Mechanical and Microstructural Properties of Polycaprolactone Scaffolds with 1-D , 2-D , and 3-D Orthogonally Oriented Porous Architectures Produced by Selective Laser Sintering

S. Das, Shaun Eshraghi, 2010 .

Processing and properties of electrically conductive nanocomposites based on polyamide-12 filled with exfoliated graphite nanoplatelets prepared by selective laser sintering

S. Das, K. Kalaitzidou, M. Karevan, 2013 .

Microarchitectured solid oxide fuel cells with improved energy efficiency (Part II): Fabrication and characterization

Meilin Liu, Meilin Liu, S. Das, 2015 .

On Some Physical Aspects of Process Control in Direct Selective Laser Sintering of Metals Part I 85

S. Das, 2001 .

Photopatterneable Block Co-Polymers for Laser Interference Lithography

S. Das, Dajun Yuan, T. R. Alabi, 2012 .

Influence of Alumina Particles on Tribology of Autocatalytic Ni-P Coatings at High Temperature

P. Sahoo, S. Das, S. Kundu, 2021 .

Properties of Electroless Nickel at Elevated Temperature-a Review☆

P. Sahoo, S. Das, S. Kundu, 2014 .

Correlating tribological performance with phase transformation behavior for electroless Ni-(high)P coating

P. Sahoo, A. Biswas, S. Das, 2017 .

Wear Performance Optimization for Electroless Ni-P Coating

P. Sahoo, S. Das, 2015 .

Microstructure of nickel-base superalloy MAR-M247 additively manufactured through scanning laser epitaxy (SLE)

A. Basak, S. Das, 2017 .

Geometry Processing for SLSIHIP

J. Beaman, S. Das, R. Venkataramani, 2008 .

Effect of processing method on the properties of multifunctional exfoliated graphite nanoplatelets/polyamide 12 composites

R. Gerhardt, S. Das, K. Kalaitzidou, 2013 .

Characterization of MARM 247 Deposits Fabricated through Scanning Laser Epitaxy ( SLE )

G. Woodruff, A. Basak, S. Das, 2017 .

An investigation of the failure of low pressure steam turbine blades

D. K. Bhattacharya, N. Mukhopadhyay, S. Das, 1998 .

Fabrication of gold nanostructures through pulsed laser interference patterning

S. Das, Ranadip Acharya, Dajun Yuan, 2013 .

Powder densification maps in selective Laser Sintering

J. Beaman, D. Bourell, S. Das, 2002 .

Silicon oxide nanowires: facile and controlled large area fabrication of vertically oriented silicon oxide nanowires for photoluminescence and sensor applications.

D. Bucknall, S. Das, Dajun Yuan, 2013, ACS applied materials & interfaces.

Friction and Wear Characteristics of Heat Treated Electroless Ni–P–W Coatings Under Elevated Temperature

P. Sahoo, S. Das, Sanjib Kundu, 2018, Lecture Notes on Multidisciplinary Industrial Engineering.

Direct laser interference patterning of poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) (PEDOT-PSS) thin films

Andrés Fabián Lasagni, Suman Das, David C. Martin, 2009 .

Layer‐by‐Layer Interference Lithography of Three‐dimensional Microstructures in SU‐8

Andrés Fabián Lasagni, Suman Das, Dajun Yuan, 2009 .

3D printing of biomaterials

Suman Das, Amit Bandyopadhyay, Susmita Bose, 2015 .

Oxidation issues during heat treatment and effect on the tribo-mechanical performance of electroless Ni-P–Cu deposits

P. Sahoo, A. Biswas, S. Das, 2021, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

Effect of copper incorporation on phase transformation behavior of electroless nickel–phosphorous coating and its effect on the tribological behavior

P. Sahoo, A. Biswas, S. Das, 2021 .

A comparative study in microstructural and tribological aspects of phosphorus enriched electroless Ni-P and Ni-P-Cu coating

P. Sahoo, A. Biswas, S. Das, 2019, Materials Today: Proceedings.

Optimization Studies on Electroless Nickel Coatings: A Review

Prasanta Sahoo, Sanjib Kundu, Suman Kalyan Das, 2014, Int. J. Manuf. Mater. Mech. Eng..

Friction and wear behavior of electroless Ni-P-W coating exposed to elevated temperature

P. Sahoo, S. Das, Sanjib Kundu, 2019, Surfaces and Interfaces.

Tribological characteristics of electroless Ni–B coating and optimization of coating parameters using Taguchi based grey relational analysis

P. Sahoo, S. Das, 2011 .

Selective Laser Sintering of Polycaprolactone Bone Tissue Engineering Scaffolds

S. Hollister, S. Das, B. Partee, 2004 .

Micromechanical finite-element modeling and experimental characterization of the compressive mechanical properties of polycaprolactone-hydroxyapatite composite scaffolds prepared by selective laser sintering for bone tissue engineering.

Shaun Eshraghi, Suman Das, S. Das, 2012, Acta biomaterialia.

Tribology of materials for biomedical applications

J. Paulo Davim, Suman Das, Prasanta Sahoo, 2019, Mechanical Behaviour of Biomaterials.

Tribological performance of electroless Ni-(high) P coatings under elevated testing temperature

P. Sahoo, S. Das, Sanjib Kundu, 2017 .

Effect of Process Parameters on Force Trends During Friction Stir Welding of AISI-316L Pipes

S. Das, S. Acharyya, D. Sanyal, 2020, Advances in Thermal Engineering, Manufacturing, and Production Management.

Hot corrosion of glass coating on nickel base superalloy

S. Das, S. Datta, D. Basu, 2008 .

Additive Manufacturing of IN100 Superalloy Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair: Process Development, Modeling, Microstructural Characterization, and Process Control

S. Das, Ranadip Acharya, 2015, Metallurgical and Materials Transactions A.

Additive Manufacturing and Characterization of René 80 Superalloy Processed Through Scanning Laser Epitaxy for Turbine Engine Hot‐Section Component Repair

N. Rudawski, S. Das, Ranadip Acharya, 2015 .

Microstructures and Microhardness Properties of CMSX-4® Additively Fabricated Through Scanning Laser Epitaxy (SLE)

A. Basak, S. Das, Shashank Holenarasipura Raghu, 2017, Journal of Materials Engineering and Performance.

Friction stir welding of industrial grade AISI 316L and P91 steel pipes: A comparative investigation based on mechanical and metallurgical properties

S. Das, S. Acharyya, D. Sanyal, 2023, International Journal of Pressure Vessels and Piping.

Experimental and theoretical analysis of direct-write laser micromachining of polymethyl methacrylate by CO2 laser ablation

Suman Das, Dajun Yuan, S. Das, 2007 .

Functionally graded Nylon-11/silica nanocomposites produced by selective laser sintering

Haseung Chung, Suman Das, S. Das, 2008 .

The fabrication of vertically aligned and periodically distributed carbon nanotube bundles and periodically porous carbon nanotube films through a combination of laser interference ablation and metal-catalyzed chemical vapor deposition

Wei Lin, C. Wong, S. Das, 2012, Nanotechnology.

Selective laser sintering process optimization for layered manufacturing of CAPA® 6501 polycaprolactone bone tissue engineering scaffolds

Suman Das, Scott J. Hollister, Brock Partee, 2006 .

A Study on the Effects of Substrate Crystallographic Orientation on Microstructural Characteristics of René N5 Processed through Scanning Laser Epitaxy

A. Basak, S. Das, 2016 .

Microstructural Characterization of MARM 247 Fabricated Through Scanning Laser Epitaxy

G. Woodruff, A. Basak, S. Das, 2016 .

A Coupled Thermal, Fluid Flow, and Solidification Model for the Processing of Single-Crystal Alloy CMSX-4 Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair (Part I)

Suman Das, Ranadip Acharya, Rohan Bansal, 2014, Metallurgical and Materials Transactions B.

Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding

Suman Das, S. Das, K. Kalaitzidou, 2011 .

Epitaxial deposition of nickel-based superalloy René 142 through scanning laser epitaxy (SLE)

A. Basak, S. Das, Ranadip Acharya, 2018 .

Effect of Heat Treatment on the Microstructures of CMSX-4 Processed through Scanning Laser Epitaxy (SLE)

G. Woodruff, A. Basak, S. Das, 2017 .

Effects of Processing Parameters on the Mechanical Properties of CMSX-4 Additively Fabricated through Scanning Laser Epitaxy (SLE)

G. Woodruff, A. Basak, S. Das, 2017 .

Carbide Formation in Nickel-Base Superalloy MARM 247 Processed Through Scanning Laser Epitaxy ( SLE )

G. Woodruff, A. Basak, S. Das, 2016 .

Estimation of the friction coefficient in turning process of metals through model experiment

M. Chowdhury, S. Das, U. K. Debnath, 2018 .

Synthesis and characterization of mixed phase manganese ferrite and hausmannite magnetic nanoparticle as potential adsorbent for methyl orange from aqueous media: Artificial neural network modeling

Biswajit Saha, Kalyan Kumar Chattopadhyay, Animesh Debnath, 2016 .

Direct Selective Laser Sintering of high performance metals for containerless HIP

David L. Bourell, Joseph J. Beaman, Suman Das, 1997 .

Large-area microlens arrays fabricated on flexible polycarbonate sheets via single-step laser interference ablation

Suman Das, Dajun Yuan, S. Das, 2010 .

Tribological Behaviour of Electroless Ni-P Deposits Under Elevated Temperature

P. Sahoo, S. Das, Sanjib Kundu, 2018, Silicon.

Duplex electroless Ni-P/Ni-Cu-P coatings: Preparation, evaluation of microhardness, friction, wear, and corrosion performance

S. Das, P. Biswas, P. Sahoo, 2022, Journal of Electrochemical Science and Engineering.

Tribological Behavior of Electroless Ni–P Coating in Brine Environment

P. Sahoo, S. Das, B. Panja, 2014, Journal of The Institution of Engineers (India): Series D.

TRIBOLOGICAL BEHAVIOR OF ELECTROLESS Ni–P COATINGS IN VARIOUS CORROSIVE ENVIRONMENTS

P. Sahoo, S. Das, B. Panja, 2016 .

Computational Design, Freeform Fabrication and Testing of Nylon-6 Tissue Engineering Scaffolds

Scott J. Hollister, Colleen L. Flanagan, Suman Das, 2002 .

Hierarchical metallic and ceramic nanostructures from laser interference ablation and block copolymer phase separation.

S. Das, Dajun Yuan, T. R. Alabi, 2013, Nanoscale.

Freeform fabrication of Nylon‐6 tissue engineering scaffolds

Scott J. Hollister, Colleen L. Flanagan, Suman Das, 2003 .

Electrochemical Impedance Spectroscopy of Ni-B Coatings and Optimization by Taguchi Method and Grey Relational Analysis

P. Sahoo, S. Das, 2011 .

Wear Performance Optimization of Electroless Ni-B Coating Using Taguchi Design of Experiments

P. Sahoo, S. Das, 2010 .

Friction Stir Welding

P. Sahoo, S. Das, S. Gain, 2021, Welding Technology.

Selective Laser Sintering of Polymers and Polymer-Ceramic Composites

S. Das, 2008 .

The fabrication of high aspect ratio carbon nanotube arrays by direct laser interference patterning

A. Lasagni, S. Graham, S. Das, 2009, Nanotechnology.

Tribological behavior of autocatalytic Ni–P–B coatings at elevated temperatures

P. Sahoo, S. Das, Sanjib Kundu, 2019, Applied Physics A.

Tribological behavior of electroless Ni–B coating

P. Sahoo, S. Das, S. Kalyan Das, 2021 .

Corrosion and Wear Behavior of Electroless Nickel Coatings

Supriyo Roy, P. Sahoo, S. Das, 2020 .

Electroless Nickel-Phosphorus Deposits

P. Sahoo, S. Das, 2019, Electroless Nickel Plating.

Tribological behavior of autocatalytic Ni–P–B coatings at elevated temperatures

S. Das, Sanjib Kundu, P. Sahoo, 2019, Applied Physics A.

Study of Potentiodynamic Polarization Behaviour of Electroless Ni-B Coatings and Optimization using Taguchi Method and Grey Relational Analysis

P. Sahoo, S. Das, 2011 .

A parametric investigation of high temperature friction performance of electroless Ni-P deposits

P. Sahoo, S. Das, Sanjib Kundu, 2018 .

Microstructure, thermomechanical properties, and electrical conductivity of carbon black‐filled nylon‐12 nanocomposites prepared by selective laser sintering

S. Das, K. Kalaitzidou, S. Athreya, 2012 .

A parametric investigation of the friction performance of electroless Ni‐B coatings

P. Sahoo, S. Das, 2011 .

Direct laser fabrication of superalloy cermet abrasive turbine blade tips

David L. Bourell, Joseph J. Beaman, Suman Das, 2000 .

Thermal cyclic behavior of glass―ceramic bonded thermal barrier coating on nimonic alloy substrate

S. Das, S. Datta, D. Basu, 2009 .

Additive Manufacturing of Nickel-Base Superalloy IN100 Through Scanning Laser Epitaxy

A. Basak, S. Das, 2017 .

Direct‐write deposition of fine powders through miniature hopper‐nozzles for multi‐material solid freeform fabrication

Pranav Kumar, Suman Das, P. Kumar, 2004 .

Heteroepitaxial Patterned Growth of Vertically Aligned and Periodically Distributed ZnO Nanowires on GaN Using Laser Interference Ablation

Yong Ding, Wenzhuo Wu, Suman Das, 2010 .

Periodic Micropatterning of Polyethylene Glycol Diacrylate Hydrogel by Laser Interference Lithography Using Nano‐ and Femtosecond Pulsed Lasers

Suman Das, Dajun Yuan, A. Lasagni, 2009 .

Direct periodic patterning of GaN-based light-emitting diodes by three-beam interference laser ablation

Theeradetch Detchprohm, Russell D. Dupuis, Min-Ki Kwon, 2014 .

Hard glass-ceramic coating by microwave processing

S. Das, A. Mukhopadhyay, S. Datta, 2008 .

Rapid fabrication of pentaerythritol triacrylate periodic structures on large areas by laser interference patterning with nanosecond pulses

A. Lasagni, S. Das, Dajun Yuan, 2009 .

Producing metal parts with selective laser sintering/hot isostatic pressing

J. Beaman, D. Bourell, S. Das, 1998 .

Evaluation of microwave processed glass–ceramic coating on nimonic superalloy substrate

A. Mukhopadhyay, S. Datta, D. Basu, 2010 .

Aluminium Oxide Coating by Microwave Processing

S. Das, A. Mukhopadhyay, S. Datta, 2006 .

Deposition of Duplex and Multilayer Electroless Ni–P/Ni–B Coating and Study of Their Wear Resistance

P. Sahoo, S. Das, P. Biswas, 2020, Advances in Thermal Engineering, Manufacturing, and Production Management.

Scaling Laws for Melting and Resolidification in Direct Selective Laser Sintering of Metals 322

Haseung Chung, Suman Das, S. Das, 2002 .

Rapid fabrication of biocompatible hydrogels microdevices using laser interference lithography

Peng Shao, Suman Das, Dajun Yuan, 2009, Microtechnologies.

Direct fabrication of periodic patterns with hierarchical sub-wavelength structures on poly(3,4-ethylene dioxythiophene)–poly(styrene sulfonate) thin films using femtosecond laser interference patterning

Andrés Fabián Lasagni, Suman Das, David C. Martin, 2010 .

Direct Laser Fabrication of a Gas Turbine Engine Component - Microstructure and Properties - Part I

David L. Bourell, Joseph J. Beaman, Suman Das, 1998 .

Fabrication of patterned polymer nanowire arrays.

Suman Das, Dajun Yuan, Zhong Lin Wang, 2011, ACS nano.

Hierarchical Metallic and Ceramic Nanostructures Produced via a Hybrid Approach Combining Laser Interference Ablation and Block Co-Polymer Phase Separation

S. Das, Dajun Yuan, T. R. Alabi, 2012 .

Roughness Optimization of Electroless Ni-B Coatings Using Taguchi Method

Prasanta Sahoo, Suman Kalyan Das, P. Sahoo, 2011, Int. J. Manuf. Mater. Mech. Eng..

Influence of Process Parameters on Microhardness of Electroless Ni-B Coatings

P. Sahoo, S. Das, 2012 .

Fractal characterisation of electroless Ni-B coating and optimisation of coating parameters

P. Sahoo, S. Das, 2011 .

Rapid prototyping of microstructured hydrogels via laser direct-write and laser interference photopolymerisation

A. Lasagni, S. Das, Dajun Yuan, 2008 .

CHARACTERIZATION OF SHRINKAGE AND STRESSES IN LARGE AREA MASKLESS PHOTOPOLYMERIZATION

S. Das, Dajun Yuan, Peng Shao, 2009 .

Computational Modeling and Experimental Validation of Microstructure Development in Nickel‐Base Superalloys Processed through Scanning Laser Epitaxy (SLE)

S. Das, Ranadip Acharya, R. Bansal, 2013 .

Numerical modeling of scanning laser-induced melting, vaporization and resolidification in metals subjected to step heat flux input

Haseung Chung, Suman Das, S. Das, 2004 .

Manufacture of complex ceramics by photopolymerization

J. Halloran, C. Bae, S. Das, 2008 .

Design of a High Temperature Workstation for the Selective Laser Sintering Process

J. Beaman, Benny Wu, S. Das, 1991 .

Patterning of periodic nano-cavities on PEDOT–PSS using nanosphere-assisted near-field optical enhancement and laser interference lithography

David C. Martin, A. Lasagni, J. Hendricks, 2012, Nanotechnology.

Rapid Prototyping of PEM Fuel Cell Bi-Polar Plates using 3D Printing and Thermal Spray Deposition

S. Das, B. Lyons, M. Batalov, 2005 .

Processing and properties of electrically conductive nanocomposites based on polyamide-12 filled with exfoliated graphite nanoplatelets prepared by selective laser sintering

S. Das, K. Kalaitzidou, M. Karevan, 2013, International Journal of Precision Engineering and Manufacturing.

S. Das, Shaun Eshraghi, 2012, Acta biomaterialia.