I. Pundienė

I. Pundienė, J. Pranckevičienė, M. Kligys, 2019, The proceedings of the 13th international conference "Modern Building Materials, Structures and Techniques" (MBMST 2019).

The effect of multi-walled carbon nanotubes on the rheological properties and hydration process of cement pastes

I. Pundienė, J. Pranckevičienė, M. Kligys, 2018, Construction and Building Materials.

The influence of carbon nanotubes on the properties of water solutions and fresh cement pastes

M. Sinica, I. Pundienė, J. Pranckevičienė, 2017 .

The Effect of Silica Fume Addition on the Resistance of Concrete to Alkali Silica Reaction

D. Nagrockienė, I. Pundienė, A. Rutkauskas, 2019, IOP Conference Series: Materials Science and Engineering.

Investigation of Peculiarities in the Hardening Process of Portland Cements with Active Additives out of Waste

V. Antonovič, I. Pundienė, Jadvyga Žvironaitė, 2011 .

The influence of hybrid deflocculant on hardening process of refractory MCC-type castable

V. Antonovič, I. Pundienė, R. Stonys, 2010 .

Impact of reactive SiO2/Al2O3 ratio in precursor on durability of porous alkali activated materials

D. Bajare, G. Bumanis, I. Pundienė, 2017 .

Effects of Na2CO3/Na2SiO3 Ratio and Curing Temperature on the Structure Formation of Alkali-Activated High-Carbon Biomass Fly Ash Pastes

I. Pundienė, J. Pranckevičienė, M. Kligys, 2022, Materials.

Impact of hemp shives aggregate mineralization on physical–mechanical properties and structure of composite with cementitious binding material

A. Korjakins, I. Pundienė, Sigitas Vėjelis, 2015 .

The Impact of the Amount of Water Used in Activation Solution and the Initial Temperature of Paste on the Rheological Behaviour and Structural Evolution of Metakaolin-Based Geopolymer Pastes

D. Bajare, I. Pundienė, J. Pranckevičienė, 2020 .

The workability kinetics of phosphogypsum binder

D. Bajare, G. Bumanis, I. Pundienė, 2019 .

Effect of Pozzolanic Additives on the Strength Development of High Performance Concrete

D. Bajare, I. Pundienė, L. Vitola, 2016 .

Synergistic effect of dry sludge from waste wash water of concrete plants and zeolitic by-product on the properties of ternary blended ordinary Portland cements

I. Pundienė, D. Vaičiukynienė, A. Kantautas, 2020 .

Investigating the hydration of deflocculated calcium aluminate cement-based binder with catalyst waste

V. Antonovič, J. Kerienė, Marius Aleknevičius, 2012, Journal of Thermal Analysis and Calorimetry.

Long-term curing impact on properties, mineral composition and microstructure of hemp shive-cement composite

R. Boris, I. Pundienė, A. Kairytė, 2018, Construction and Building Materials.

Flexural Behavior of Reinforced Concrete Beams Strengthened by Textile Reinforced Magnesium Potassium Phosphate Cement Mortar

I. Pundienė, Jia-jian Chen, P. Ng, 2020, Frontiers in Materials.

Use of Magnesium Silicate Contaminated with Organic Compounds in Ceramic Materials as a Pore Modifier

I. Pundienė, J. Pranckevičienė, 2022, Materials.

Moisture-mechanical performance improvement of thermal insulating polyurethane using paper production waste particles grafted with different coupling agents

I. Pundienė, A. Kairytė, S. Vaitkus, 2019, Construction and Building Materials.

Effect of propylene glycol, rapeseed glycerine, and corn starch modified polyol blends parameters on the properties of thermal insulating polyurethane foams

I. Pundienė, A. Kairytė, S. Vaitkus, 2019, Journal of Cellular Plastics.

A review of the possible applications of nanotechnology in refractory concrete

Ina Pundiene, Valentin Antonovič, V. Antonovič, 2010 .

The influence of calcium nitrate on setting and hardening rate of Portland cement concrete at different temperatures

I. Pundienė, G. Skripkiūnas, A. Kičaitė, 2017 .

Impact of different types of plasticizing admixtures on the rheological properties and hydration of blended cements

I. Pundienė, J. Pranckevičienė, A. Kičaitė, 2016, Journal of Thermal Analysis and Calorimetry.

Cleaner production of polyurethane foam: Replacement of conventional raw materials, assessment of fire resistance and environmental impact

U. Cabulis, I. Pundienė, A. Kairytė, 2018 .

Effect of Calcium Nitrate on the Properties of Portland–Limestone Cement-Based Concrete Cured at Low Temperature

I. Pundienė, H. Justnes, G. Skripkiūnas, 2021, Materials.

The role of temperature and activator solution molarity on the viscosity and hard structure formation of geopolymer pastes

I. Pundienė, J. Pranckevičienė, M. Kligys, 2020 .

Lightweight Ceramics with Admixtures of Mineral-Wool Production Waste and Aluminum Silicate Cenospheres of Various Fractions

I. Pundienė, J. Pranckevičienė, 2022, Glass and Ceramics.

Study of the Course of Cement Hydration in the Presence of Waste Metal Particles and Pozzolanic Additives

I. Pundienė, J. Pranckevičienė, M. Kligys, 2022, Materials.

A Study of Rapeseed Oil-Based Polyol Substitution with Bio-based Products to Obtain Dimensionally and Structurally Stable Rigid Polyurethane Foam

I. Pundienė, A. Kairytė, S. Vaitkus, 2018, Journal of Polymers and the Environment.

Impact of municipal solid waste incineration bottom ash on the properties and frost resistance of clay bricks

O. Kizinievič, V. Kizinievič, V. Voišnienė, 2021, Journal of Material Cycles and Waste Management.

The synergistic effect of adding a blend of deflocculants and microsilica on the properties of high temperature resistant lightweight concrete with cenospheres

I. Pundienė, J. Pranckevičienė, 2020 .

Effect of silicon carbide aggregate, prepared by different methods, on the properties of refractory concrete with cenospheres

A. Korjakins, I. Pundienė, J. Pranckevičienė, 2018, Ceramics International.

Effect of SiC-Filler Refinement by Different Methods on Heat-Resistant Medium-Cement Concrete Properties

I. Pundienė, I. Prantskevichene, A. Kairite, 2018, Refractories and Industrial Ceramics.

Alkali-Activated Aluminium-Silicate Composites as Insulation Materials for Industrial Application

D. Bajare, G. Bumanis, I. Pundienė, 2015 .

Assessment of Plant Origin By-Products as Lightweight Aggregates for Bio-Composite Bounded by Starch Binder

D. Bajare, S. Gendelis, I. Pundienė, 2022, Energies.

Study of the Effect of Replacing Microsilica in Heat-Resistant Concrete with Additive based on Metakaolin

I. Pundienė, E. Spudulis, V. Antonoviè, 2013, Refractories and Industrial Ceramics.

Effect of a Mixture of Different Types of Deflocculants on the Structure and Properties of Cement Rock and Castable Refractories

I. Pundienė, J. Pranckevičienė, M. Kligys, 2017, Glass and Ceramics.

The Effect of Mechanical Activation of Fly Ash on Cement-Based Materials Hydration and Hardened State Properties

I. Pundienė, J. Pranckevičienė, K. Akmalaiuly, 2023, Materials.

Effect of Amount of Deflocculant on Change in Physicomechanical Properties of Medium-Cement Heat-Resistant Concretes During Drying and Heat Treatment

I. Pundienė, I. Demidova-Buizinene, 2014, Refractories and Industrial Ceramics.

The impact of expanded polystyrene waste of different fineness on the properties of lightweight composite

I. Pundienė, J. Pranckevičienė, M. Kligys, 2019, IOP Conference Series: Materials Science and Engineering.

Influence of alkaline activator solution ratio on the properties of biomass fly ash-based alkali-activated materials

A. Korjakins, I. Pundienė, J. Pranckevičienė, 2023, Journal of Physics: Conference Series.

High-Temperature, Lightweight, Alkali-Activated Materials with Multi-Walled Carbon Nanotubes as Additives

I. Pundienė, J. Pranckevičienė, M. Kligys, 2023, Glass and Ceramics.

Effect of Molarity and Temperature of Alkaline Activator Solution on the Rheological Properties and Structure Formation of Alkali-Activated Refractory Materials

I. Pundienė, Ch. Zhu, I. Pranckeviciene, 2020, Glass and Ceramics.

The Lightweight Porous Fine Aggregate Composite Based on Secondary Raw Materials

I. Pundienė, J. Pranckevičienė, M. Kligys, 2019, Key Engineering Materials.

The Influence of Concrete Sludge from Residual Concrete on Fresh and Hardened Cement Paste Properties

D. Nagrockienė, I. Pundienė, E. Pocius, 2023, Materials.

Effect of Adding Cenospheres on Heat-Resistant Lightweight Concrete Properties

I. Pundienė, G. Girskas, I. Prantskevichene, 2019, Refractories and Industrial Ceramics.

Portland Cement Based Lightweight Multifunctional Matrix with Different Kind of Additives Containing SiO2

I. Pundienė, M. Kligys, J. Šeputytė-Jucikė, 2014 .

A Study of Metal-Cement Composites with Additives

I. Pundienė, A. Tatarinov, V. Mironov, 2014 .

STUDIES ON THE INFLUENCE OF ALUMINOSILICATE ADDITIVE ON INITIATION STEPS OF HIGH CALCIUM ALUMINATE CEMENT HYDRATION

ska, Marius Aleknevičius, I. Pundienė, 2002 .

Effect of Mechanically Activated Nepheline-Syenite Additive on the Physical–Mechanical Properties and Frost Resistance of Ceramic Materials Composed of Illite Clay and Mineral Wool Waste

I. Pundienė, J. Pranckevičienė, 2023, Materials.

The Impact of High-Alkali Biofuel Fly Ash on the Sustainability Parameters of Concrete

D. Nagrockienė, I. Pundienė, Loreta Kanapeckiene, 2023, Buildings.

A Review of Biomass Wood Ash in Alkali-Activated Materials: Treatment, Application, and Outlook

A. Korjakins, I. Pundienė, J. Pranckevičienė, 2024, Journal of Composites Science.

The Effect of Natural and Synthesised Zeolites on Cement-Based Materials Hydration and Hardened State Properties

I. Pundienė, J. Pranckevičienė, G. Girskas, 2023, Materials.