Le Gao

发表

Three-dimensional printing of a tunable graphene-based elastomer for strain sensors with ultrahigh sensitivity

Kai Huang, S. Dong, Jinshan Yang, 2019, Carbon.

ZrB2–SiC Oxidation Protective Coating on C/C Composites Prepared by Vapor Silicon Infiltration Process

S. Dong, Le Gao, Zhen Wang, 2010 .

Damage development of a woven SiCf/SiC composite during multi-step fatigue tests at room temperature

Qin Shan, Long Li, S. Dong, 2020 .

Synthesis of carbon nanotubes on carbon fibers by modified chemical vapor deposition

S. Dong, Jinshan Yang, Jianbao Hu, 2012 .

Reactive melt infiltrated C-f/SiC composites with robust matrix derived from novel engineered pyrolytic carbon structure

S. Dong, Jinshan Yang, Jianbao Hu, 2017 .

Fabrication and properties of C f /Ta 4 HfC 5 ‐SiC composite via precursor infiltration and pyrolysis

S. Dong, Le Gao, D. Ni, 2021, Journal of the American Ceramic Society.

Ablation behavior and mechanisms of 3D-Cf/Ta0.8Hf0.2C-SiC composite at temperatures up to 2500 °C

X. Zhang, S. Dong, Le Gao, 2022, Journal of the European Ceramic Society.

Fabrication of carbon fiber reinforced ceramic matrix composites with improved oxidation resistance using boron as active filler

S. Dong, Jinshan Yang, Le Gao, 2010 .

Microstructure observation and analysis of 3D carbon fiber reinforced SiC-based composites fabricated through filler enhanced polymer infiltration and pyrolysis

S. Dong, Le Gao, Yusheng Ding, 2012 .

Research Progress in SiC-Based Ceramic Matrix Composites

S. Dong, Jianbao Hu, Le Gao, 2012 .

Progress in SiC-Based Ceramic Matrix Composites

S. Dong, Jianbao Hu, Le Gao, 2012 .

Interphase degradation of three‐dimensional Cf/SiC–ZrC–ZrB2 composites fabricated via reactive melt infiltration

S. Dong, Le Gao, Y. Kan, 2017 .

Improved ablation resistance of 3D-Cf/SiBCN composites with (PyC/SiC)3 multi-layers as interphase

N. Ni, S. Dong, Le Gao, 2021 .

The effect of Al2O3 on the high‐temperature oxidation resistance of Si‐B‐C ceramic under air atmosphere

Qin Shan, S. Dong, Jianbao Hu, 2018 .

Effects of preform pore structure on infiltration kinetics and microstructure evolution of RMI-derived Cf/ZrC-ZrB2-SiC composite

S. Dong, Le Gao, Yusheng Ding, 2020 .

Fabrication and properties of Cf/ZrC‐SiC‐based composites by an improved reactive melt infiltration

S. Dong, Le Gao, Y. Kan, 2018 .

Erratum to ‘Fabrication of carbon fiber reinforced ceramic matrix composites with improved oxidation resistance using boron as active filler’ [J. Eur. Ceram. Soc. 30 (2009) 787–792]

S. Dong, Jinshan Yang, Le Gao, 2010 .

Ablation behavior and mechanism of C f /SiBCN composites in plasma ablation flame

S. Dong, Le Gao, Yusheng Ding, 2019, Journal of the American Ceramic Society.

Ablation behavior of Cf/ZrC-SiC-based composites fabricated by an improved reactive melt infiltration

Y. Ding, S. Dong, Le Gao, 2019 .

Fabrication of Carbon Fiber Reinforced Ultrahigh Temperature Ceramics (UHTCs) Matrix Composite

S. Dong, Le Gao, Yusheng Ding, 2010 .

Tailing Properties of Cf/SiC Composites via Modification of Matrix Composition

S. Dong, Le Gao, Yusheng Ding, 2010 .

Influence of boron nitride nanotubes on the damage evolution of SiCf/SiC composites

Qin Shan, S. Dong, Jinshan Yang, 2018, Journal of the European Ceramic Society.

Fabrication of Ti3SiC2 powders using TiH2 as the source of Ti

S. Dong, Jinshan Yang, Le Gao, 2012 .

Novel Graphene Planar Architecture with Ultrahigh Stretchability and Sensitivity.

S. Dong, Jinshan Yang, Xiao You, 2020, ACS applied materials & interfaces.

Interconnected graphene scaffolds for functional gas sensors with tunable sensitivity

S. Dong, Jinshan Yang, Xiao You, 2020 .

Acoustic emission and X-ray computed microtomography characterization of damage accumulation in a woven Cf/SiC composite

Qin Shan, S. Dong, Yudong Xue, 2019, Materials Characterization.

In situ growth behavior of boron nitride nanotubes on the surface of silicon carbide fibers as hierarchical reinforcements

S. Dong, Jianbao Hu, Le Gao, 2016 .

Boron Content on Microstructure and Mechanical Properties of Amorphous Boron Carbide by Chemical Vapor Deposition

S. Dong, Jianbao Hu, Le Gao, 2017 .

Process and mechanical properties of carbon/carbon–silicon carbide composite reinforced with carbon nanotubes grown in situ

S. Dong, Jianbao Hu, Le Gao, 2013 .

Low‐temperature reactive hot‐pressing of Ta 0.2 Hf 0.8 C‐SiC ceramics at 1700°C

X. Zhang, S. Dong, Le Gao, 2023, Journal of the American Ceramic Society.

Microstructure analysis of Cf/SiC–ZrC composites in both fabrication and plasma wind tunnel testing processes

Zujian Wang, Huifang Zhou, S. Dong, 2014 .