M. Kostina

发表

Structure and mechanical properties of high strength austenitic Mn–Ni–Cu–V–C dispersionally hardened steel

M. Kostina, V. M. Blinov, G. Kalinin, 2022, Voprosy Materialovedeniya.

Features of chemical composition and structural-phase state decreasing corrosion resistance of parts from 18Cr-10Ni steel

V. S. Kostina, M. Kostina, A. Kudryashov, 2021, Izvestiya. Ferrous Metallurgy.

Cold resistance of new casting Cr – Mn – Ni – Mo – N steel. Part 2. Investigation of the factor of non-metallic inclusions particles under static and impact loading at low temperatures

V. S. Kostina, M. Kostina, O. Antonova, 2022, Izvestiya. Ferrous Metallurgy.

Synthesis of 8-R-7-amino-3-tert-butylpyrazolo- [5,1-c][1,2,4]triazin-4(6H)-ones derivatives

M. Kostina, L. Mironovich, 2012, Chemistry of Heterocyclic Compounds.

The Features of the Chemical Composition and Structural-Phase State Determining a Decrease in the Corrosion Resistance of 18Cr–10Ni Steel Parts

V. S. Kostina, M. Kostina, A. Kudryashov, 2021, Steel in translation.

The development of new metallurgical materials and technologies. Part 1

M. Kostina, K. Grigorovich, L. Leont’ev, 2016, Steel in translation.

Influence of rare-earth metals on the high-temperature strength of Ni3Al-based alloys

M. Kostina, A. Morozov, O. Bazyleva, 2011 .

Static and cyclic strength of austenitic corrosion-resistant cast Cr-Ni-Mn-Mo-N steel

M. Kostina, V. F. Terent’ev, D. V. Prosvirin, 2015, Russian Metallurgy (Metally).

Effect of copper additions on the mechanical properties of iron

M. Kostina, V. Yusupov, M. Perkas, 2011 .

Microstructure and properties of the high-nitrogen Fe–Cr austenite

M. Kostina, Y. Ustinovshikov, O. A. Bannykh, 1999 .

On the strengthening mechanisms of high nitrogen austenitic stainless steels

R. Kaibyshev, A. Belyakov, M. Kostina, 2023, Materials Letters.

Technology for Producing a Low-Alloy Martensitic 10Kh3A Steel with an Overequilibrium Nitrogen Content

M. Kostina, S. Muradyan, L. Rigina, 2019, Russian Metallurgy (Metally).

Effect of High-Gradient Directional Crystallization on the Structure and Mechanical Properties of Corrosion-Resistant Nitrogen-Bearing Martensitic Steel 08Kh14AN4MDB

M. Kostina, I. A. Afanas’ev, Y. Bondarenko, 2004 .

Structure and Properties of the Welded Joints of Rolled Austenitic High-Nitrogen Steel Fabricated by Manual Consumable-Electrode Arc Welding

V. S. Kostina, M. Kostina, A. Kudryashov, 2022, Russian Metallurgy (Metally).

Cold resistance of new casting Cr – Mn – Ni – Mo – N steel with 0.5 % of N. Part. 1

V. S. Kostina, M. Kostina, S. Muradyan, 2019 .

Cold Resistance of New Casting Cr–Mn–Ni–Co Steel with 0.5% of N. Part One

V. S. Kostina, M. Kostina, S. Muradyan, 2019, Steel in translation.

Using the Method of Measuring the Microhardness of Different Zones of Welded Joints to Assess the Strength Properties

V. S. Kostina, M. Kostina, V. Timokhin, 2022, Key Engineering Materials.

Effect of hot-rolling and heat-treatment conditions on the structure and mechanical and technological properties of nitrogen-bearing austenitic steel 05Kh22AG15N8M2F-Sh

M. Kostina, G. Kalinin, O. A. Bannykh, 2006 .

Phase transformations in a corrosion-resistant high-chromium nitrogen-bearing steel

M. Kostina, A. Korneev, S. Muradyan, 2011 .

Austenitic high-strength nitrogen-containing cast steel: structure, casting, mechanical and operational properties, weldability

V. S. Kostina, M. Kostina, S. Muradyan, 2018 .

Cooperative Mechanism of the σ-Phase → Ferrite Transformation in Stainless Steel 05Kh22AG15N8M2F and Hardenability of Steels

M. Kostina, V. Kraposhin, A. Talis, 2014, Metal Science and Heat Treatment.

On the growth of Pleurozium schreberi (Bryophyta) in Moscow Province

M. Kostina, P. A. Agapov, G. A. Safronova, 2013 .

High Strength Austenite Mn–Ni–Cu–V–C Dispersion Hardened Steel

M. Kostina, G. Kalinin, O. Fomina, 2022, Inorganic Materials: Applied Research.

Corrosion stability of austenitic steels 05Kh22AG15N8M2F and 12Kh18N10T in chloride-containing media

V. Sergienko, M. Kostina, V. Egorkin, 2017, Protection of Metals and Physical Chemistry of Surfaces.

Pitting corrosion resistance of chromium-nitrogen steels with an overequilibrium nitrogen content

M. Kostina, S. Mushnikova, C. Andreev, 2009 .

In the Memory of Professor Tsolo Rashev (1933–2019)

M. Kostina, L. Zhekova, 2021, Steel in Translation.

Structure and Properties of the Metal in the Laser Welding Joints of an Austenitic Steel Containing ~0.5% N in the As-Cast and Deformed States

V. S. Kostina, M. Kostina, S. Muradyan, 2018, Russian Metallurgy (Metally).

Structure and properties of high-temperature austenitic low-carbon 01Kh15N22AG2V4TYu and 02Kh18N12AG11MFB steels

M. Kostina, V. M. Blinov, E. Blinov, 2011 .

Structure and properties of a high-temperature austenitic steel at high temperatures

T. V. Tykochinskaya, V. Nemov, M. Kostina, 2010 .

Structure of the Kh21A13 steel and phase transformations upon incomplete quenching of high-nitrogen Fe-Cr steels

A. V. Dymov, M. Kostina, M. Filippov, 2002 .

Corrosion properties of austenitic Cr-Mn-Ni-N steels with various manganese concentrations

M. Kostina, V. P. Mel’nik, I. Bannykh, 2008 .

The concept of species in poplars (genus Populus L., Salicaceae) based on the example of the subgenus Tacamahaca (Spach) Penjkovsky representatives growing in Russia and neighbouring countries

M. Kostina, N. Vasilieva, Yu.A. Nasimovich, 2019, SOCIALNO-ECOLOGICHESKIE TECHNOLOGII.

Natural and cultivated poplars of Irkutsk Province and Buryat Republic

M. Kostina, N. Vasilieva, Yu.A. Nasimovich, 2018 .

Cultivated poplars (Populus, Salicaceae) of Saratov and Engels (Saratov province)

M. Kostina, Yu.A. Nasimovich, 2018 .

Preliminary results of the molecular genetic investigation of the poplar hybridization naturally and in the urban beautification

M. Kostina, N. Vasilieva, Yu.A. Nasimovitch, 2018 .

Structure and Developmental Rhythm of Shoot Systems of A.frutescens (L.) K. Koch., A. replicata Lam., and A. pyrifolia Bunge (Atraphaxis L., Polygonaceae)

M. Kostina, O. Yurtseva, 2021, Contemporary Problems of Ecology.