S. Kwun

发表

Study on the slope change in the larson-miller plot of 23Cr-26Ni-W austenitic heat-resistant steel

Young-Hoon Chung, Young M. Lee, S. Kwun, 2014, Metals and Materials International.

High Temperature Fatigue Behavior of 23Cr26Ni Heat Resistant Steel

Heewoong Lee, W. Jung, S. Kwun, 2010 .

Three-dimensional Monte-Carlo simulation of grain growth using triangular lattice

S. Kwun, S. Chae, Myung-Ho Kim, 2005 .

Comparison of equal channel angular pressing and cold rolling in the evolution of microstructure and texture in zirconium

S. Kwun, S. Chae, S. Hwang, 2005 .

Grain boundary character distribution of computer microstructure generated in HCP materials by Gaussian distribution and the Monte-Carlo method

S. Kwun, S. Chae, Myung-Ho Kim, 2001 .

Microstructure evolution in Zr under equal channel angular pressing

S. Kwun, S. Chae, S. Hwang, 2002 .

Evaluation of thermal degradation of 2.25Cr–1Mo steel by magnetic Barkhausen noise

C. S. Kim, S. Kwun, J. Byeon, 2004 .

Magnetic Evaluation of Microstructures and Strength of Eutectoid Steel

S. Kwun, J. Byeon, 2003 .

Evaluation of Microstructure and Mechanical Properties of Metals by Non-Destructive Methods

S. Kwun, J. Byeon, 2006 .

Highly ordered self-organized TiO2 nanotube arrays prepared by a multi-step anodic oxidation process

S. Han, S. Kwun, Gyeungho Kim, 2009 .

Effect of creep deformation on the microstructural evolution of 11CrMoVNb heat resistant steel

D. Park, Kyu Ho Lee, J. Suh, 2012 .

Fabrication of high strength and high conductivity copper alloys by rod milling

K. Y. Lee, S. Kwun, H. Choi, 1997 .

Characterization of creep–fatigue in ferritic 9Cr–1Mo–V–Nb steel using ultrasonic velocity

C. S. Kim, I. Park, S. Kwun, 2008 .

Influence of Precipitate and Martensite Lath on the Magnetic Properties in Creep Damaged 11Cr-3.45W Steel

C. S. Kim, S. Kwun, 2007 .

Microstructural Evolution and Ultrasonic Nondestructive Evaluation During Creep-Fatigue of 9Cr Ferritic Heat-Resisting Steel

I. Park, S. Kwun, C. Kim, 2007 .

Fatigue crack initiation and propagation in a quenched and tempered niobium bearing HSLA steel

R. Fournelle, S. Kwun, 1982 .

Effect of Mo addition on the crystal texture and deformation twin formation in Zr-based alloys

S. Kwun, S. Chae, Myung-Ho Kim, 2001 .

Microstructural Evaluation of Isothermally Aged 12Cr Steel by Magnetic Property Measurement

C. S. Kim, J. Kang, S. Kwun, 2006 .

Magnetic nondestructive evaluation of thermally degraded 2.25Cr–1Mo steel

S. Kwun, J. Byeon, 2004 .

Plastic zone size measurement by critical grain growth method

S. Kwun, S. H. Park, 1987 .

Investigation of crack closure in stainless steel by laser interferometry

S. Kwun, Y. Jo, 1991 .

Effect of Nitrogen on Creep Properties of 22Cr-25Ni Austenitic Heat-Resistant Steels

Young-Hoon Chung, W. Jung, S. Kwun, 2008 .

Low cycle fatigue properties and an energy-based approach for as-extruded AZ31 magnesium alloy

S. Kwun, K. Shin, S. Kwon, 2011 .

Low cycle fatigue properties and cyclic deformation behavior of as-extruded AZ31 magnesium alloy

S. Kwun, K. Shin, S. Kwon, 2010 .

Low cycle fatigue properties and cyclic deformation behavior of as-extruded AZ 31 magnesium alloy

S. Kwun, K. Shin, S. Kwon, 2010 .

The effects of process control agents on mechanical alloying mechanisms in the TiAl system

S. Kwun, Wonsik Lee, 1996 .

Growth behavior and microstructure of oxide scales grown on WSi2 coating

S. Kwun, Gyeungho Kim, K. Hong, 2008 .

Microstructural Characterization of Creep Damaged 11Cr-3.5W-3Co Steel

Seung Seok Lee, S. Kwun, B. Ahn, 2006 .

Phase Transformation in Al-4at.%Zr Alloy during Mechanical Alloying and Heat-treatment Processes

S. Kwun, Il-ho Kim, Jae-Pil Park, 2005 .

The Low Cycle Fatigue Behavior of Equal-Channel Angular Pressed Al 5052 Alloy

S. Kwun, D. Shin, W. H. Kim, 2008 .

Low cycle fatigue behavior of a quenched and tempered niobium bearing HSLA steel

R. Fournelle, S. Kwun, 1980 .

Threshold for fatigue macrocrack propagation in some aluminum alloys

P. Liaw, J. McKittrick, S. Kwun, 1981 .

Threshold stress intensity factor, KIH for delayed hydride cracking of a Zr-2.5Nb tube with loading mode

Young-Suk Kim, S. Kwun, Sun Sam Park, 2008 .

Plastic work of fatigue crack propagation in steels and aluminum alloys

P. Liaw, S. Kwun, M. Fine, 1981 .

High temperature low cycle fatigue properties of 24Cr ferritic stainless steel for SOFC applications

Byungkyu Kim, Dong-Ik Kim, I. Choi, 2013 .

Effect of Additive Powder on Microstructural Evolutions and Mechanical Properties of the Wide-gap Brazed Region in IN738 superalloy

Y. Kim, S. Kwun, J. Byeon, 2005 .

Effects of grain shape and texture on the yield strength anisotropy of Al-Li alloy sheet

S. Kwun, M. Shin, Chang-Whan Lee, 1999 .

Influence of Plastic Deformation during ECAP on Precipitation Temperature of γ″ in IN 718 Alloy

S. Kwun, Il-ho Kim, 2006 .

A study on powder mixing for high fracture toughness and wear resistance of WC―Co―Cr coatings sprayed by HVOF

S. I. Kwun, S. Kwun, M. Shin, 2010 .

Fatigue deformation mechanism of the annealed Zircaloy-4 with texture

D. Lee, S. Kwun, H. Choi, 1998 .

Diffusion in mechanically alloyed Al-4Mg alloy

S. Kwun, J. Cho, 1992 .

Changes in Mechanical Properties of the Wide-Gap Region Brazed with Various Brazing Temperatures and Times

S. Kwun, Y. H. Kim, 2005 .

Phase Analysis in the Region Brazed with Ni-14Cr-10Co-3.5Al-2.5Ta-2.8B Filler Metal Using Electron Backscatter Diffraction

S. Kwun, Y. H. Kim, 2008 .

Identification of Phases in the Wide-Gap Region Brazed with BNi-3 Filler Metal Powder Using Electron Backscatter Diffraction

S. Kwun, Il-ho Kim, S. Shin, 2007 .

Ultrasonic Evaluation of Creep Damage of High Temperature Metallic Materials with Different Microstructures

S. Kwun, J. Song, J. Byeon, 2004 .

Assessment of Tensile and Fatigue Damage in 316L Stainless Steel by Acoustic Emission Technique

S. Kwun, J. Byeon, K. Kang, 2007 .

Ultrasonic nondestructive evaluation of microstructure and strength of carbon steels

S. Kwun, W. Choo, S. Hong, 2000 .

Effects of Combined Surface Modification on Adhesion Strength of CrN Coatings for STS420

Y. Sohn, S. Kwun, G. C. Jeong, 2010 .

Strain-Induced Martensitic Phase Transformation by Low-Cycle Fatigue in AISI 316L Stainless Steel

Y. Jeon, S. Kwun, J. Byeon, 2008 .

Grain refinement of commercial purity zirconium by equal channel angular pressing

Hyungsun Kim, S. Kwun, S. Chae, 2003 .

Ultrasonic Nondestructive Evaluation of the Creep Damaged IN738LC Superalloy

S. Kwun, J. Song, J. Byeon, 2004 .

Grain refinement of commercially pure zirconium by ECAP and subsequent intermediate heat treatment

S. Kwun, S. Chae, Myung-Ho Kim, 2007 .

Cyclic hardening and softening behavior of a fully annealed zircaloy-4

D. Lee, S. Kwun, 1994 .

Correlation of Magnetic Barkhausen Emission Profile with Strength of Thermally Degraded 2.25Chromium-1Molybdenum Steel

Y. Sohn, S. Kwun, J. Byeon, 2005 .

Nondestructive Evaluation of Thermally Degraded 2.25Cr-1Mo Steel by Electrical Resistivity Measurement

Sook In Kwun, S. Kwun, J. Byeon, 2003 .

Evaluation of Thermal Degradation of 2.25Cr-1Mo Steel by High Frequency Ultrasonic Attenuation Measurement

S. Kwun, S. Hong, J. Byeon, 2005 .

Evaluation of Creep Reliability of Powder Metallurgy and Cast-type Ni-based Superalloy by Using Ultrasonic Wave

S. Kwun, J. Byeon, C. Hyun, 2012 .

Influence of Precipitates and Dislocations on the Acoustic Nonlinearity in Metallic Materials

C. Lissenden, S. Kwun, C. Kim, 2009 .