Sandip Bhattacharyya

发表

Cracking of an austenitic stainless steel lance pipe in a lime calcining plant

G. Mukhopadhyay, Sandip Bhattacharyya, 2013 .

Failure analysis of a 40 ton crane hook at a Hot Strip Mill

Souvik Das, G. Mukhopadhyay, Sandip Bhattacharyya, 2018 .

Microstructural prediction through artificial neural network (ANN) for development of transformation induced plasticity (TRIP) aided steel

W. Bleck, Sandip Bhattacharyya, D. Bhattacharjee, 2013 .

Failure analysis of hot sinter screens of a sinter plant

G. Mukhopadhyay, Sandip Bhattacharyya, P. Sinha, 2013 .

An Investigation on the Cracking of Air Tubes of Rotary Kilns in a Sponge Iron Plant

G. Mukhopadhyay, Sandip Bhattacharyya, 2011 .

Failure analysis of re-bars during bending operations

Souvik Das, Jitendra Mathur, Sandip Bhattacharyya, 2014 .

Failure Analysis of the Liner Plate of CDQ Chamber Made of AISI 310

G. Mukhopadhyay, Sandip Bhattacharyya, Sumanta Mukhopadhyay, 2015, Journal of Failure Analysis and Prevention.

Cracking of AISI 309S Stainless Steel Lance Tube Used for Coal Injection in Blast Furnace

G. Mukhopadhyay, Sandip Bhattacharyya, 2015, Metallography, Microstructure, and Analysis.

Bulging of inner cover of a batch annealing furnace in a cold rolling mill

G. Mukhopadhyay, Sandip Bhattacharyya, 2012 .

Failure of high-chromium iron roll in compact strip production MILL

Sandip Bhattacharyya, Arthita Dey, Arvind Kumar Jha, 2013 .

Failure analysis of steel wire of grade LRPC during drawing process

Souvik Das, Sandip Bhattacharyya, T. Bhattacharyya, 2013 .

Metallurgical investigation of different causes of center bursting led to wire breakage during production

Sandip Bhattacharyya, Tanmay Bhattacharyya, Souvik Das, 2013 .

Pinch Roller Failure Analysis and Resulting Enhancement of Rebar Mechanical Properties

Souvik Das, Sandip Bhattacharyya, G. Mukherjee, 2013, Journal of Failure Analysis and Prevention.

Failure Analysis of Motor Tire Bead Wires During Torsion Test

Souvik Das, Jitendra Mathur, Sandip Bhattacharyya, 2013, Journal of Failure Analysis and Prevention.

Failure analysis of an attemperator in a steam line of a boiler

G. Mukhopadhyay, Sandip Bhattacharyya, 2011 .

Improving the property of a water box nozzle made of 17-4PH steel by suitable heat treatment

Souvik Das, G. Mukhopadhyay, Sandip Bhattacharyya, 2015 .

Development of wear resistant hammer heads for coal crushing application through experimental studies and field trials

G. Mukhopadhyay, Sandip Bhattacharyya, K. Kishore, 2019, International Journal of Refractory Metals and Hard Materials.

Development of AISI A2 Tool Steel Beater Head for an Impact Crusher in a Sinter Plant

G. Mukhopadhyay, Sandip Bhattacharyya, Piyas Palit, 2015, Metallography, Microstructure, and Analysis.

Failure analysis of cracking in wheel rims – material and manufacturing aspects

Sandip Bhattacharyya, Manashi Adhikary, S. Sarkar, 2008 .

An assessment on coatability of transformation induced plasticity (TRIP)-aided steel

W. Bleck, Sandip Bhattacharyya, D. Bhattacharjee, 2013 .

Failure analysis of stainless steel tubes in a recuperator due to elevated temperature sulphur corrosion

Sandip Bhattacharyya, S. Sarkar, M. B. Das, 2008 .

Case study – Analysis of grayish stick type sliver in cold rolled strips

Souvik Das, Sandip Bhattacharyya, Tanmay Bhattacharyya, 2014 .

Investigation on Bulging of Blow Pipe in a Blast Furnace

G. Mukhopadhyay, Sandip Bhattacharyya, Pankhuri Sinha, 2013, Journal of Failure Analysis and Prevention.

Movable hood tube in LD convertor: Failure analysis and coating solution

G. Mukhopadhyay, Sandip Bhattacharyya, K. Kishore, 2019, Engineering Failure Analysis.

Failure analysis of the impellers of coke plant

Souvik Das, G. Mukhopadhyay, Sandip Bhattacharyya, 2014 .

Structure-Property Correlation in TRIP Aided Steels

Sarman Singh, R. Ranjan, Sandip Bhattacharyya, 2013 .