S. Nagai

发表

Performance of plastic gear made of carbon fiber reinforced poly-ether-ether-ketone: Part 2

Susumu Nagai, Yoshitaka Uchiyama, M. Kurokawa, 1999 .

Tribological Properties and Gear Performance of Polyoxymethylene Composites

M. Kurokawa, Y. Uchiyama, S. Nagai, 2000 .

Performance of plastic gear made of carbon fiber reinforced polyamide 12

Susumu Nagai, Yoshitaka Uchiyama, Tomoaki Iwai, 2003 .

Thermal conductivity of a polymer composite

Susumu Nagai, S. Nagai, Y. Agari, 1993 .

Thermal conductivities of composites in several types of dispersion systems

S. Nagai, Y. Agari, A. Ueda, 1991 .

Preparation, characterization and properties of gradient polymer blends: discussion of poly(vinyl chloride)/poly(methyl methacrylate) blend films containing a wide compositional gradient phase

S. Nagai, A. Ueda, Y. Agari, 1996 .

The Polymerization and Polymers of Itaconic Acid Derivatives. VIII. A Cation Exchange Resin from Itaconic Anhydride

S. Nagai, Kei Yoshida, 1965 .

Electrical and thermal conductivities of polyethylene composites filled with biaxial oriented short-cut carbon fibers

S. Nagai, Y. Agari, A. Ueda, 1994 .

Transfer Constants to Monomers, Polymers, Catalysts and Initiators, Solvents and Additives, and Sulfur Compounds in Free Radical Polymerization

S. Nagai, A. Ueda, 1999 .

The Polymerization and Polymers of Itaconic Acid Derivatives. VI. The Polymerization and Copolymerization of Itaconic Anhydride

S. Nagai, 1964 .

Polymerization and Polymers of Itaconic Acid Derivatives. V. The Copolymerization Reactivity of Itaconic Acid in an Aqueous Solution

S. Nagai, 1963 .

Studies on Polymerization and Polymers of Itaconic Acid Derivatives

S. Nagai, Kei Yoshida, 1960 .

On the structure of poly(itaconic acid)

S. Nagai, F. Fujiwara, 1969 .

Thermal conductivity of a polymer filled with particles in the wide range from low to super‐high volume content

M. Tanaka, S. Nagai, Y. Agari, 1990 .

Thermal conductivity of a polymer composite filled with mixtures of particles

M. Tanaka, S. Nagai, Y. Agari, 1987 .

Thermal conductivity of a polyethylene filled with disoriented short‐cut carbon fibers

S. Nagai, Y. Agari, A. Ueda, 1991 .

Thermal diffusivity and conductivity of PMMA/PC blends

S. Nagai, Y. Agari, A. Ueda, 1997 .

Charge Stripes and Electronic States in Underdoped La 2- x Sr x CuO 4

T. Tohyama, S. Maekawa, S. Nagai, 2000 .

Measurement of thermal diffusivity and specific heat capacity of polymers by laser flash method

S. Nagai, Y. Agari, A. Ueda, 1995 .

The γ → α partial transformation in nylon 12 by drawing

N. Kasai, S. Nagai, Toshihiko Ishikawa, 1981 .

Effect of casting conditions on polymorphism of nylon‐12

N. Kasai, S. Nagai, Toshihiko Ishikawa, 1980 .

Tribological Properties of Polyoxymethylene Composites Against Aluminum

M. Kurokawa, Y. Uchiyama, S. Nagai, 2003 .

Surface characteristics of fluoroalkylsilicone—poly(methyl methacrylate) block copolymers and their PMMA blends

H. Inoue, S. Nagai, K. Matsukawa, 1990 .

Surface characteristics of polydimethylsiloxane—poly(methyl methacrylate) block copolymers and their PMMA blends

H. Inoue, S. Nagai, K. Matsukawa, 1990 .

Block copolymers derived from azobiscyanopentanoic acid. XI. Properties of silicone–PMMA block copolymers prepared via polysiloxane(azobiscyanopentanamide)s

H. Inoue, S. Nagai, A. Ueda, 1988 .

Macro‐azo‐initiators composed of various polyesters: Their syntheses, thermal properties, and application to block copolymerization

S. Nagai, A. Ueda, Michie Yoshida, 1994 .

Block copolymers derived from azobiscyanopentanoic acid. X. Synthesis of silicone–vinyl block copolymers via polysiloxane(azobiscyanopentanamide)s

H. Inoue, S. Nagai, A. Ueda, 1988 .

The reduction of silver nitrate by plant cells, particularly by chloroplasts

S. Nagai, 1955, Protoplasma.

Reduction of silver nitrate by cystoliths ofFicus elastica

S. Nagai, 1962, Protoplasma.

Thermal conductivity of polyethylene/polystyrene blends containing SEBS block copolymer

S. Nagai, Y. Agari, A. Ueda, 1992 .

Thermal conductivities of blends of polyethylene/SEBS block copolymer and polystyrene/SEBS block copolymer

S. Nagai, Y. Agari, A. Ueda, 1993 .

Formation of α-nylon 12 by solution casting

S. Nagai, T. Ishikawa, 1977 .

Studies on block copolymers derived from azobiscyanopentanoic acid. VIII. Decomposition of dimethyl azobiscyanopentanoate as a model of polymer containing azo linkages.

S. Nagai, A. Ueda, 1986 .

Direct polycondensation of 4,4′‐azobis‐4‐cyanopentanoic acid with diols and diamines using 1‐methyl‐2‐chloropyridinium iodide

H. Inoue, S. Nagai, K. Matsukawa, 1990 .

Block copolymers derived from azobiscyanopentanoic acid. V. Block copolymerization initiated with a polyethylene glycol containing scissile azo linkages in its main chain

S. Nagai, A. Ueda, 1987 .

Block copolymers derived from azobiscyanopentanoic acid. VI. Synthesis of a polyethyleneglycol–polystyrene block copolymer

S. Nagai, A. Ueda, 1986 .

Block copolymers derived from azobiscyanopentanoic acid. IV. Synthesis of a polyamide–polystyrene block copolymer

S. Nagai, A. Ueda, 1984 .

Studies on block copolymers derived from azobiscyanopentanoic acid. VII. Synthesis of polybutadiene-polystyrene block copolymers.

S. Nagai, A. Ueda, 1986 .

Thermal behavior of a nylon-12

N. Kasai, S. Nagai, Toshihiko Ishikawa, 1980 .

Formation of α nylon 12 by drawing

N. Kasai, S. Nagai, Toshihiko Ishikawa, 1979 .