M. Piccioni

发表

Mechanical characterization of CFRP composites by ultrasonic immersion tests: Experimental and numerical approaches

Aguinaldo Fraddosio, Mario Daniele Piccioni, Salvatore Marzano, 2014 .

A new numerical approach for determining optimal thrust curves of masonry arches

E. Sacco, A. Fraddosio, M. Piccioni, 2019, European Journal of Mechanics - A/Solids.

A New Ultrasonic Amplitude Tomography Approach, with Validation on Masonry Tuff Blocks

Anna Castellano, A. Fraddosio, M. Piccioni, 2020, Journal of Nondestructive Evaluation.

Dynamic Identification of Tensile Force in Tie-Rods by Interferometric Radar Measurements

Anna Castellano, A. Fraddosio, M. Piccioni, 2021, Applied Sciences.

Dynamic damage identification for a full-scale parabolic tuff barrel vault under differential settlements of the supports

G. Milani, J. Scacco, Anna Castellano, 2021, Construction and Building Materials.

Ultrasonic immersion tests for mechanical characterization of multilayered anisotropic materials

Anna Castellano, Pilade Foti, A. Fraddosio, 2014, 2014 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems Proceedings.

Characterization of Material Damage by Ultrasonic Immersion Test

Umberto Galietti, Aguinaldo Fraddosio, Mario Daniele Piccioni, 2015 .

Some advancements in the ultrasonic evaluation of initial stress states by the analysis of the acoustoelastic effect

Anna Castellano, A. Fraddosio, S. Marzano, 2017 .

Mechanical Characterization of Apricena Marble by Ultrasonic Immersion Tests

Aguinaldo Fraddosio, Mario Daniele Piccioni, Salvatore Marzano, 2014 .

Evaluation of damage anisotropy induced in GFRP composite materials by an innovative ultrasonic experimental approach

Anna Castellano, Pilade Foti, A. Fraddosio, 2017 .

Simulation of an Ultrasonic Immersion Test for the Characterization of Anisotropic Materials

Anna Castellano, Pilade Foti, A. Fraddosio, 2012 .

Thrust Surface Method: An innovative approach for the three-dimensional lower bound Limit Analysis of masonry vaults

Aguinaldo Fraddosio, Mario Daniele Piccioni, Nicola Lepore, 2020 .

On self-equilibrium state of V-expander tensegrity beam-like grids

Pilade Foti, A. Fraddosio, S. Marzano, 2017 .

On the mechanics of corbelled domes: new analytical and computational approaches

Aguinaldo Fraddosio, Mario Daniele Piccioni, Pilade Foti, 2017 .

Geometric numerical integrators based on the Magnus expansion in bifurcation problems for non-linear elastic solids

Anna Castellano, Pilade Foti, A. Fraddosio, 2014, Frattura ed Integrità Strutturale.

ASSESSMENT OF THE TRM REINFORCEMENT OF WINDOWED MASONRY WALLS THROUGH OMA IDENTIFICATION

S. Ivorra, Anna Castellano, A. Fraddosio, 2020, XI International Conference on Structural Dynamics.

Ultrasonic Characterization of Components Manufactured by Direct Laser Metal Deposition

S. Campanelli, A. Angelastro, Anna Castellano, 2020, Materials.

Phenomenological rate-independent uniaxial hysteretic models: A mini-review

A. Fraddosio, M. Piccioni, R. Capuano, 2022, Frontiers in Built Environment.

Linear and Nonlinear Ultrasonic Techniques for Monitoring Stress-Induced Damages in Concrete

T. Kundu, Anna Castellano, A. Fraddosio, 2021 .

Stability, bifurcation and post-critical behavior of a homogeneously deformed incompressible isotropic elastic parallelepiped subject to dead-load surface tractions

Pilade Foti, A. Fraddosio, S. Marzano, 2016 .

A lower bound estimate of the critical load in bifurcation analysis for incompressible elastic solids

Aguinaldo Fraddosio, Mario Daniele Piccioni, Salvatore Marzano, 2015 .

A lower bound estimate of the critical load for compressible elastic solids

Aguinaldo Fraddosio, Mario Daniele Piccioni, Pilade Foti, 2010 .

Pairwise Deformations of an Incompressible Elastic Body under Dead-Load Tractions

Mario Daniele Piccioni, Pilade Foti, Domenico De Tommasi, 2003 .

Improvements of the Ultrasonic Tomography for Applications to Historical Masonry Constructions

Aguinaldo Fraddosio, Mario Daniele Piccioni, Anna Castellano, 2019, RILEM Bookseries.

Derivation of a new free energy for biological membranes

G. Zurlo, M. Piccioni, L. Deseri, 2008 .

Minimal mass and self-stress analysis for innovative V-Expander tensegrity cells

Aguinaldo Fraddosio, Gaetano Pavone, Mario Daniele Piccioni, 2019, Composite Structures.

Ultrasonic goniometric immersion tests for the characterization of fatigue post-LVI damage induced anisotropy superimposed to the constitutive anisotropy of polymer composites

Aguinaldo Fraddosio, Mario Daniele Piccioni, Anna Castellano, 2017 .

Energy-efficient cable-actuation strategies of the V-Expander tensegrity structure subjected to five shape changes

A. Micheletti, A. Fraddosio, M. Piccioni, 2023, Mechanics Research Communications.

Morphology and self-stress design of V-Expander tensegrity cells

Aguinaldo Fraddosio, Gaetano Pavone, Mario Daniele Piccioni, 2017 .

Taylor-like bifurcations for a compressible isotropic elastic tube

Aguinaldo Fraddosio, Mario Daniele Piccioni, Salvatore Marzano, 2014 .

Quantitative analysis of QSI and LVI damage in GFRP unidirectional composite laminates by a new ultrasonic approach

Anna Castellano, A. Fraddosio, M. Piccioni, 2018, Composites Part B: Engineering.

Radar Interferometric Experimental Reconstruction of Three-Dimensional Displacement Vectors and Mode Shapes for Masonry Constructions

Anna Castellano, A. Fraddosio, M. Piccioni, 2022 .

Finite contact duration modeling of a Vibro-Impact Nonlinear Energy Sink to protect a civil engineering frame structure against seismic events

A. Fraddosio, M. Piccioni, S. Job, 2020, Engineering Structures.

A new experimental approach for small-scale dynamic tests on masonry arches aimed at seismic assessment

Anna Castellano, A. Fraddosio, M. Piccioni, 2021, International Journal of Masonry Research and Innovation.

The evaluation of the adhesion defects in FRCM reinforcements for masonry constructions by Sideband Peak Count based nonlinear acoustic technique

T. Kundu, Anna Castellano, A. Fraddosio, 2023, Journal of Vibration and Control.

SPC non-linear ultrasonic technique for detecting adhesion defects in FRCM reinforcements for masonry constructions

T. Kundu, Anna Castellano, A. Fraddosio, 2022, Health Monitoring of Structural and Biological Systems XVI.

Structural health monitoring of a historic masonry bell tower by radar interferometric measurements

Aguinaldo Fraddosio, Mario Daniele Piccioni, Francesco Paparella, 2018, 2018 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems (EESMS).

Further refinement of the Corbelling Theory for the equilibrium analysis of corbelled domes

Aguinaldo Fraddosio, Mario Daniele Piccioni, Nicola Lepore, 2019, Curved and Layered Structures.

A novel method for determining the feasible integral self-stress states for tensegrity structures

A. Fraddosio, M. Piccioni, Gaetano Pavone, 2021 .

Incompressible Elastic Bodies with Non-Convex Energy under Dead-Load Surface Tractions

Pilade Foti, S. Marzano, M. Piccioni, 2001 .