A. Bertsch

A. Bertsch, S. Metz, C. Trautmann, 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

Microfluidic device combining hydrodynamic and dielectrophoretic trapping for the controlled contact between single micro-sized objects and application to adhesion assays

P. Renaud, A. Bolopion, A. Bertsch, 2022, bioRxiv.

Stereolithography and microtechniques

S. Zissi, A. Bertsch, J. Andre, 1996 .

Temperature sensitivity of nanochannel electrical conductance.

Arnaud Bertsch, P. Renaud, A. Bertsch, 2015, ACS nano.

SU-8 nanocomposite coatings with improved tribological performance for MEMS

P. Renaud, M. Judelewicz, H. Hofmann, 2006 .

Multimaterial Nanoporous Membranes Shaped through High Aspect-Ratio Sacrificial Silicon Nanostructures

P. Renaud, S. Varricchio, A. Bertsch, 2017, ACS omega.

In-flow electrochemical detection of chemicals in droplets with pyrolysed photoresist electrodes: application as a module for quantification of microsampled dopamine.

P. Renaud, J. Teixidor, A. Bertsch, 2021, Lab on a chip.

On‐Chip Fabrication of Paclitaxel‐Loaded Chitosan Nanoparticles for Cancer Therapeutics

Mohammad Mahdi Hasani-Sadrabadi, Mohammad Ali Shokrgozar, Nassir Mokarram, 2014 .

Direct measurement of diffusing proteins in nanochannels using fluorescence correlation spectroscopy

P. Renaud, T. Lasser, A. Bertsch, 2009 .

Field effect modulated nanofluidic diode membrane based on Al2O3/W heterogeneous nanopore arrays

Fabien Wildhaber, Arnaud Bertsch, P. Renaud, 2013 .

Al2O3/W hetero-structured nanopore membranes: From native to tunable nanofluidic diodes

Juergen Brugger, P. Renaud, Songmei Wu, 2013, The 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Facile fabrication of nanofluidic diode membranes using anodic aluminium oxide.

Fabien Wildhaber, Arnaud Bertsch, Oscar Vazquez-Mena, 2012, Nanoscale.

Microfluidic synthesis of chitosan-based nanoparticles for fuel cell applications.

Mohammad Mahdi Hasani-Sadrabadi, Erfan Dashtimoghadam, Fatemeh Sadat Majedi, 2012, Chemical communications.

Microfluidic assisted self-assembly of chitosan based nanoparticles as drug delivery agents.

Mohammad Mahdi Hasani-Sadrabadi, Mohammad Ali Shokrgozar, Erfan Dashtimoghadam, 2013, Lab on a chip.

Simulation of epiretinal prostheses - Evaluation of geometrical factors affecting stimulation thresholds

Philippe Renaud, Arnaud Bertsch, Harsha Kasi, 2011, Journal of NeuroEngineering and Rehabilitation.

Ion beam etching redeposition for 3D multimaterial nanostructure manufacturing

P. Renaud, A. Bertsch, B. Desbiolles, 2019, Microsystems & nanoengineering.

Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing

Philippe Renaud, Arnaud Bertsch, Ludovic Serex, 2018, Micromachines.

Direct localised measurement of electrical resistivity profile in rat and embryonic chick retinas using a microprobe

Robert Meissner, Arnaud Bertsch, Harsha Kasi, 2010 .

Intracellular recording of cardiomyocyte action potentials with nanopatterned volcano-shaped microelectrode arrays.

P. Renaud, A. Bertsch, S. Rohr, 2019, Nano letters.

Direct observation of transitions between surface-dominated and bulk diffusion regimes in nanochannels.

P. Renaud, T. Lasser, A. Bertsch, 2009, Analytical chemistry.

Magnetically aligned nanodomains: application in high-performance ion conductive membranes.

Mohammad Mahdi Hasani-Sadrabadi, Erfan Dashtimoghadam, Fatemeh Sadat Majedi, 2014, ACS applied materials & interfaces.

A microfluidic approach to synthesizing high-performance microfibers with tunable anhydrous proton conductivity.

K. Jacob, P. Renaud, J. J. VanDersarl, 2013, Lab on a chip.

Distinguishing drug-induced minor morphological changes from major cellular damage via label-free impedimetric toxicity screening.

Robert Meissner, Arnaud Bertsch, Harsha Kasi, 2011, Lab on a chip.

Impinging planar jets: hysteretic behaviour and origin of the self-sustained oscillations

P. Renaud, F. Gallaire, A. Bertsch, 2021, Journal of Fluid Mechanics.

Conductive SU8 Photoresist for Microfabrication

P. Renaud, H. Hofmann, A. Bertsch, 2005 .

Ionic nanopeapods: Next-generation proton conducting membranes based on phosphotungstic acid filled carbon nanotube

Mohammad Mahdi Hasani-Sadrabadi, Karl I. Jacob, Erfan Dashtimoghadam, 2016 .

A microfluidic-based frequency-multiplexing impedance sensor (FMIS).

Philippe Renaud, Robert Meissner, Arnaud Bertsch, 2012, Lab on a chip.

Microfluidic Manipulation of Core/Shell Nanoparticles for Oral Delivery of Chemotherapeutics: A New Treatment Approach for Colorectal Cancer

Lobat Tayebi, Mohammad Mahdi Hasani-Sadrabadi, Karl I. Jacob, 2016, Advanced materials.

Rapid prototyping of small size objects

Christian Vogt, Philippe Renaud, Arnaud Bertsch, 2000 .

Superacid-doped polybenzimidazole-decorated carbon nanotubes: a novel high-performance proton exchange nanocomposite membrane.

P. Renaud, M. M. Hasani-Sadrabadi, A. Bertsch, 2013, Nanoscale.

On demand nanoliter sampling probe for collection of brain fluid

P. Renaud, H. Lashuel, J. Teixidor, 2022, bioRxiv.

A Simple and Reliable PDMS and SU-8 Irreversible Bonding Method and Its Application on a Microfluidic-MEA Device for Neuroscience Research

Philippe Renaud, Yufei Ren, Jia-Jin Jason Chen, 2015, Micromachines.

3D microfabrication by combining microstereolithography and thick resist UV lithography

Hubert Lorenz, Arnaud Bertsch, P. Renaud, 1999 .

Demonstration of cortical recording and reduced inflammatory response using flexible polymer neural probes

A. Bertsch, P. Renaud, K. Cheung, 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

In vivo neurochemical measurements in cerebral tissues using a droplet-based monitoring system

P. Renaud, Aurélien Thomas, A. Bertsch, 2017, Nature Communications.

Design and test of a MEMS strain-sensing device for monitoring artificial knee implants

K. Aminian, P. Renaud, A. Arami, 2013, Biomedical microdevices.

Ceramic microcomponents by microstereolithography

P. Renaud, H. Hofmann, A. Bertsch, 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

Static micromixers based on large-scale industrial mixer geometry.

A Bertsch, P Renaud, S Heimgartner, 2001, Lab on a chip.

Polyimide microfluidic devices with integrated nanoporous filtration areas manufactured by micromachining and ion track technology

Arnaud Bertsch, Stefan Metz, Christina Trautmann, 2004 .

Microstereolithography: a new process to build complex 3D objects

Philippe Renaud, Arnaud Bertsch, Laurence Beluze, 1999, Design, Test, Integration, and Packaging of MEMS/MOEMS.

Smart instrumentation for determination of ligament stiffness and ligament balance in total knee arthroplasty.

W Hasenkamp, J Villard, J R Delaloye, 2014, Medical engineering & physics.

Enclosed Electronic System for Force Measurements in Knee Implants

Kamiar Aminian, Arash Arami, Peter Ryser, 2014, Sensors.

Planar hydrodynamic traps and buried channels for bead and cell trapping and releasing

P. Renaud, A. Bertsch, D. Migliozzi, 2021, Lab on a chip.

Conductive SU8-silver composite photopolymer

A. Bertsch, P. Renaud, H. Hofmann, 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

Rapid exocytosis kinetics measured by amperometry within volcano microelectrodes

P. Renaud, A. Bertsch, Nicolas Maïno, 2023, The Analyst.

Impedance spectroscopy of the cell/nanovolcano interface enables optimization for electrophysiology

P. Renaud, A. Bertsch, Nicolas Maïno, 2023, Microsystems & nanoengineering.

Polyimide/SU-8 catheter-tip MEMS gauge pressure sensor

P. Renaud, H. Lintel, A. Bertsch, 2012, Biomedical microdevices.

Special Issue: 15 Years of SU8 as MEMS Material

Philippe Renaud, Arnaud Bertsch, P. Renaud, 2015, Micromachines.

SU-8 nanocomposite photoresist with low stress properties for microfabrication applications

P. Renaud, M. Judelewicz, H. Hofmann, 2006 .

Microstereolithography: a review

Duane B. Dimos, Alberto Pique, Andrew S. Holmes, 2003 .

Study of the spatial resolution of a new 3D microfabrication process: the microstereophotolithography using a dynamic mask-generator technique

J. Y. Jézéquel, Arnaud Bertsch, J. C. Andre, 1997 .

Instrumented prosthesis for knee implants monitoring

Oguz Atasoy, Pierre-André Farine, Catherine Dehollain, 2011, 2011 IEEE International Conference on Automation Science and Engineering.

A soft contact lens with a MEMS strain gage embedded for intraocular pressure monitoring

A. Bertsch, P. Renaud, A. Bertsch, 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

Industrial photochemistry XXIV. Relations between light flux and polymerized depth in laser stereophotolithography

J. Andre, S. Corbel, A. Bertsch, 1997 .

Combining microstereolithography and thick resist UV lithography for 3D microfabrication

P. Renaud, H. Lorenz, A. Bertsch, 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

Polyimide-Based Microfluidic Devices with Nanoporous Membranes for Filtration and Separation of Particles and Molecules

C. Trautmann, S. Gawad, P. Renaud, 2002 .

On-chip synthesis of fine-tuned bone-seeking hybrid nanoparticles.

K. Jacob, P. Renaud, M. Mahmoudi, 2015, Nanomedicine.

SU8‐Silver Photosensitive Nanocomposite

P. Renaud, H. Hofmann, A. Bertsch, 2004 .

Fluorine‐Based Plasma Treatment of Biocompatible Silicone Elastomer: The Effect of Temperature on Etch Rate and Surface Properties

Piotr Grabiec, Dariusz Szmigiel, Krzysztof Domański, 2008 .

3D micromixers-downscaling large scale industrial static mixers

P. Cousseau, A. Bertsch, P. Renaud, 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

Microfluidic-assisted bioprinting of tissues and organoids at high cell concentrations

P. Renaud, J. Mckinney, A. Bertsch, 2020, Biofabrication.

Microstructured Plastic Scintillators For Beam Profiling In Medical Accelerators

A. Mapelli, A. Bertsch, M. Pagano, 2023, 2308.15981.

Microphotofabrication of very small objects : Pushing the limits of stereophotolithography

Michel Cabrera, J. Y. Jézéquel, Arnaud Bertsch, 1998 .

Composite photopolymer microstructures: from planar to 3D devices

A. Bertsch, S. Metz, P. Renaud, 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).