M. Krause

发表

Ultrasonic imaging of defects in known anisotropic and inmomogeneous structures with fast synthetic aperture methodes

K. Mayer, K. Langenberg, P. K. Chinta, 2012 .

3D-printing with foam concrete: From material design and testing to application and sustainability

V. Mechtcherine, M. Krause, C. Schröfl, 2021 .

Ultrasonic Imaging of Concrete Elements Using Reconstruction by Synthetic Aperture Focusing Technique

Martin Krause, Martin Schickert, M. Krause, 2003 .

Location of Voids in Masonry Structures by Using Radar and Ultrasonic Traveltime Tomography

C. Maierhofer, M. Krause, A. Wendrich, 2006 .

NUMERICAL COMPUTATIONS FOR DESIGNING A SCRAMJET INTAKE

M. Krause, J. Ballmann, B. Reinartz, 2006 .

Modeling of Transition Effects in Hypersonic Intake Flows Using a Correlation-Based Intermittency Model

Marek Behr, Josef Ballmann, Martin Krause, 2008 .

Control of thickness/dimensions of pavements, foundations, elements and piles

Martin Krause, Denys Breysse, Alexander Taffe, 2012 .

NON DESTRUCTIVE EVALUATION OF DELAMINATIONS AND INTERFACES IN CONCRETE STRUCTURES

C. Maierhofer, D. Breysse, M. Krause, 2009 .

Development and combined application of NDT echo-methods for the investigation of post tensioned concrete bridges

Martin Krause, Daniel Algernon, Herbert Wiggenhauser, 2006 .

Testing Of Wooden Construction Elements with Ultrasonic Echo Technique and X-Ray

M. Krause, K. Osterloh, A. Hasenstab, 2022 .

Direct printing test for buildability of 3D-printable concrete considering economic viability

Viktor Mechtcherine, Martin Krause, Venkatesh Naidu Nerella, 2020 .

Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing

Viktor Mechtcherine, Frank Will, Jens Otto, 2019, Automation in Construction.

Elastic wave modes for the assessment of structural timber: ultrasonic echo for building elements and guided waves for pole and pile structures

Martin Krause, Jianchun Li, Ulrike Dackermann, 2014, Journal of Civil Structural Health Monitoring.

Elastic wave modes for the assessment of structural timber: ultrasonic echo for building elements and guided waves for pole and pile structures

Jianchun Li, M. Krause, U. Dackermann, 2014, Journal of Civil Structural Health Monitoring.

NDT of Structural Timber Members by Means of 3D Ultrasonic Imaging Techniques and Modelling

Klaus Mayer, Ute Antonie Effner, Martin Krause, 2013 .

Ultrasonic Imaging of Defects in Building Elements Made from Timber

Martin Krause, Klaus Mayer, Prashant Kumar Chinta, 2013 .

Progress in ultrasonic tendon duct imaging

Boris Milmann, Martin Krause, Frank Mielentz, 2011 .

Ultrasonic techniques for evaluation of reinforced concrete structures

M. Schickert, M. Krause, M. Krause, 2010 .

DIAGNOSTIC INVESTIGATIONS OF WOODEN STRUCTURES USING ULTRASONIC-ECHO TECHNIQUE

Martin Krause, Stefan Maack, M. Krause, 2009 .

Ultrasonic Imaging Methods for Investigation of Post-tensioned Concrete Structures: A Study of Interfaces at Artificial Grouting Faults and Its Verification

Boris Milmann, Martin Krause, Frank Mielentz, 2008 .

Practice-Oriented Buildability Criteria for Developing 3D-Printable Concretes in the Context of Digital Construction

Viktor Mechtcherine, Venkatesh Naidu Nerella, Martin Krause, 2018 .

Numerical Investigation of Hypersonic Intake Flows

M. Krause, J. Ballmann, 2000 .

Experimental investigation of freestream disturbances across an oblique shock wave via modal analysis with a wedge hot-film

M. Krause, E. Kraemer, U. Gaisbauer, 2019, Thermophysics and Aeromechanics.

Implementation of a new thermal model and static calibration of a wedge-shaped hot-film probe in a constant-temperature mode

M. Krause, E. Kraemer, U. Gaisbauer, 2018, International Journal of Heat and Mass Transfer.

Experimental and numerical investigation of the recovery ratio of a wedge-shaped hot-film probe

M. Krause, E. Kraemer, U. Gaisbauer, 2017 .

Piezoelectric two-layer plate for position stabilization

Günther Pfeifer, Wolf-Joachim Fischer, Daniel Steinert, 2014 .

Multimode Modeling and Imaging in Nondestructive Testing

H. Wiggenhauser, R. Marklein, K. Mayer, 2004 .

Strategic Optimization of 3D-Concrete-Printing Using the Method of CONPrint3D®

Martin Krause, Alexey Bulgakov, Daher Sayfeddine, 2018, Proceedings of the 35th International Symposium on Automation and Robotics in Construction (ISARC).

New approach for Characterization of Interfaces of Ballastless Railway Tracks Based on Ultrasonic Echo Principles

Xiaorong Gao, C. Boller, K. Mayer, 2016 .

Comparative Performance Tests and Validation of NDT Methods for Concrete Testing

Martin Krause, Daniel Algernon, Herbert Wiggenhauser, 2008 .

2D- and 3D-visualisation of NDT-data using data fusion technique

Martin Krause, Jens Wöstmann, Christiane Maierhofer, 2005 .

Nondestructive evaluation of grout defects in internal tendons of post-tensioned girders

Stefan Hurlebaus, Madhu M. Karthik, Herbert Wiggenhauser, 2018, NDT & E International.

Combination of NDT techniques for site investigation of non-ballasted railway tracks

C Colla, Martin Krause, Ch. Maierhofer, 2002 .

Characterization of Reflector Types by Phase-Sensitive Ultrasonic Data Processing and Imaging

Boris Milmann, Frank Mielentz, Karl-Jörg Langenberg, 2008 .

Physically Consistent Parameter Optimization for the Generation of Pose Independent Simulation Models Using the Example of a 6-axis Articulated Robot

Jürgen Fleischer, Martin Krause, M. Krause, 2013 .

Ultrasonic imaging of post-tensioned concrete elements: New techniques for reliable localization of grouting defects

Boris Milmann, Frank Mielentz, Klaus Mayer, 2008 .

Localization of grouting faults in post tensioned concrete structures

Martin Krause, M. Krause, 2012 .

New Possibilities for Ultrasonic Imaging of Concrete Elements

M. Krause, D. Streicher, B. Gräfe, 2007 .

Performance Demonstration of Non-Destructive Testing Methods

C. Maierhofer, H. Reinhardt, C. Grosse, 2022 .

Nondestructive Testing, 6. Nondestructive Testing in Civil Engineering

Martin Krause, Rosemarie Helmerich, Herbert Wiggenhauser, 2011 .