S. Berthon-Fabry

发表

Platinum supported on resorcinol–formaldehyde based carbon aerogels for PEMFC electrodes: Influence of the carbon support on electrocatalytic properties

P. Achard, R. Pirard, Julien Marie, 2006 .

Synthesis and Properties of Platinum Nanocatalyst Supported on Cellulose-Based Carbon Aerogel for Applications in PEMFCs

T. Budtova, F. Maillard, S. Berthon-Fabry, 2011 .

Thin chromium nitride PVD coatings on stainless steel for conductive component as bipolar plates of PEM fuel cells: Ex-situ and in-situ performances evaluation

Bernard Normand, Olivier Lavigne, Rudolf Metkemeijer, 2012 .

Study of diffusive limitations in Proton Exchange Membrane Fuel Cells (PEMFC)

P. Achard, N. Job, S. Berthon-Fabry, 2009 .

SAXS Characterization of Carbon Aerogels for Catalytic Supports

S. Berthon-Fabry, F. Ehrburger-Dolle, F. Bley, 2006 .

Activity and Durability of Platinum-Based Electrocatalysts Supported on Bare or Fluorinated Nanostructured Carbon Substrates

R. Metkemeijer, M. Dubois, F. Maillard, 2018 .

Development of a volumetric method—experimental test bench for hydrogen storage characterisation

P. Achard, J. González-Aguilar, S. Berthon-Fabry, 2007 .

Evaluation of lightweight and flexible insulating aerogel blankets based on Resorcinol-Formaldehyde-Silica for space applications

E. Jones, S. Berthon-Fabry, C. Hildenbrand, 2017 .

Influence upon cycling of oxygen amount in tin-based compound used as negative electrode in lithium-ion battery

J. Labbé, K. Guérin, S. Berthon-Fabry, 2020, Synthetic Metals.

Influence of the carbon texture of platinum/carbon aerogel electrocatalysts on their behavior in a proton exchange membrane fuel cell cathode

P. Achard, N. Job, M. Sennour, 2012 .

Carbon Aerogels as Catalyst Supports and First Insights on Their Durability in Proton Exchange Membrane Fuel Cells

P. Achard, S. Berthon-Fabry, C. Beauger, 2011 .

Correlations between the catalytic layer composition, the relative humidity and the performance for PEMFC carbon aerogel based membrane electrode assemblies

P. Achard, S. Berthon-Fabry, C. Beauger, 2014 .

Efficient Pt/carbon electrocatalysts for proton exchange membrane fuel cells: Avoid chloride-based Pt salts!

F. Maillard, N. Job, S. Berthon-Fabry, 2013 .

Electrochemical characterization of Pt/carbon xerogel and Pt/carbon aerogel catalysts: first insights into the influence of the carbon texture on the Pt nanoparticle morphology and catalytic activity

J. Pirard, F. Maillard, N. Job, 2008, Journal of Materials Science.

Influence of carbon aerogel texture on PEMFC performances

P. Achard, S. Berthon-Fabry, M. Chatenet, 2008 .

Cellulose-based aerogels

P. Achard, F. Fischer, R. Pirard, 2006 .

Synthesis of carbon nanospheres for the development of inkjet-printed resistive layers and sensors

S. Blayac, R. Vié, S. Berthon-Fabry, 2016 .

Tin dioxide coated carbon materials as an alternative catalyst support for PEMFCs: Impacts of the intrinsic carbon properties and the synthesis parameters on the coating characteristics

R. Metkemeijer, F. Maillard, K. Guérin, 2018, Microporous and Mesoporous Materials.

Anisotropic high-surface-area carbon aerogels

P. Achard, D. Djurado, S. Berthon-Fabry, 2004 .

Relationship between tin environment of SnO2 nanoparticles and their electrochemical behaviour in a lithium ion battery

J. Labbé, K. Guérin, S. Berthon-Fabry, 2021 .

Influence of the synthesis parameters on the proton exchange membrane fuel cells performance of Fe–N–C aerogel catalysts

D. Gianolio, M. Sougrati, S. Rojas, 2021, Journal of Power Sources.

One-Pot Synthesis of Fe-N-Containing Carbon Aerogel for Oxygen Reduction Reaction

Youling Wang, S. Berthon-Fabry, Sandrine Berthon-Fabry, 2020, Electrocatalysis.

Proton Exchange Membrane Fuel Cell with enhanced durability using fluorinated carbon as electrocatalyst

K. Guérin, S. Berthon-Fabry, M. Chatenet, 2016 .

Modulating the Fe–N4 Active Site Content by Nitrogen Source in Fe–N–C Aerogel Catalysts for Proton Exchange Membrane Fuel Cell

M. Mermoux, F. Maillard, M. Sougrati, 2023, ACS Catalysis.

First Insight into Fluorinated Pt/Carbon Aerogels as More Corrosion-Resistant Electrocatalysts for Proton Exchange Membrane Fuel Cell Cathodes

K. Guérin, S. Berthon-Fabry, M. Chatenet, 2015, Electrocatalysis.

Cellulose-based nanostructured carbons for energy conversion and storage devices

B. Simon, T. Budtova, S. Berthon-Fabry, 2013 .

New nanostructured carbons based on porous cellulose: Elaboration, pyrolysis and use as platinum nanoparticles substrate for oxygen reduction electrocatalysis

Tatiana Budtova, Marian Chatenet, Arnaud Rigacci, 2008 .

Use of cellulose-based carbon aerogels as catalyst support for PEM fuel cell electrodes: Electrochemical characterization

P. Achard, F. Fischer, S. Berthon-Fabry, 2007 .

Lightweight superinsulating Resorcinol-Formaldehyde-APTES benzoxazine aerogel blankets for space applications

S. Berthon-Fabry, C. Hildenbrand, Pierre Ilbizian, 2016 .

Activity and Durability of Platinum-Based Electrocatalysts with Tin Oxide–Coated Carbon Aerogel Materials as Catalyst Supports

R. Metkemeijer, K. Guérin, S. Berthon-Fabry, 2019, Electrocatalysis.

Advances in tailoring the water content in porous carbon aerogels using RT-pulsed fluorination

M. Dubois, K. Guérin, S. Berthon-Fabry, 2020 .

Fluorination and its Effects on Electrocatalysts for Low‐Temperature Fuel Cells

M. Dubois, Gaixia Zhang, K. Guérin, 2023, Advanced Energy Materials.

Inkjet printing of 200 nm monodisperse carbon nanoparticles: From nanoparticles synthesis to smart ink formulation

S. Blayac, R. Vié, S. Berthon-Fabry, 2013 .

Preparation of highly loaded Pt/carbon xerogel catalysts for Proton Exchange Membrane fuel cells by the Strong Electrostatic Adsorption method

C. Gommes, J. Pirard, F. Maillard, 2010 .

Carbon xerogels as catalyst supports for PEM fuel cell cathode

Patrick Achard, Stéphanie Lambert, Nathalie Job, 2008 .

Utilization of graphitized and fluorinated carbon as platinum nanoparticles supports for application in proton exchange membrane fuel cell cathodes

E. Ticianelli, F. Maillard, K. Guérin, 2018, Journal of Power Sources.

Highly loaded Pt/carbon xerogel catalysts for PEM fuel cells by the Strong Electrostatic Adsorption Method

C. Gommes, J. Pirard, N. Job, 2008 .

Highly porous PEM fuel cell cathodes based on low density carbon aerogels as Pt-support: Experimental study of the mass-transport losses

P. Achard, Julien Marie, S. Berthon-Fabry, 2009 .

Functionalisation and chemical characterisation of cellulose-derived carbon aerogels

P. Achard, N. Job, S. Berthon-Fabry, 2010 .

Nanoporous carbon materials: Comparison between information obtained by SAXS and WAXS and by gas adsorption

P. Achard, D. Djurado, D. Fairen-jimenez, 2005 .

Highly dispersed platinum on carbon aerogels as supported catalysts for PEM fuel cell-electrodes: comparison of two different synthesis paths

P. Achard, Julien Marie, S. Berthon-Fabry, 2004 .

Doped TiO2 aerogels as alternative catalyst supports for proton exchange membrane fuel cells: A comparative study of Nb, V and Ta dopants

S. Berthon-Fabry, C. Beauger, L. Guetaz, 2016 .

TiO2:Nb aerogels, how sol-gel parameters can direct the synthesis route towards an optimization of catalyst support for PEMFC

S. Berthon-Fabry, A. Rigacci, C. Beauger, 2016 .

Carbon xerogels as supports for catalysts and electrocatalysts

J. Pirard, F. Maillard, N. Job, 2009 .

Nanostructured Carbons as Platinum Catalyst Supports for Proton Exchange Membrane Fuel Cell Electrodes

J. Pirard, N. Job, Julien Marie, 2009 .