H. Copur

发表

Cuttability and drillability studies towards predicting performance of mechanical miners excavating in hyperbaric conditions of deep seafloor mining

L. Ozdemir, C. Balci, H. Copur, 2020, International Journal of Rock Mechanics and Mining Sciences.

Specific energy as a criterion for the use of rapid excavation systems in Turkish mines

H. Copur, N. Bilgin, H. Tunçdemir, 2001 .

A set of indices based on indentation tests for assessment of rock cutting performance and rock properties

C. Balci, H. Copur, N. Bilgin, 2003 .

Some geological and geotechnical factors affecting the performance of a roadheader in an inclined tunnel

H. Copur, N. Bilgin, T. Dinçer, 2004 .

Estimation of optimum specific energy based on rock properties for assessment of roadheader performance

C. Balci, H. Copur, H. Tunçdemir, 2004 .

Control of rock cutting efficiency by muck size

Cemal Balci, Nuh Bilgin, H. Tuncdemir, 2008 .

Investigation into the Effects of Textural Properties on Cuttability Performance of a Chisel Tool

S. Er, C. Balci, H. Copur, 2017, Rock Mechanics and Rock Engineering.

Difficult ground conditions dictating selection of TBM type in Istanbul

H. Copur, Cemal Balci, Nuh Bilgin, 2016 .

Surface settlement predictions for Istanbul Metro tunnels excavated by EPB-TBM

H. Copur, S. G. Ercelebi, I. Ocak, 2011 .

Probe drilling ahead of TBMs in difficult ground conditions

C. Balci, H. Copur, N. Bilgin, 2016 .

ROADHEADER APPLICATIONS IN MINING AND TUNNELING

Jamal Rostami, H. Copur, L. Ozdemir, 1998 .

A RESEARCH ON THE CONTROLLED ATMOSPHERE (CA) STORAGE OF LETTUCE

H. Copur, M. Özgür, A. Eriş, 1994 .

Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results

H. Copur, Cemal Balci, Nuh Bilgin, 2006 .

Empirical modeling for predicting excavation performance of EPB TBM based on soil properties

H. Copur, E. Avunduk, H. Copur, 2018 .

Estimating torque, thrust and other design parameters of different type TBMs with some criticism to TBMs used in Turkish tunneling projects

H. Copur, Nuh Bilgin, Ugur Ates, 2014 .

Field and laboratory studies on natural stones leading to empirical performance prediction of chain saw machines

H. Copur, D. Tumac, Cemal Balci, 2011 .

Linear stone cutting tests with chisel tools for identification of cutting principles and predicting performance of chain saw machines

H. Copur, H. Copur, 2010 .

Predicting performance of EPB TBMs by using a stochastic model implemented into a deterministic model

H. Copur, D. Tumac, Cemal Balci, 2014 .

The performance prediction of impact hammers from Schmidt hammer rebound values in Istanbul metro tunnel drivages

H. Copur, Nuh Bilgin, T. Dincer, 2002 .

Effect of Clogging on EPB TBM Performance: A Case Study in Akfirat Waste Water Tunnel, Turkey

H. Copur, E. Avunduk, 2019, Geotechnical and Geological Engineering.

A case study on the methane explosion in the excavation chamber of an EPB-TBM and lessons learnt including some recent accidents

H. Copur, Nuh Bilgin, Muammer Cinar, 2011 .

Suggestion of new models for predicting performance of raise boring machines based on indentation tests

C. Balci, H. Copur, D. Tumac, 2023, Tunnelling and Underground Space Technology.

Full-Scale linear cutting tests using a button cutter and deterministic performance prediction modeling for raise boring machines

C. Balci, H. Copur, D. Tumac, 2022, Tunnelling and Underground Space Technology.

Effect of replacing disc cutters with chisel tools on performance of a TBM in difficult ground conditions

H. Copur, Cemal Balci, Nuh Bilgin, 2012 .

Effects of Different Cutting Patterns and Experimental Conditions on the Performance of a Conical Drag Tool

Cemal Balci, Nuh Bilgin, Deniz Tumac, 2017, Rock Mechanics and Rock Engineering.