D. Tumac

发表

Rock cuttability assessment using the concept of hybrid dynamic hardness (HDH)

R. M. Goktan, N. Yılmaz, D. Tumac, 2015, Bulletin of Engineering Geology and the Environment.

Predicting the Performance of Chain Saw Machines Based on Shore Scleroscope Hardness

Deniz Tumac, D. Tumac, 2014, Rock Mechanics and Rock Engineering.

Investigations into the cutting characteristics of CCS type disc cutters and the comparison between experimental, theoretical and empirical force estimations

D. Tumac, Cemal Balci, C. Balci, 2015 .

Investigation into the Effects of Textural Properties on Cuttability Performance of a Chisel Tool

S. Er, C. Balci, H. Copur, 2017, Rock Mechanics and Rock Engineering.

Double shield TBM performance analysis in difficult ground conditions: a case study in the Gerede water tunnel, Turkey

Aydin Shaterpour-Mamaghani, Deniz Tumac, Emre Avunduk, 2016, Bulletin of Engineering Geology and the Environment.

Field and laboratory studies on natural stones leading to empirical performance prediction of chain saw machines

H. Copur, D. Tumac, Cemal Balci, 2011 .

Investigation into the effects of different rocks on rock cuttability by a V-type disc cutter

D. Tumac, Cemal Balci, C. Balci, 2012 .

Predicting performance of EPB TBMs by using a stochastic model implemented into a deterministic model

H. Copur, D. Tumac, Cemal Balci, 2014 .

Predicting the performance of large diameter circular saws based on Schmidt hammer and other properties for some Turkish carbonate rocks

D. Tumac, D. Tumac, 2015 .

Prediction of roadheader performance by artificial neural network

D. Tumac, E. Avunduk, A. K. Atalay, 2014 .

Estimation of Rock Cuttability from Shore Hardness and Compressive Strength Properties

H. Ergin, D. Tumac, C. Feridunoglu, 2007 .

Selection of roadheaders by fuzzy multiple attribute decision making method

O. Acaroglu, D. Tumac, C. Feridunoglu, 2006 .

Predicting performance of impact hammers from rock quality designation and compressive strength properties in various rock masses

D. Tumac, Shahabedin Hojjati, D. Tumac, 2016 .

Suggestion of new models for predicting performance of raise boring machines based on indentation tests

C. Balci, H. Copur, D. Tumac, 2023, Tunnelling and Underground Space Technology.

Full-Scale linear cutting tests using a button cutter and deterministic performance prediction modeling for raise boring machines

C. Balci, H. Copur, D. Tumac, 2022, Tunnelling and Underground Space Technology.

Estimating specific energy from the brittleness indexes in cutting metallic ores

S. Kahraman, C. Balci, D. Tumac, 2016 .

Effects of Different Cutting Patterns and Experimental Conditions on the Performance of a Conical Drag Tool

Cemal Balci, Nuh Bilgin, Deniz Tumac, 2017, Rock Mechanics and Rock Engineering.