L. Arnaud

发表

SUPPRESSION OF PERIOD DOUBLING CHATTER IN HIGH-SPEED MILLING BY SPINDLE SPEED VARIATION

Gilles Dessein, Tamás Insperger, Grégoire Peigné, 2011 .

The variational theory of complex rays for the calculation of medium‐frequency vibrations

P. Ladevèze, L. Arnaud, C. Blanzé, 2001 .

Control of Chatter by Spindle Speed Variation in High-Speed Milling

Gilles Dessein, Tamás Insperger, Sébastien Seguy, 2010 .

On the stability of high-speed milling with spindle speed variation

Gilles Dessein, Tamás Insperger, Grégoire Peigné, 2010 .

Investigating the influence of the grain size and distribution on the macroscopic dielectric properties of Antarctic firn

M. Bittelli, R. Olmi, L. Arnaud, 2021 .

Mechanical fatigue assessment of SAC305 solder joints under harmonic and random vibrations

L. Arnaud, O. Dalverny, J. Alexis, 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE).

The cooling efficiency of s‐CO₂ microchannel heat sink compared with a water‐based design

L. Arnaud, K. Hooman, Navid Dehdashti Akhavan, 2022, Mathematical Methods in the Applied Sciences.

Review of AI-based methods for chatter detection in machining based on bibliometric analysis

B. Kamsu-Foguem, L. Arnaud, C. A. K. Kounta, 2022, The International Journal of Advanced Manufacturing Technology.

Toolpath dependent stability lobes for the milling of thin-walled parts

Gilles Dessein, Francisco J. Campa, Sébastien Seguy, 2008 .

Microstructural evolutions of Sn-3.0Ag-0.5Cu solder joints during thermal cycling

Olivier Dalverny, J. B. Libot, Joël Alexis, 2018, Microelectron. Reliab..

Mechanical fatigue assessment of SAC305 solder joints under harmonic vibrations

J. B. Libot, L. Arnaud, P. Milesi, 2016, 2016 International Conference on Electronics Packaging (ICEP).

Topological optimization design for additive manufacturing, taking into account flexion and vibrations during machining post processing operations

Maher Baili, Jean-Pierre Faye, Lionel Arnaud, 2018 .

Experimental SAC305 Shear Stress–Strain Hysteresis Loop Construction Using Hall's One-Dimensional Model Based on Strain Gages Measurements

L. Arnaud, J. Alexis, P. Milesi, 2019, Journal of Electronic Packaging.

Experimental Strain Energy Density Dissipated in SAC305 Solder Joints During Different Thermal Cycling Conditions Using Strain Gages Measurements

L. Arnaud, O. Dalverny, J. Alexis, 2018, 2018 IEEE 68th Electronic Components and Technology Conference (ECTC).

Libot, Jean-Baptiste and Alexis, Joël and Arnaud, Lionel and Dalverny, Olivier and Milesi, Philippe and Dulondel, Frédéric Experimental strain energy density dissipated in SAC305 solder joints during different thermal cycling

L. Arnaud, O. Dalverny, P. Milesi, 2018 .

Surface roughness variation of thin wall milling, related to modal interactions

Gilles Dessein, Sébastien Seguy, Lionel Arnaud, 2008 .

Integration of dynamic behaviour variations in the stability lobes method: 3D lobes construction and application to thin-walled structure milling

Gilles Dessein, Vincent Thevenot, Lionel Arnaud, 2006 .

INFLUENCE OF MATERIAL REMOVAL ON THE DYNAMIC BEHAVIOR OF THIN-WALLED STRUCTURES IN PERIPHERAL MILLING

Gilles Dessein, Lionel Arnaud, Vincent Thevenot, 2004 .

Deep learning for the detection of machining vibration chatter

B. Kamsu-Foguem, L. Arnaud, C. A. K. Kounta, 2023, Adv. Eng. Softw..

Chatter in interrupted turning with geometrical defects: an industrial case study

T. Insperger, S. Seguy, L. Arnaud, 2014, The International Journal of Advanced Manufacturing Technology.

Chatter in interrupted turning with geometrical defects: an industrial case study

Tamás Insperger, Sébastien Seguy, Lionel Arnaud, 2014 .

Chatter milling modeling of active magnetic bearing spindle in high-speed domain

Sébastien Seguy, Lionel Arnaud, Etienne Gourc, 2011 .

Simulation of low rigidity part machining applied to thin-walled structures

Grégoire Peigné, Sébastien Seguy, Oscar Gonzalo, 2011 .

Chatter control by spindle speed variation in high-speed milling

Gilles Dessein, Tamás Insperger, Sébastien Seguy, 2009 .

Critical Thickness and Dynamic Stiffness for Chatter Avoidance in Thin Floors Milling

Aitzol Lamikiz, L. N. López de Lacalle, Sébastien Seguy, 2011 .

Stable Milling of Thin-Walled Parts with Variable Dynamics

L. N. López de Lacalle, S. Seguy, F. J. Campa, 2008 .

Design for additive manufacturing including machining constraints: A case study of topology optimization including machining forces

Maher Baili, Lionel Arnaud, Vincent Benoist, 2019 .

Mechanical evolution of concrete during setting

L. Arnaud, S. Thinet, 2003 .

A new method of design for additive manufacturing including machining constraints

Maher Baili, Vincent Benoist, Lionel Arnaud, 2020, The International Journal of Advanced Manufacturing Technology.

Numerical modelling of parts distortion and beam supports breakage during selective laser melting (SLM) additive manufacturing

P. Selva, L. Arnaud, A. Tongne, 2022, The International Journal of Advanced Manufacturing Technology.

Application of the Stability Lobes Theory to Milling of Thin Workpieces

Gilles Dessein, Lionel Arnaud, G. Dessein, 2003 .

A new computational method for structural vibrations in the medium-frequency range

L. Arnaud, P. Ladeveze, P. Ladevèze, 2000 .

Global-to-local simulation of the thermal history in the laser powder bed fusion process based on a multiscale finite element approach

M. Baili, L. Arnaud, A. Tongne, 2023, The International Journal of Advanced Manufacturing Technology.

Identifying main contamination factors of laser powder bed fusion oxidation-sensitive powders

M. Baili, L. Arnaud, A. Tongne, 2023, The International Journal of Advanced Manufacturing Technology.