N. Kotkunde

发表

Prediction of fracture limits of Ni–Cr based alloy under warm forming condition using ductile damage models and numerical method

Chetan P. Nikhare, Swadesh Kumar Singh, Ambuj Saxena, 2021, Transactions of Nonferrous Metals Society of China.

Constitutive Modeling of High-Temperature Flow Stress of Armor Steel in Ballistic Applications: A Comparative Study

A. Kumaraswamy, Ambuj Saxena, N. Kotkunde, 2019, Journal of Materials Engineering and Performance.

Modeling of surface roughness in wire electrical discharge machining of Inconel 718 using artificial neural network

B. K. Patle, N. S. Reddy, U. Paturi, 2020 .

Parameter optimisation in V-bending process at elevated temperatures to minimise spring back in Ti-6Al-4V alloy

M. A. Wahed, S. Singh, N. Kotkunde, 2020 .

Influence of material modeling on warm forming behavior of nickel based super alloy

Swadesh Kumar Singh, Ayush Morchhale, Anand Badrish, 2020 .

Prediction of flow stress behaviour by materials modelling technique for Inconel 718 alloy at elevated temperature

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2020 .

Analysis of material properties and strain hardening behaviour of brass at different temperature and quasi-static strain rate conditions

Vikram Singh, Swadesh Kumar Singh, N. Kotkunde, 2021, Advances in Materials and Processing Technologies.

Influence of processing temperature on formability of thin-rolled DP590 steel sheet

Swadesh Kumar Singh, Ayush Morchhale, N. Kotkunde, 2020 .

Comparative assessment of failure strain predictions using ductile damage criteria for warm stretch forming of IN718 alloy

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2020, International Journal of Material Forming.

Effects of deformation parameters and stress triaxiality on the fracture behaviors and microstructural evolution of an Al-Zn-Mg-Cu alloy

Y. Lin, N. Kotkunde, Yi-Wei Xiao, 2020 .

Finite element analysis of spring back in Ti-6Al-4V alloy

M. A. Wahed, S. Singh, A. Gupta, 2019, Materials Today: Proceedings.

Experimental and Numerical Investigations on Hot Deformation Behavior and Processing Maps for ASS 304 and ASS 316

Swadesh Kumar Singh, N. Kotkunde, H. N. Krishnamurthy, 2018, High Temperature Materials and Processes.

Investigation of fracture forming limits of dual phase steel under warm incremental forming process

Swadesh Kumar Singh, N. Kotkunde, K. Suresh, 2022, International Journal on Interactive Design and Manufacturing (IJIDeM).

Effect of Graphene Nanoplatelets on the Mechanical Properties of Aluminium Metal Matrix Composite

R. Sujith, N. Kotkunde, K. Suresh, 2019, Materials Today: Proceedings.

Conceptualisation of biaxial tensile test setup for sheet metal forming application using fuzzy analytical network process

Swadesh Kumar Singh, Ambuj Saxena, N. Kotkunde, 2020, Advances in Materials and Processing Technologies.

Deformation behaviour and formability analysis of thin brass sheet: experiments and modelling

Vikram Singh, Swadesh Kumar Singh, N. Kotkunde, 2022, Australian Journal of Mechanical Engineering.

Forming and fracture limits of IN718 alloy at elevated temperatures: Experimental and theoretical investigation

Y. Lin, Swadesh Kumar Singh, Y. Lin, 2020 .

Stretch flanging behaviour and microstructural analysis of DP steel using punch stretching and incremental forming processes

Swadesh Kumar Singh, Ayush Morchhale, N. Kotkunde, 2022, Archives of Civil and Mechanical Engineering.

Experimental Determination and Theoretical Prediction of Limiting Strains for ASS 316L at Hot Forming Conditions

Swadesh Kumar Singh, Ayush Morchhale, N. Kotkunde, 2020, Journal of Materials Engineering and Performance.

Parameter Optimization in the Thermo-mechanical V-Bending Process to Minimize Springback of Inconel 625 Alloy

Swadesh Kumar Singh, Ayush Morchhale, Anand Badrish, 2020 .

Warm deep drawing behavior of Inconel 625 alloy using constitutive modelling and anisotropic yield criteria

Swadesh Kumar Singh, Ayush Morchhale, Anand Badrish, 2020, International Journal of Material Forming.

Prediction capability of anisotropic yielding behaviour for DP590 steel at elevated temperatures

Swadesh Kumar Singh, Ayush Morchhale, N. Kotkunde, 2020 .

Constitutive Model and Processing Maps for a Ti‐55511 Alloy in β Region

Y. Lin, N. Kotkunde, D. He, 2019, Advanced Engineering Materials.

Hot tensile properties, microstructure evolution and fracture mechanisms of Ti-6Al-4V alloy with initial coarse equiaxed phases

Y. Lin, Xiaoyong Zhang, N. Kotkunde, 2020 .

Influence Of Temperatures And Strain Rates On Tensile Deformation Behaviour Of DP 590 Steel

Swadesh Kumar Singh, N. Kotkunde, A. Haq, 2019, Materials Today: Proceedings.

Comparative study of constitutive modeling for Ti–6Al–4V alloy at low strain rates and elevated temperatures

Nitin Kotkunde, Aditya D. Deole, Swadesh Kumar Singh, 2014 .

Microstructure study and constitutive modeling of Ti–6Al–4V alloy at elevated temperatures

Amit Gupta, Nitin Kotkunde, Swadesh Kumar Singh, 2014 .

Study of Hot Deformation Behavior Using Phenomenological Based Constitutive Model for Austenitic Stainless Steel 316

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2018 .

Material characterization, constitutive modelling, and processing map for superplastic deformation region in Ti-6Al-4V alloy

M. A. Wahed, S. Singh, N. Kotkunde, 2019, The International Journal of Advanced Manufacturing Technology.

Flow Stress Prediction of Ti-6Al-4V Alloy at Elevated Temperature Using Artificial Neural Network

Swadesh Kumar Singh, Aditya Balu, Nitin Kotkunde, 2014 .

Experimental and theoretical investigation of forming limit diagram for Ti-6Al-4 V alloy at warm condition

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2017 .

Microstructure Characteristics and Comparative Analysis of Constitutive Models for Flow Stress Prediction of Inconel 718 Alloy

Y. Lin, Swadesh Kumar Singh, A. Gupta, 2019, Journal of Materials Engineering and Performance.

Analysis of Hot Anisotropic Tensile Flow Stress and Strain Hardening Behavior for Inconel 625 Alloy

Swadesh Kumar Singh, N. Kotkunde, K. Mahesh, 2019 .

Influence of material models on theoretical forming limit diagram prediction for Ti–6Al–4V alloy under warm condition

Amit Gupta, Nitin Kotkunde, Sashank Srinivasan, 2016 .

Flow stress and work hardening behaviour of Mg-3Al-1Zn alloy

Swadesh Kumar Singh, Ayush Morchhale, N. Kotkunde, 2022, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Strain hardening behavior of DP 590 steel using dislocation density based Kock-Mecking model

N. Kotkunde, Sandeep Pandre, Varun Mhatre, 2020 .

Experimental and Numerical Investigations of Johnson Cook Constitutive Model for Hot Flow Stress Prediction of Inconel 625 Alloy

Swadesh Kumar Singh, Nitin Kotkunde, C. Anand Badrish, 2019, ICCMS 2019.

Neural network modeling for anisotropic mechanical properties and work hardening behavior of Inconel 718 alloy at elevated temperatures

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2019, Journal of Materials Research and Technology.

Determination of Warm Deep Drawing Behavior of DP590 Steel Using Numerical Modeling and Experimental Process Window

Swadesh Kumar Singh, Ambuj Saxena, Ayush Morchhale, 2021, Arabian Journal for Science and Engineering.

Flow Stress Behavior, Constitutive Modeling, and Microstructural Characteristics of DP 590 Steel at Elevated Temperatures

Swadesh Kumar Singh, R. Sujith, Ayush Morchhale, 2019, Journal of Materials Engineering and Performance.

Prediction of Forming Limit Diagram for Ti-6Al-4V Alloy Using Artificial Neural Network

A. Gupta, N. Kotkunde, A. Deole, 2014 .

High temperatures deformation and formability behavior of DP590 steel: mechanical characterization and modeling

Swadesh Kumar Singh, N. Kotkunde, Gauri Mahalle, 2021, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

Influence of material modeling on warm forming behavior of nickel based super alloy

Swadesh Kumar Singh, Ayush Morchhale, Anand Badrish, 2020, International Journal of Material Forming.

Machinability analysis of nickel-based superalloy Nimonic 90: a comparison between wet and LCO2 as a cryogenic coolant

N. Kotkunde, Navneet Khanna, M. Gupta, 2021, The International Journal of Advanced Manufacturing Technology.

An improved M–K model coupled with different ductile criteria for fracture limit predictions of Inconel 718 alloy

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2021 .

Prediction of forming limits and microstructural evolution during warm stretch forming of DP590 steel

Swadesh Kumar Singh, Ayush Morchhale, N. Kotkunde, 2021, Archives of Civil and Mechanical Engineering.

Experimental and theoretical investigation of forming limit diagram for Ti-6Al-4 V alloy at warm condition

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2015, International Journal of Material Forming.

Numerical investigations of fracture parameters for a cracked hydraulic cylinder barrel and its redesign

Nitin Kotkunde, V. N. Balavignesh, Badrinath Balasubramaniam, 2017 .

Processing of DP590 steel using single point incremental forming for automotive applications

Ayush Morchhale, N. Kotkunde, Suresh Kurra, 2021, Materials and Manufacturing Processes.

Prediction of fracture limits of IN625 alloy by coupling ductile damage models and anisotropic yielding functions with the classical Marciniak and Kuczyński model

Swadesh Kumar Singh, Ayush Morchhale, N. Kotkunde, 2021, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

A critical analysis of formability and quality parameters for forming a dome shape using multi-stage strategies in incremental forming process

N. Kotkunde, K. Suresh, Praveen Kumar Gandla, 2022, Journal of Materials Research and Technology.

Analysis of formability in incremental forming processes

A. Priyadarshini, N. Kotkunde, K. Suresh, 2018 .

Prediction of flow stress using integrated JC-ZA constitutive model for Inconel 625 alloy

Swadesh Kumar Singh, Ayush Morchhale, N. Kotkunde, 2020 .

Warm deep drawing behavior of Inconel 625 alloy using constitutive modelling and anisotropic yield criteria

Swadesh Kumar Singh, Ayush Morchhale, Anand Badrish, 2019, International Journal of Material Forming.

Analysis of earing behaviour in deep drawing of ASS 304 at elevated temperature

Swadesh Kumar Singh, Nitin Kotkunde, Amit Kumar Gupta, 2016 .

Experimental and Finite Element Studies of Stretch Forming Process for Ti-6Al-4V Alloy at Elevated Temperature

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2017 .

Experimental and numerical investigation of anisotropic yield criteria for warm deep drawing of Ti–6Al–4V alloy

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2014 .

A computational investigation on the influence of the l/d ratio and strain rate on the deformation behavior of rolled and homogeneous armor steel in the split Hopkinson pressure bar test process

S. Dwivedi, Ambuj Saxena, N. Kotkunde, 2021, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Failure and formability studies in warm deep drawing of Ti–6Al–4V alloy

Nitin Kotkunde, Aditya D. Deole, Swadesh Kumar Singh, 2014 .

Fmea Analysis on Offshore Wind Turbines Using Fuzzy Multimooramethod

N. Kotkunde, M. Chauhan, Karthick Chetti, 2021 .

Development of Modified Arrhenius Model for Ti-6al-4v Alloy to Predict the Flow Stress

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2013 .

Effect of anisotropy on mechanical properties of Ti-6Al-4V in superplastic region

N. Kotkunde, M. Wahed, SK Singh, 2018 .

Numerical Analysis of Warm Deep Drawing for Ti–6Al–4V Alloy

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2015 .

Numerical Evaluation of Stress Intensity Factor for Inclined-Edge Crack Geometry using Singularity Elements

N. Kotkunde, N. Tatke, 2013 .

Flow stress behaviour prediction of 92W-5Co-3Ni alloy using various machine learning models

Swadesh Kumar Singh, N. Kotkunde, Suswanth Poluru, 2024, Advances in Materials and Processing Technologies.

Fracture limit analysis of DP590 steel using single point incremental forming: experimental approach, theoretical modeling and microstructural evolution

Swadesh Kumar Singh, Ayush Morchhale, N. Kotkunde, 2021, Archives of Civil and Mechanical Engineering.

Studies on flow stress behaviour prediction of AZ31B alloy: Microstructural evolution and fracture mechanism

Swadesh Kumar Singh, N. Kotkunde, K. Saxena, 2023, Journal of Materials Research and Technology.

Hot Tensile Rate-Dependent Deformation Behaviour of AZ31B Alloy Using Different Johnson–Cook Constitutive Models

Swadesh Kumar Singh, N. Kotkunde, Aarjoo Jaimin, 2023, Arabian Journal for Science and Engineering.

Analysis of Hot Workability of Inconel Alloys Using Processing Maps

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2019, Lecture Notes on Multidisciplinary Industrial Engineering.

Cowper-Symonds Strain Hardening Model For Flow Behaviour Of Inconel 718 Alloy

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2019, Materials Today: Proceedings.

Study of Khan-Huang-Liang (KHL) Anisotropic Deformation Model for Deep Drawing Behaviour of Inconel 718 Alloy

Swadesh Kumar Singh, N. Kotkunde, Gauri Mahalle, 2020, IOP Conference Series: Materials Science and Engineering.

Analysis of Forming Limit Diagram for Ti-6Al-4 V Alloy

A. Gupta, N. Kotkunde, 2015 .

Analysis of Tensile Deformation Behaviour of Dual Phase -590 Steel at Different Temperatures and Strain Rates

Swadesh Kumar Singh, N. Kotkunde, B. B. Naik, 2021, Advances in Materials and Processing Technologies.

An improved Johnson–Cook constitutive model for flow stress prediction of 92W–5Co–3Ni alloy

Swadesh Kumar Singh, N. Kotkunde, Suswanth Poluru, 2024, Archives of Civil and Mechanical Engineering.

Integrated Johnson–Cook and Zerilli–Armstrong constitutive model for flow-stress prediction of AZ31B alloy

Swadesh Kumar Singh, N. Kotkunde, Gauri Mahalle, 2023, Advances in Materials and Processing Technologies.

Analysis of Flow Stress Behaviour of Inconel Alloys at Elevated Temperatures Using Constitutive Model

Swadesh Kumar Singh, A. Gupta, N. Kotkunde, 2018, Journal of Physics: Conference Series.

A comparative study on the effect of grid printing methods and camera hardware in automatic strain measurement through CGA

A. Priyadarshini, N. Kotkunde, Suresh Kurra, 2022, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.