Y. Z. Erdil

发表

Holding strength of screws in plywood and oriented strandboard

Y. Z. Erdil, Jilei Zhang, C. Eckelman, 2002 .

Effects of wood species, number of teeth, and adhesive type on moment capacities of box-joints

Y. Z. Erdil, Selçuk Demirci, Harun Diler, 2020, BioResources.

Improvement of technological properties of wood plastic composites reinforced with glass and carbon fibre fabric

Y. Z. Erdil, S. Durmaz, Erkan Avcı, 2021, Polymers and Polymer Composites.

Screw Withdrawal Resistance and Surface Roughness of Woven Carbon and Glass Fiber-reinforced Wood-plastic Composites

Y. Z. Erdil, S. Durmaz, Erkan Avcı, 2020 .

Utilizing Poppy Husk-based Particleboards as an Alternative Material in Case Furniture Construction

Y. Z. Erdil, Ali Kasal, Mustafa Kucuktuvek, 2016 .

Effect of laboratory-accelerated aging treatment on the ultimate strength of a 4-sided MDF kitchen cabinet

Y. Z. Erdil, A. Enayati, Ali Fathollahzadeh, 2013 .

Accelerated weathering performance of wood‐plastic composites reinforced with carbon and glass fibre‐woven fabrics

Y. Z. Erdil, S. Durmaz, Ozlem Ozgenc, 2021, Coloration Technology.

Comparison of mechanical properties of solid wood and laminated veneer lumber fabricated from Turkish beech, Scotch pine, and Lombardy poplar

Y. Z. Erdil, Jilei Zhang, Ali Kasal, 2009 .

Effects of cross-sectional shape on the bending strength in furniture joints

Y. Z. Erdil, Harun Diler, M. Acar, 2018, Kastamonu University Journal of Forestry Faculty.

INVESTIGATING THE USE OF VINE PRUNING STALKS (VITIS VINIFERA L. CV. SULTANI) AS RAW MATERIAL FOR PARTICLEBOARD MANUFACTURING

M. Alma, Y. Z. Erdil, Mehmet Yeniocak, 2014 .

Staple holding strength of furniture frame joints constructed of plywood and oriented strandboard

Yusuf Ziya Erdil, Carl A. Eckelman, Jilei Zhang, 2003 .

Effects of the panel and fastener type on bending moment capacity of L-type joints for furniture cases.

Y. Z. Erdil, M. Yüksel, Ali Kasal, 2015 .

Estimation equations for moment resistances of L-type screw corner joints in case goods furniture

Ali Kasal, Yusuf Ziya Erdil, Erkan Avci, 2008 .

Effect of the Panel Type and Panel Thickness on Moment Resistance of Screw-Jointed Corner Joints and Stiffness of Four-Member Cabinets

Y. Z. Erdil, M. Yüksel, Selçuk Demirci, 2014 .

Bending moment capacity of rectangular mortise and tenon furniture joints

Y. Z. Erdil, C. Eckelman, Ali Kasal, 2005 .

Withdrawal and bending strength of dowel-nuts in plywood and oriented strandboard

Yusuf Ziya Erdil, Carl A. Eckelman, Jilei Zhang, 2003 .

Moment capacity of traditional and alternative T-type end-to-side-grain furniture joints

Jilei Zhang, Ali Kasal, Yusuf Ziya Erdil, 2005 .

Effect of cross holes on the strength of chair and table legs

Y. Z. Erdil, C. Eckelman, E. Haviarova, 2002 .

Numerical Analyses of Various Sizes of Mortise and Tenon Furniture Joints

Jerzy Smardzewski, Ali Kasal, Tolga Kuşkun, 2016 .

Bending Moment Capacities of L-Shaped Mortise and Tenon Joints under Compression and Tension Loadings

Ali Kasal, Eva Haviarova, Yusuf Ziya Erdil, 2015 .

EFFECT OF ADHESIVE TYPE AND TENON SIZE ON BENDING MOMENT CAPACITY AND RIGIDITY OF T-SHAPED FURNITURE JOINTS CONSTRUCTED OF TURKISH BEECH AND SCOTS PINE

Y. Z. Erdil, C. Eckelman, Ali Kasal, 2013 .

Effect of Tenon Geometry, Grain Orientation, and Shoulder on Bending Moment Capacity and Moment Rotation Characteristics of Mortise and Tenon Joints

Y. Z. Erdil, C. Eckelman, A. Ozcifci, 2012 .

Bending moment capacity of round mortise and tenon furniture joints

A. N. Tankut, Y. Z. Erdil, C. Eckelman, 2004 .

Relationship between static and cyclic front to back load capacity of wooden chairs and evaluation of the strength values according to acceptable design values

Halil Kılıç, Y. Z. Erdil, Ali Kasal, 2018, Wood and Fiber Science.

Effect of Tenon Size on Static Front to Back Loading Performance of Wooden Chairs in Comparison with Acceptable Design Loads

Ali Kasal, Tolga Kuşkun, Yusuf Ziya Erdil, 2017 .

Static Front to Back Loading Capacity of Wood Chairs and Relationship between Chair Strength and Individual Joint Strength

Ali Kasal, Tolga Kuşkun, Eva Haviarova, 2016 .

Technical Note: Static Versus Cyclic Load Capacity of Side Chairs Constructed with Mortise and Tenon Joints

Eva Haviarova, Yusuf Ziya Erdil, Carl A. Eckelman, 2013 .

Bending moment resistances of L-shaped furniture frame joints under tension and compression loadings.

Y. Z. Erdil, Selçuk Demirci, Harun Diler, 2020 .

Design and testing of environmentally friendly wood school chairs for developing countries

Y. Z. Erdil, C. Eckelman, E. Haviarova, 2001 .

Theoretical analysis and design of joints in a representative sofa frame constructed of plywood and oriented strandboard

Ali Kasal, Yusuf Ziya Erdil, Carl A. Eckelman, 2008 .

PRODUCT ENGINEERING AND PERFORMANCE TESTING IN RELATION TO STRENGTH DESIGN OF FURNITURE

Eva Haviarova, Yusuf Ziya Erdil, Carl A. Eckelman, 2007 .

Investigations on the effects of Hylotrupes bajulus (L.) and Trichoferus griseus (F.) (Coleoptera: Cerambycidae) damaged on wooden constructions on some mechanical and physical characteristics of wood

Y. Z. Erdil, A. Çolak, H. Civelek, 2006 .

Shear force and bending moment capacities of joints constructed with glued corner blocks

Y. Z. Erdil, C. Eckelman, Ali Kasal, 2006 .