Hiroyasu Iwabe

发表

Review of Research Fruits by the Technical Committees of JSPE. Present and Future of High-Speed Milling.

Hiroyasu Iwabe, Etuo Takeoka, Takashi Miyaguchi, 1998 .

Prediction of Cutting Force in End Milling (Simple Prediction Method by Sperposition).

Hiroyasu Iwabe, Toshihiko Asami, Akihiko Koizumi, 1991 .

504 Study on Cutting Mechanism and Cutting Performance for Inclined Surface by Oval End Mill using 3D-CAD

Hiroyasu Iwabe, Naoto Kawashima, Yuudai Yamada, 2014 .

708 Study on Evaluation of Cutting Performance with Ball End Milling for Inclined Surface using 3D-CAD : Proposal of Cutting Method based on Cutting Mechanism and Cutting Performance

Hiroyasu Iwabe, Tsuyoshi Fujita, Taisuke Hatakeyama, 2011 .

Effect of tool stiffness upon tool wear in high spindle speed milling using small ball end mill

Hiroyasu Iwabe, Takashi Miyaguchi, Masami Masuda, 2001 .

Analysis of Cutting Mechanism by Ball End Mill Using 3D-CAD

Hiroyasu Iwabe, Keisuke Shimizu, Mitunori Sasaki, 2006 .

A selecting method of tool diameter and depths of cut in end milling.

Hiroyasu Iwabe, Li Yong, Yoshiya Fujii, 1990 .

1005 Analysis of Cutting Mechanism and Evaluation of Radius End Mill for Inclined Surface using 3D-CAD

Hiroyasu Iwabe, Masanori Futakawa, Yusaku Kazama, 2012 .

305 Study on High Speed and Complex Machining by Vertical Lathe. : Structure Analysis and Method for High Accuracy using FEM

Hiroyasu Iwabe, Akihiro Gotoh, 2009 .

3358 Study on Evaluation of Cutting Performance with Ball End Mill for Inclined Surface using 3D-CAD : Proposal of Cutting Method based on Analytical and Experimental Results

Hiroyasu Iwabe, Tsuyoshi Fujita, 2011 .

W12-(3) Analysis of Cutting Mechanism and Cutting Performance of Ball End Mill and Oval End Mill for Inclined Surface using 3D-CAD

Hiroyasu Iwabe, 2005 .

1108 Cutting Mechanism and Cutting Performance of Machining for Curved Surface by Ball End Mill using 3D-CAD

Hiroyasu Iwabe, Hideki Miwa, 2005 .

Analysis of Cutting Mechanism and Evaluation of Cutting Performance of Ball End Mill and Oval End Mill Using 3D-CAD

Hiroyasu Iwabe, 岩部洋育, Tsuyoshi Fujita, 2011 .

1122 Study on Cutting Mechanism of Dental Reaming Tool

Hiroyasu Iwabe, Tetsuya Nakamura, Kenichi Saikawa, 2010 .

P-15 Program for Promoting High-Quality University Education, "Pedagogical Strategy for Improving Shallow Thoughts of Undergraduate Students in Their Learning" : An example in the department of mechanical and production engineering

Hiroyasu Iwabe, Shuichi Sakamoto, Takatsune Narumi, 2010 .

Effect of dynamic behaviour of end mill in machining on working accuracy. (2nd report). Mechanism of generating shape error of bottom surface.

Hiroyasu Iwabe, Yoshiya Fujii, 1988 .

C030 Study on Evaluation of Cutting Performance of Ball End Mill with Straight-line Path Method for Inclined Surface Using 3D-CAD : Influence of Feed Direction on Cutting Mechanism

Hiroyasu Iwabe, Tsuyoshi Fujita, 2013 .

Analysis of Cutting Mechanism of Ball End Mill Using 3D-CAD (Chip Area by Inclined Surface Machining and Cutting Performance Based on Evaluation Value)

Hiroyasu Iwabe, Minoru Sasaki, Keisuke Shimizu, 2006 .

Study on Machining Accuracy of Thin Wall Workpiece by End Mill. Analysis of Deflection of Workpiece and Tool due to Cutting Force and Machining Accuracy.

Hiroyasu Iwabe, Kazuhiro Yokoyama, Tomoharu Shimada, 1997 .

High Accurate Machining of Thin Wall Shape Workpiece by End Mill. Proposal of Twin Spindle Type Machining and Some Experiments.

Kazuhiro Yokoyama, Hiroyasu Iwabe, Masaki Mizuochi, 1999 .

132 Study on Tool Life of High Speed Milling of Hardened Steel by Small Size Ball End Mill

Hiroyasu Iwabe, Kensuke Nakanishi, Kouji Yamaguti, 2001 .

Analysis of Cutting Mechanism of Tapered End Mill using 3D-CAD : Transitional Phenomenon at Inside Corner and Loop Path Machining

Hiroyasu Iwabe, Takashi Yokozuka, 2002 .

Establishment of High-Accuracy and High-Efficiency Machining Method for Scroll-Shape Workpiece with End Mill : 1st Report, Proposal of High-Accuracy and High-Efficiency Machining Methods Based on Maximum Chip Area and Surface Roughness

Hiroyasu Iwabe, Tomoharu Shimada, 1995 .

411 Study Program "Technology Week" for Leading Edge Technical Development and Manufacturing in Industry

Masakazu Sengoku, Hiroyasu Iwabe, Yuji Tanabe, 2009 .

Study on improvement of machining accuracy in cornering cut with end mill

Hiroyasu Iwabe, Li Yong, Yoshiya Fujii, 1992 .

Analysis of Deflection of Square End Mill using FEM

Hiroyasu Iwabe, Fujio Tsuchida, 2000 .

Study on Performance of Radius End Milling Titanium Alloy (Analysis of Cutting Cross-Sectional Area Using 3D-CAD and Experiments of Inclined Surface with Contouring)

Hiroyasu Iwabe, Tsuyoshi Fujita, Masanori Futakawa, 2013, Int. J. Autom. Technol..

Study Program “Technology Week” for Leading Edge Technical Development and Manufacturing in Industry

Masakazu Sengoku, Hiroyasu Iwabe, Takashi Sato, 2009 .

Fundamental Study on Cutting Mechanism of Different Helix Angles End Mills. Investigation of Cutting Process based on Cutting Tests by 2-Tooth End Mills.

Hiroyasu Iwabe, 1992 .

720 Study on Machining Accuracy of Hemisphere Surface by Ball End Mill

Hiroyasu Iwabe, Takayuki Hayakawa, 2000 .

Study on High-Speed Machining by End Mill. Accuracy by Contouring and Error Factors.

Hiroyasu Iwabe, Junichi Imai, Kazuhiro Takemoto, 1997 .

Tool Life of Small Diameter Ball End Mill for High Speed Milling of Hardened Steel - Effects of the Machining Method and the Tool Materials -

Hiroyasu Iwabe, Kazufumi Enta, H. Iwabe, 2008, Int. J. Autom. Technol..

Analysis of theoretical roughness of radius end milling (Geometrical analysis in case of contouring and scanning method and experiments)

Hiroyasu Iwabe, Kenji Shirai, Kyouhei Kikuchi, 2015 .

Side Milling of Helical End Mill Oscillated in Axial Direction with Ultrasonic Vibration

Hiroyasu Iwabe, Masahiko Jin, Mitunori Hiwatashi, 2019, Int. J. Autom. Technol..

High-Accuracy Machining of Thin-Walled Workpiece by Non-Rotational Tool-Analysis of Machining Accuracy Based on Deflection of Tool and Workpiece Using FEM-

Hiroyasu Iwabe, Hideaki Matsuhashi, Hayato Akutsu, 2010, Int. J. Autom. Technol..

Study on Machining Accuracy of Scroll Shape Workpiece with Polar Coordinate Method

Hiroyasu Iwabe, Masahide Kobayashi, Hideaki Matsuhashi, 2000 .

B27 Study on Cutting Performance of Inclined Surface Machining of Radius End Mill using 3D-CAD

Hiroyasu Iwabe, Tsuyoshi Fujita, Masanori Futakawa, 2012 .

Discussion about Engineering Education in Japanese University from the International Point of View

Hiroyasu Iwabe, Takashi Sato, Shuichi Sakamoto, 2010 .

1107 Analysis of Cutting Mechanism and Cutting Performance of Oval End Mill for Inclined Surface using 3D-CAD

Hiroyasu Iwabe, Isao Hori, Takayoshi Kumaki, 2005 .

Study on corner cut by end mill: analysis of cutting mechanism and new cutting method at inside corner

Hiroyasu Iwabe, Takeshi Kishinami, Yoshiya Fujii, 1989 .

Study on Machining Accuracy of Scroll Shape Workpiece with Polar Coordinate Method

Hiroyasu Iwabe, Masahide Kobayashi, Hideaki Matsuhashi, 2002 .

Study on Analysis of Cutting Mechanism and Cutting Performance by Radius End Mill (Comparison with Results of Ball End Milling of Inclined Surface in Case of Contouring Pick Feed Method)

Hiroyasu Iwabe, Tsuyoshi Fujita, Masanori Futakawa, 2013 .

Study on improvement of machining accuracy in cornering cut with end mill.

Hiroyasu Iwabe, Li Yong, Yoshiya Fujii, 1990 .

1109 Study on High Accurate Machining of Scroll Wall by Non Rotating Tool : Analysis of Machining Accuracy based on Tool Deformation using FEM

Hiroyasu Iwabe, Hideaki Matsuhashi, Hideto Fukuyama, 2005 .

Study on Cutting Mechanism and Cutting Performance of Inclined Surface Machining with Radius End Mill:—Comparison with Cutting Method of Contouring Path and Scanning Path—

Hiroyasu Iwabe, Masanori Futakawa, Yusaku Kazama, 2015 .

Fundamental Problems of Machining Accuracy by End Mill and High-Speed and High-Accurate Machining Method.

Hiroyasu Iwabe, 2000 .

Learn-by-Doing Engineering Career Education And Its Present Status of Supporting Organization Outside The University

Masakazu Sengoku, Masakazu Sengoku, Hiroyasu Iwabe, 2010 .

Analysis of Cutting Mechanism of Tapered End Mill using Three-Dimensional CAD

Hiroyasu Iwabe, Takashi Yokozuka, 2000 .

Study on Cutting Mechanism and Cutting Performance of Machining for Curved Surface by Ball End Mill using 3D-CAD

Hiroyasu Iwabe, Hideki Miwa, 2008 .

1108 Study on Cutting Performance for Inclined Surface by Radius end mill using 3D-CAD

Hiroyasu Iwabe, Masanori Futakawa, Tsuyoshi Nanba, 2010 .

High Speed End Milling of Hardened Steel. (3rd Report). Influence of Overhang of End Mill on Stability of End Milling and Proposal of Easy Testing Method of Stability Discrimination.

Hiroyasu Iwabe, Takashi Miyaguchi, Etsuo Takeoka, 1999 .

Study on Cutting Mechanism and Cutting Performance of Machining for Curved Surface by Ball End Mill using ３D－CAD

Hiroyasu Iwabe, Hideki Miwa, 2007 .

Study on evaluation for cutting performance of ball end milling with straight-line path method for inclined surface using 3D-CAD (Influence of feed direction on cutting mechanism)

Hiroyasu Iwabe, Tsuyoshi Fujita, 2014 .

Influence of Eccentricity of Helical End Mill on Working Accuracy.

Hiroyasu Iwabe, Hiroshi Mitsuboshi, 1995 .

High Speed End Milling of Hardened Steel (1st Report)

Hiroyasu Iwabe, Shuhei Aida, Etsuo Takeoka, 1996 .

Development of Learn-by-Doing Engineering Career Education Programs by Company Collaborations

Masakazu Sengoku, Hiroyasu Iwabe, Hideo Ohkawa, 2009 .

Study on cutting mechanism of different helix angles end mills. Geometrical analysis of cutting process and cutting performance.

Hiroyasu Iwabe, Yoshiya Fujii, 1990 .

1106 Study on Tool Life and Surface Roughness of High Speed Milling of Hardened Steel by Small Size Ball End Mill

Hiroyasu Iwabe, Kazuo Nakamoto, Hisashi Endo, 2005 .