A. Harris

发表

Active Damping Control in MEMS Using Parametric Pumping

Js Burdess, Barry Gallacher, Alun Harris, 2005 .

Electrostatic correction of structural imperfections present in a microring gyroscope

J. Hedley, J. Burdess, D. King, 2005, Journal of Microelectromechanical Systems.

A system for the dynamic characterization of microstructures

David Wood, Alun Harris, J. S. Burdess, 1997 .

Mechanical properties of a 3C-SiC film between room temperature and 600 °C

Liudi Jiang, Rebecca Cheung, Mehran Mehregany, 2007 .

Integration of a novel electrochemical tuning scheme with MEMS surface micromachined resonators

J.T.M. Stevenson, S. Enderling, C.L. Brown, 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

Dry release fabrication and testing of SiC electrostatic cantilever actuators

M. Mehregany, C. Zorman, R. Cheung, 2005 .

SiC cantilever resonators with electrothermal actuation

Liudi Jiang, Rebecca Cheung, Mehran Mehregany, 2006 .

SiC for MEMS-based Filters

R. Cheung, J. Burdess, Liudi Jiang, 2008 .

Initial Test Results from a 3-axis Vibrating Ring Gyroscope

J. Neasham, J. Burdess, B. Gallacher, 2006 .

An electrostatically actuated cantilever device capable of accurately calibrating the cantilever on-chip for AFM-like applications

Sunil Rana, Pedro Martinez Ortiz, Alun Harris, 2009 .

Development of a workstation for optical testing and modification of IMEMS on a wafer

Mark E. McNie, John Hedley, Alun J. Harris, 2001, Symposium on Design, Test, Integration, and Packaging of MEMS/MOEMS.

Raman and finite-element analysis of a mechanically strained silicon microstructure

David Wood, Alun Harris, Jim Burdess, 2001 .

Fabrication of SiC microelectromechanical systems using one-step dry etching

Liudi Jiang, Rebecca Cheung, Mehran Mehregany, 2003 .

The fabrication, characterization and testing of a MEMS circular diaphragm mass sensor

Alun Harris, Jim Burdess, Calum J. McNeil, 2008 .

The principle of a MEMS circular diaphragm mass sensor

Alun Harris, Calum J. McNeil, John Hedley, 2006 .

Issues associated with scaling up production of a lab demonstrated MEMS mass sensor

Pedro Martinez Ortiz, Alun Harris, Jim Burdess, 2012 .

A review of vibratory gyroscopes

J. S. Burdess, David Wood, A. J. Harris, 1994 .

Dopant Mapping and Strain Analysis in B Doped Silicon Structures Using Micro-Raman Spectroscopy

J. Burdess, J. Hedley, A. Harris, 1998 .

An optical workstation for characterization and modification of MEMS

Barry Gallacher, Alun Harris, Jim Burdess, 2004, SPIE Photonics Europe.

Frequency adjustment of microelectromechanical cantilevers using electrostatic pull down

Alun Harris, Jim Burdess, Said Kafumbe, 2005 .

Electronic Detection Strategies for a MEMS-Based Biosensor

R. Burnett, A. Harris, P. Ortiz, 2013, Journal of Microelectromechanical Systems.

Issues associated with the design, fabrication and testing of a crystalline silicon ring gyroscope with electromagnetic actuation and sensing

Michael C. L. Ward, M E McNie, Js Burdess, 1998 .

The structural characteristics of microengineered bridges

J. Burdess, A. Harris, R. Pitcher, 2000 .