D. V. Van Citters

发表

Promoting innovation: Enhancing transdisciplinary opportunities for medical and engineering students

Tiffany Brazile, Glenda Hostetter Shoop, C. McDonough, 2018, Medical teacher.

Role of corrosion in taper failure and head disassociation in total hip arthroplasty of a single design

D. Jenkins, D. V. Van Citters, Audrey J Martin, 2018, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Analysis of severely fractured glenoid components: clinical consequences of biomechanics, design, and materials selection on implant performance.

L. Pruitt, D. V. Van Citters, Farzana Ansari, 2016, Journal of shoulder and elbow surgery.

Stance and swing phase knee flexion recover at different rates following total knee arthroplasty: An inertial measurement unit study.

D. V. Van Citters, W. Moschetti, R. Chapman, 2019, Journal of biomechanics.

Femoral stem fracture and in vivo corrosion of retrieved modular femoral hips.

J. Currier, D. V. Van Citters, M. Mayor, 2012, The Journal of arthroplasty.

Clinical wear measurement on low contact stress rotating platform knee bearings.

F. Kennedy, J. Currier, S. Atwood, 2008, The Journal of arthroplasty.

Oxidation of Ultra-High Molecular Weight Polyethylene and Its Influence on Contact Fatigue and Pitting of Knee Bearings

F. Kennedy, J. Currier, D. V. Van Citters, 2003 .

Assessing Shoulder Biomechanics of Healthy Elderly Individuals During Activities of Daily Living Using Inertial Measurement Units: High Maximum Elevation Is Achievable but Rarely Used.

D. V. Van Citters, M. Torchia, John-Erik Bell, 2019, Journal of biomechanical engineering.

Continuously monitoring shoulder motion after total shoulder arthroplasty: maximum elevation and time spent above 90° of elevation are critical metrics to monitor.

D. V. Van Citters, M. Torchia, John-Erik Bell, 2019, Journal of shoulder and elbow surgery.

A novel abdominal phantom model for laparoscopic and robotic exposure of retroperitoneal structures

J. Seigne, D. V. Van Citters, R. Halter, 2022, Medical Imaging.

A particle filter approach to dynamic kidney pose estimation in robotic surgical exposure

J. Seigne, D. V. Van Citters, R. Halter, 2022, International Journal of Computer Assisted Radiology and Surgery.

Complications in patients with intramedullary nails: a case series from a single Cambodian surgical clinic

D. V. Van Citters, Michael F Githens, Audrey J Martin, 2018, International Orthopaedics.

Shear enhancement of mechanical and microstructural properties of synthetic graphite and ultra‐high molecular weight polyethylene carbon composites

D. V. Van Citters, I. Tsukrov, Hannah J. Favreau, 2022, Journal of Applied Polymer Science.

Bilateral Femoral Component Fractures After Primary Total Knee Arthroplasty With Cruciate-Retaining Femoral Component

D. V. Van Citters, Karl Koenig, R. Chapman, 2020, Arthroplasty today.

Oxidation and other property changes of a remelted highly crosslinked UHMWPE in retrieved tibial bearings.

D. V. Van Citters, J. Collier, B. Currier, 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

What factors drive polyethylene wear in total knee arthroplasty? : results of a large retrieval series.

D. Berry, J. Currier, A. Titus, 2021, The bone & joint journal.

Using Inertial Measurement Units to Quantify Shoulder Elevation after Reverse Total Shoulder Arthroplasty: A Pilot Study Comparing Goniometric Measures Captured Clinically to Inertial Measures Captured ‘In-The-Wild’

D. V. Van Citters, M. Torchia, R. Chapman, 2022, Seminars in Arthroplasty: JSES.

The effect of altering head length on corrosion using a material loss method

M. Teeter, J. Howard, S. MacDonald, 2019, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Photochemical Control of the Mechanical and Adhesive Properties of Crystalline Molecular Solids

K. Mirica, D. V. Van Citters, Haydn T. Mitchell, 2021, Crystal Growth & Design.

Identification of a calcium phosphoserine coordination network in an adhesive organo-apatitic bone cement system.

K. Mirica, I. Baker, D. V. Van Citters, 2020, Acta biomaterialia.

Metal-on-Metal Compared With Metal-on-Polyethylene: The Effect on Trunnion Corrosion in Total Hip Arthroplasty.

M. Teeter, J. Howard, S. MacDonald, 2017, The Journal of arthroplasty.

Metal transfer on a ceramic head with a single rim contact.

J. Currier, D. V. Van Citters, M. Mayor, 2012, The Journal of arthroplasty.

Crystal Engineering of Molecular Solids as Temporary Adhesives

K. Mirica, D. V. Van Citters, Haydn T. Mitchell, 2020 .

Tradeoffs amongst fatigue, wear, and oxidation resistance of cross-linked ultra-high molecular weight polyethylene.

L. Pruitt, S. Atwood, D. V. Van Citters, 2011, Journal of the mechanical behavior of biomedical materials.

Crosslink density, oxidation and chain scission in retrieved, highly cross-linked UHMWPE tibial bearings.

D. V. Van Citters, B. Currier, Steven D Reinitz, 2014, Biomaterials.

In vivo oxidation in remelted highly cross-linked retrievals.

J. Currier, D. V. Van Citters, B. Currier, 2010, The Journal of bone and joint surgery. American volume.

Rim cracking of the cross-linked longevity polyethylene acetabular liner after total hip arthroplasty.

J. Currier, K. Lyford, D. V. Van Citters, 2007, The Journal of bone and joint surgery. American volume.

Oxidation in Retrieved, Never-Irradiated UHMWPE Bearings

D. V. Van Citters, B. Currier, Kori C Jevsevar, 2022, The Journal of bone and joint surgery. American volume.

Evaluation of oxidation and fatigue damage of retrieved crossfire polyethylene acetabular cups.

J. Currier, K. Lyford, D. V. Van Citters, 2007, The Journal of bone and joint surgery. American volume.

Characterizing the free volume of ultrahigh molecular weight polyethylene to predict diffusion coefficients in orthopedic liners.

Dustin W. Janes, D. Saylor, V. Chandrasekar, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

The polyethylene on bone articulation, as occurs with scapular notching, is associated with osteolytic potential

D. V. Van Citters, D. Austin, John‐Erik Bell, 2020 .

Use of adhesive cranial bone flap fixation without hardware to improve mechanical strength, resist cerebrospinal fluid leakage, and maintain anatomical alignment: a laboratory study

K. Foley, E. Woodard, D. V. Van Citters, 2022, Journal of neurosurgery.

Fatigue fracture of a proximally modular, distally tapered fluted implant with diaphyseal fixation.

M. Buttaro, D. V. Van Citters, M. Mayor, 2007, The Journal of arthroplasty.

In Vivo Corrosion of Sleeved Ceramic Femoral Heads: A Retrieval Study.

D. Berry, D. V. Van Citters, R. Trousdale, 2020, The Journal of arthroplasty.

In Vivo Corrosion of Modular Dual-Mobility Implants: A Retrieval Study.

D. Berry, D. V. Van Citters, R. Trousdale, 2020, The Journal of arthroplasty.

Catastrophic Head-Neck Dissociation of a Modular Cementless Femoral Component

D. Lewallen, D. V. Van Citters, J. Cass, 2015, JBJS case connector.

Failure of a Polyaryletheretherketone-Cobalt-Chromium Composite Femoral Stem Due to Coating Separation and Subsidence: A Case Report

M. Bartelstein, D. V. Van Citters, C. Moucha, 2017, JBJS case connector.

Equal channel angular extrusion of ultra-high molecular weight polyethylene.

D. V. Van Citters, A. Engler, Steven D Reinitz, 2016, Materials science & engineering. C, Materials for biological applications.

The Effect of Absorbable Calcium Sulfate on Wear Rates in Ultra-high–Molecular-weight Polyethylene: Potential Implications for Its Use in Treating Arthroplasty Infections

Kathleen A. Lewicki, M. Bartelstein, D. V. Van Citters, 2017, The Journal of the American Academy of Orthopaedic Surgeons.

Analysis of polyethylene wear of reverse shoulder components: A validated technique and initial clinical results

Kathleen A. Lewicki, D. V. Van Citters, John‐Erik Bell, 2017, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Variation of mechanical properties and oxidation with radiation dose and source in highly crosslinked remelted UHMWPE.

D. V. Van Citters, J. Bowsher, Mitchell Fung, 2018, Journal of the mechanical behavior of biomedical materials.

The use of highly crosslinked polyethylene in total knee arthroplasty

D. Berry, D. V. Van Citters, M. Abdel, 2017, The bone & joint journal.

Assessment of Corrosion, Fretting, and Material Loss of Retrieved Modular Total Knee Arthroplasties.

D. V. Van Citters, Audrey J Martin, Kirsten A Seagers, 2017, The Journal of arthroplasty.

Effect of head size and rotation on taper corrosion in a hip simulator

W. Walsh, C. Whyne, R. Zdero, 2021, Bone & joint open.

An Anatomic Predisposition to Mandibular Angle Fractures.

D. V. Van Citters, E. Holmgren, Caroline S Lauer, 2020, Journal of oral and maxillofacial surgery.

A Novel Technique for Assessing Antioxidant Concentration in Retrieved UHMWPE

D. V. Van Citters, B. Currier, 2017, Clinical orthopaedics and related research.

Oxidized Zirconium Components Maintain a Smooth Articular Surface Except Following Hip Dislocation.

L. Pruitt, D. V. Van Citters, M. Ries, 2020, The Journal of arthroplasty.

Effectiveness of anti-oxidant polyethylene: What early retrievals can tell us.

J. Currier, D. V. Van Citters, B. Currier, 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

Fractography and oxidative analysis of gamma inert sterilized posterior-stabilized tibial insert post fractures: report of two cases.

L. Pruitt, J. Huddleston, D. V. Van Citters, 2013, The Knee.

Evaluating the suitability of highly cross-linked and remelted materials for use in posterior stabilized knees.

J. Currier, D. V. Van Citters, M. Mayor, 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

Oxidation and other property changes of retrieved sequentially annealed UHMWPE acetabular and tibial bearings.

D. V. Van Citters, B. Currier, Steven D Reinitz, 2015, Journal of biomedical materials research. Part B, Applied biomaterials.

In vivo oxidation in retrieved highly crosslinked tibial inserts.

J. Currier, D. V. Van Citters, B. Currier, 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

Contribution of micro‐motion to backside wear in a fixed bearing total knee arthroplasty

Kathleen A. Lewicki, J. Currier, D. V. Van Citters, 2016, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Two pegs are better than one: rare mode of femoral component failure in unicompartmental arthroplasty requiring revision to total knee arthroplasty

A. Sassoon, D. V. Van Citters, Ryan Stancil, 2017, Arthroplasty today.

Higher offset cross-linked polyethylene acetabular liners: is wear a significant clinical concern?

D. V. Van Citters, D. Dalury, R. Chapman, 2018, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

In vivo oxidation of gamma-barrier-sterilized ultra-high-molecular-weight polyethylene bearings.

J. Currier, K. Lyford, D. V. Van Citters, 2007, The Journal of arthroplasty.

The effect of radiation dose on the tensile and impact toughness of highly cross-linked and remelted ultrahigh-molecular weight polyethylenes.

J. Currier, D. V. Van Citters, J. C. Huot, 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

A retrieval analysis perspective on revision for infection

D. Berry, D. V. Van Citters, M. Abdel, 2019, Arthroplasty today.

A gyroscope-based system for intraoperative measurement of tibia coronal plane alignment in total knee arthroplasty

M. Roche, D. V. Van Citters, R. Chapman, 2021, Medicine in Novel Technology and Devices.

Mechanical failure of marathon cross-linked polyethylene acetabular liner after total hip arthroplasty.

W. Hamilton, D. V. Van Citters, Matthew O Barrett, 2011, American journal of orthopedics.

Analysis of Failed Ankle Arthroplasty Components

J. Nunley, P. Hecht, J. Currier, 2018, Foot & ankle international.

Explant Analysis from a Patient Exhibiting Rapid Acceleration of Parkinson Disease Symptoms and Hypercobaltemia Following Metal-on-Metal Total Hip Arthroplasty: A Case Report

D. V. Van Citters, G. Glass, T. Steck, 2016, JBJS case connector.

Developing a method for quantifying hip joint angles and moments during walking using neural networks and wearables

D. V. Van Citters, R. Chapman, M. McCabe, 2022, Computer methods in biomechanics and biomedical engineering.

Hip Joint Angles and Moments during Stair Ascent Using Neural Networks and Wearable Sensors

D. V. Van Citters, R. Chapman, M. McCabe, 2023, Bioengineering.

Delamination of a highly cross-linked polyethylene liner associated with titanium deposits on the cobalt-chromium modular femoral head following dislocation.

S. Atwood, D. V. Van Citters, E. Patten, 2010, The Journal of bone and joint surgery. British volume.

A geometric assessment method for estimating dimensional change of retrieved dual mobility liners for total hip arthroplasty

R. Wilcox, G. Isaac, D. V. Van Citters, 2023, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Comparison of Wear and Oxidation in Retrieved Conventional and Highly Cross-Linked UHMWPE Tibial Inserts.

J. Currier, D. V. Van Citters, M. Mayor, 2015, The Journal of arthroplasty.

Femoral head material loss at the head-neck junction in total hip arthroplasty: the effect of head size, stem material and stem offset

M. Teeter, J. Howard, S. MacDonald, 2018, Hip international : the journal of clinical and experimental research on hip pathology and therapy.

Damage patterns in polyethylene fixed bearings of retrieved total ankle replacements.

P. Campbell, E. Ebramzadeh, D. V. Van Citters, 2020, Foot and ankle surgery : official journal of the European Society of Foot and Ankle Surgeons.

Assessing Upper Extremity Biomechanics during Activities of Daily Living Using Inertial Measurement Units: Does our Concept of 'Normal' Apply?

D. V. Van Citters, M. Torchia, R. Chapman, 2019, Journal of biomechanical engineering.

Computational modeling of microwave ablation with thermal accelerants.

P. Prakash, D. V. Van Citters, J. Sebek, 2023, International journal of hyperthermia : the official journal of European Society for Hyperthermic Oncology, North American Hyperthermia Group.

Letter to the editor on “Catastrophic failure of a dual mobility bearing in a revision total hip arthroplasty”

D. Berry, D. V. Van Citters, M. Abdel, 2018, Arthroplasty today.