B. Boswell

发表

Modelling the effects of production rates and physico-chemical parameters on pitting rate and pit depth growth of onshore oil and gas pipelines

I. Davies, C. Ossai, B. Boswell, 2016 .

Estimation of internal pit depth growth and reliability of aged oil and gas pipelines: A Monte Carlo simulation approach

Chinedu I. Ossai, I. Davies, C. Ossai, 2015 .

Predictive Modelling of Internal Pitting Corrosion of Aged Non-Piggable Pipelines

I. Davies, C. Ossai, B. Boswell, 2015 .

OF MACHINING METAL MATRIX COMPOSITES

I. Davies, B. Boswell, C. Nicholls, 2018 .

Changing Manufacturer ’ s Opinion in Reducing the Use of Flood Coolant when End Milling Titanium

M. Islam, B. Boswell, Y. Ginting, 2019 .

Accuracy and finish during wire electric discharge machining of metal matrix composites for different reinforcement size and machining conditions

G. Littlefair, A. Pramanik, Yu Dong, 2018 .

Effect of cooling methods on dimensional accuracy and surface finish of a turned titanium part

A. Pramanik, M. Islam, B. Boswell, 2013 .

Effect of cooling methods on hole quality in drilling of aluminium 6061-6T

M. Islam, B. Boswell, 2016 .

Contribution of machining to the fatigue behaviour of metal matrix composites (MMCs) of varying reinforcement size

I. Davies, S. Chattopadhyaya, A. Pramanik, 2017 .

Techno-Economic and Environmental Implications of Electricity Generation from Solar Updraft Chimney Power Plant in Meekatharra in Western Australia

W. Biswas, B. Boswell, 2018 .

Effect of cooling methods on dimensional accuracy and surface finish of a turned titanium part

B. Boswell, A. Pramanik, M. N. Islam, 2013, The International Journal of Advanced Manufacturing Technology.

Pipeline failures in corrosive environments – A conceptual analysis of trends and effects

Brian Boswell, Chinedu I. Ossai, Ian J. Davies, 2015 .

Review of machining metal matrix composites

Brian Boswell, Mohammad Nazrul Islam, Ian J. Davies, 2017 .

Review of machining metal matrix composites

I. Davies, B. Boswell, Carl J. Nicholls, 2016, The International Journal of Advanced Manufacturing Technology.

Effect of machining parameters on the surface finish of a metal matrix composite under dry cutting conditions

Brian Boswell, Mohammad Nazrul Islam, Ian J. Davies, 2017 .

Effect of cooling methods on cutting temperature, cutting force and hole quality in drilling of three ferrous alloys

B. Boswell, M. N. Islam, 2019, Journal of Physics: Conference Series.

An Investigation of Dimensional Accuracy of Parts Produced by Three-Dimensional Printing

Brian Boswell, Mohammad Nazrul Islam, Alokesh Pramanik, 2013 .

A review of micro-mechanical cutting

Brian Boswell, Mohammad Nazrul Islam, Ian J. Davies, 2018 .

A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining

Brian Boswell, Mohammad Nazrul Islam, Ian J. Davies, 2017 .

A review of micro-mechanical cutting

I. Davies, B. Boswell, M. N. Islam, 2017, The International Journal of Advanced Manufacturing Technology.

A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining

M.N. Islam, I. Davies, B. Boswell, 2017, The International Journal of Advanced Manufacturing Technology.

Environmental Generation of Cold Air for Machining

Brian Boswell, Mohammad Nazrul Islam, Wahidul K. Biswas, 2016 .

Advancing Environmentally Conscious Machining

Brian Boswell, Wahidul K. Biswas, Y. Ginting, 2015 .

Optimum Parameters for Machining Metal Matrix Composite

A. Pramanik, M. Islam, B. Boswell, 2014 .

Effect of Cutting Parameters on Surface Finish for Three Different Materials in Dry Turning

Brian Boswell, Mohammad Nazrul Islam, M. Islam, 2013 .

Sustainable Machining of Aerospace Material

Brian Boswell, Mohammad Nazrul Islam, Alokesh Pramanik, 2013 .

An Investigation of Surface Finish in Dry Turning

Brian Boswell, Mohammad Nazrul Islam, M. Islam, 2011, WCE 2011.

Investigation into Alternative Cooling Methods for Achieving Environmentally Friendly Machining Process

Brian Boswell, Mohammad Nazrul Islam, Wahidul K. Biswas, 2015 .

The Challenge of Adopting Minimal Quantities of Lubrication for End Milling Aluminium

Brian Boswell, Mohammad Nazrul Islam, M. Islam, 2013 .

Feasibility Study of Adopting Minimal Quantities of Lubrication for End Milling Aluminium

Brian Boswell, Mohammad Nazrul Islam, M. Islam, 2012, WCE 2012.

A Markovian approach for modelling the effects of maintenance on downtime and failure risk of wind turbine components

Brian Boswell, Chinedu I. Ossai, Ian J. Davies, 2016 .

Vancouver Island mechanized thinning trials

B. Boswell, B. Boswell, 1998 .

Markov chain modelling for time evolution of internal pitting corrosion distribution of oil and gas pipelines

Brian Boswell, Chinedu I. Ossai, Ian J. Davies, 2016 .

Air-Cooling Used For Metal Cutting

Brian Boswell, Tilak T. Chandratilleke, B. Boswell, 2009 .

Personal Computer Life Cycle Assessment Study: The Case of Western Australia

Brian Boswell, Wahidul K. Biswas, Marudut Sirait, 2012 .