A. King

发表

Fatigue damage mechanisms of short fiber reinforced PA66 as observed by in-situ synchrotron X-ray microtomography

N. Saintier, H. Rolland, I. Raphael, 2018, Composites Part B: Engineering.

Observations of Intergranular Stress Corrosion Cracking in a Grain-Mapped Polycrystal

W. Ludwig, A. King, G. Johnson, 2008, Science.

Effects of fatigue and fretting on residual stresses introduced by laser shock peening

Philip J. Withers, C. Woodward, A. Steuwer, 2006 .

The Effect of Fatigue on Residual Peening Stresses in Aerospace Components

P. Withers, A. Evans, C. Woodward, 2005 .

A phase field method for modeling anodic dissolution induced stress corrosion crack propagation

J. Adrien, J. Buffière, J. Réthoré, 2017 .

Characterization of laser peening residual stresses in Al 7075 by synchrotron diffraction and the contour method

P. Withers, A. Evans, G. Johnson, 2007 .

CONTACT AND ACOUSTIC MEASUREMENTS ON A FATIGUING T-PLATE JOINT

A. King, K. Klein, 2003 .

Identification of crystalline elastic anisotropy in PZT ceramics from in-situ blocking stress measurements

P. Withers, K. Webber, D. Hall, 2014 .

Anisotropy in Thermal Expansion of Bainitic Ferrite

M. Hermans, I. Richardson, R. Huizenga, 2014, Metallurgical and Materials Transactions A.

In-Situ Synchrotron Diffraction Studies on Transformation Strain Development in a High Strength Quenched and Tempered Structural Steel—Part I. Bainitic Transformation

M. Hermans, J. Sietsma, I. Richardson, 2013, Metallurgical and Materials Transactions A.

Multiple Cracks Interactions in Stress Corrosion Cracking: In Situ Observation by Digital Image Correlation and Phase Field Modeling

J. Buffière, J. Adrien, J. Réthoré, 2017 .

In-situ synchrotron X-ray radiography observation of primary Al2Cu intermetallic growth on fragments of aluminium oxide film

D. Eskin, T. Connolley, C. Reinhard, 2018 .

A synchrotron X-radiography study of the fragmentation and refinement of primary intermetallic particles in an Al-35Cu alloy induced by ultrasonic melt processing

D. Eskin, T. Connolley, C. Reinhard, 2017 .

In Situ Synchrotron Diffraction Studies on Hot Deformation of Austenite in a High Strength Quenched and Tempered Structural Steel

M. Hermans, I. Richardson, R. Huizenga, 2014 .

Time dependent voiding mechanisms in polyamide 6 submitted to high stress triaxiality: experimental characterisation and finite element modelling

Henry Proudhon, Nicolas Saintier, Lucien Laiarinandrasana, 2018 .

Revisiting the blocking force test on ferroelectric ceramics using high energy x-ray diffraction

P. Withers, J. Koruza, K. Webber, 2015 .

MODELLING AND MEASUREMENT OF PLASTIC DEFORMATION AND GRAIN ROTATION IN 3D AT THE GRAIN-TO-GRAIN LEVEL

Philip J. Withers, Andy King, Igor Simonovski, 2011 .

Investigation of Fatigue Crack Propagation in Nickel Superalloy Using Diffraction Contrast Tomography and Phase Contrast Tomography

J. Lachambre, A. King, O. Messé, 2014 .

In situ synchrotron study of sintering of gas-atomized Ti-6Al-4V powders using concomitant micro-tomography and X-ray diffraction: effect of particle size and interstitials on densification and phase transformation kinetics

E. Maire, J. Adrien, J. Lachambre, 2023, Acta Materialia.

Characterisation of Residual Stresses Generated by Laser Shock Peening by Neutron and Synchrotron Diffraction

P. Withers, P. Peyre, A. Evans, 2009 .

In Situ Synchrotron Diffraction Studies on Peak Broadening During Bainitic Transformation in a High Strength Quenched and Tempered Steel

M. Hermans, I. Richardson, Hongkai Gao, 2014 .

Transformation-Induced Diffraction Peak Broadening During Bainitic and Martensitic Transformations Under Small External Loads in a Quenched and Tempered High Strength Steel

M. Hermans, I. Richardson, R. Huizenga, 2013, Metallurgical and Materials Transactions A.

Synchrotron Diffraction Studies on the Transformation Strain in a High Strength Quenched and Tempered Structural Steel

M. Hermans, I. Richardson, R. Huizenga, 2014 .

In situ synchrotron diffraction studies on the temperature-dependent plane-specific elastic constants in a high-strength quenched and tempered structural steel

M. Hermans, I. Richardson, R. Huizenga, 2013 .

Time dependent voiding mechanisms in polyamide 6 submitted to high stress triaxiality: experimental characterisation and finite element modelling

H. Proudhon, N. Saintier, A. King, 2017, Mechanics of Time-Dependent Materials.

Internal fatigue crack monitoring during ultrasonic fatigue test using temperature measurements and tomography

N. Saintier, Y. Nadot, A. Messager, 2022, Mechanics of materials (Print).

Environment effect on internal fatigue crack propagation studied with in-situ X-ray microtomography

N. Ranc, A. Weck, M. Majkut, 2023, Materials Science and Engineering: A.

Study of Residual Stresses Introduced by Laser Shock Peening in Wide Chord Fan Blades by Neutron and Synchrotron Diffraction

M. Preuss, P. Withers, A. Evans, 2004 .

Near Surface Residual Stress Determination of Laser Shock Peening by Neutron Diffraction

P. Withers, A. Evans, G. Bruno, 2003 .

Towards modelling intergranular stress-corrosion cracks using experimentally obtained grain topologies

T. Marrow, I. Simonovski, A. King, 2009 .