Paolo Pennacchi

Paolo Pennacchi, Gabriele D'Antona, Claudio Pensieri, 2012, 2012 IEEE International Workshop on Applied Measurements for Power Systems (AMPS) Proceedings.

Accuracy of modelling and identification of malfunctions in rotor systems: experimental results

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2000 .

Comportamento sperimentale di cuscinetti portanti lubrificati operanti a bassi numeri di Sommerfeld

Paolo Pennacchi, Steven Chatterton, Andrea De Luca, 2016 .

A new procedure for using envelope analysis for rolling element bearing diagnostics in variable operating conditions

Paolo Pennacchi, Steven Chatterton, R. Ricci, 2013 .

Fault Identification in Industrial Rotating Machinery: Theory and Applications

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2011 .

Identification of mechanical faults in rotating machinery for power generation

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2010, 2010 IEEE International Symposium on Industrial Electronics.

Stability Analysis of a Cracked Rotor With Several Degrees of Freedom

Paolo Pennacchi, Roberto Ricci, 2009 .

Use of modal representation for the supporting structure in model-based fault identification of large rotating machinery. part 1-theoretical remarks

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2006 .

Behavior of a Tilting–Pad Journal Bearing With Different Load Directions

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2015 .

Design of a Stirling Machine in a Multi-Cylinder Configuration for Microcogeneration

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2012 .

Introduction of Model-Based Identification Methods Applied to Rotating Machinery of Électricité de France

Ionel Nistor, Paolo Pennacchi, Philippe Voinis, 2009 .

Condition Monitoring and Diagnostics of Wind Turbines: A Survey

Paolo Pennacchi, Steven Chatterton, Pietro Borghesani, 2014 .

Effects of Thermal Transients on Cracked Shaft Vibrations

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2011 .

Light and short arc rubs in rotating machines: Experimental tests and modelling

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2009 .

Signal Processing Diagnostic Tool for Rolling Element Bearings Using EMD and MED

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2014 .

Experimental Results in Simultaneous Identification of Multiple Faults in Rotor Systems

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2001 .

Diagnostics of Bearings in Rolling Stocks: Results of Long Lasting Tests for a Regional Train Locomotive

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2018 .

Analysis of the thermal effects in rotor shaft affected by transverse crack

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2007, HiPC 2007.

Order tracking for discrete-random separation in variable speed conditions

Robert B. Randall, Paolo Pennacchi, Roberto Ricci, 2012 .

A sensitivity analysis of vibrations in cracked turbogenerator units versus crack position and depth

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2010 .

Analysis of the Dynamic Behavior of Two High-Pressure Turbines for the Possible Detection of Rub Symptoms

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2016 .

Identification of a Rotor Crack in a Gas Turbine Without Twice Per Revolution Symptoms

Paolo Pennacchi, Andrea Vania, 2007 .

A model-based strategy for the in field balancing of a generator rotor

Paolo Pennacchi, Nicolò Bachschmid, Andrea Vania, 2006 .

Characterization of Five-Pad Tilting-Pad Journal Bearings Using an Original Test-Rig

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2011 .

Rotor Design and Optimization in Internal Lobe Pumps

Paolo Pennacchi, Giovanni Mimmi, 1997 .

The relationship between kurtosis- and envelope-based indexes for the diagnostic of rolling element bearings

Paolo Pennacchi, Steven Chatterton, Pietro Borghesani, 2014 .

Cracked Rotors: A Survey on Static and Dynamic Behaviour Including Modelling and Diagnosis

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2010 .

Dynamical behaviour of a three-phase generator due to unbalanced magnetic pull

Paolo Pennacchi, Lucia Frosini, P. Pennacchi, 2005 .

Application of a Multiple Fault Identification Method to Experimental Results

Paolo Pennacchi, Nicolò Bachschmid, Andrea Vania, 2002 .

Diagnostic of rolling element bearings with envelope analysis in non-stationary conditions

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2014 .

Experimental validation of the torsional model of a steam turbo generator

Paolo Pennacchi, Andrea Vania, Emanuel Pesatori, 2006 .

A novel procedure for the selection of the frequency band in the envelope analysis for rolling element bearing diagnostics

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2015 .

Fault symptoms of rolling element bearings under variable operating conditions - a multi domain analysis

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2012 .

Research activities on rotor dynamics at Politecnico di Milano

Paolo Pennacchi, Nicolò Bachschmid, Andrea Vania, 2005 .

Computational model for calculating the dynamical behaviour of generators caused by unbalanced magnetic pull and experimental validation

Paolo Pennacchi, 2008 .

Pre-shaping motion input for a rotating flexible link

Paolo Pennacchi, Giovanni Mimmi, 2001 .

Case Studies of Fault Identification in Power Plant Large Rotating Machinery

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2002 .

Increasing the robustness of fault identification in rotor dynamics by means of M-estimators

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2007 .

Computational Model for Calculating the Dynamical Behaviour of Generators Caused by Unbalanced Magnetic Pull and Experimental Validation

Paolo Pennacchi, Lucia Frosini, 2007 .

Application and Comparison of High Breakdown-Point and Bounded-Influence Estimators to Rotor Balancing

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2010 .

Robust estimation of excitations in mechanical systems using M-estimators-Experimental applications

Paolo Pennacchi, 2009 .

Use of modal representation for the supporting structure in model-based fault identification of large rotating machinery: Part 2—application to a real machine

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2006 .

A model to study the reduction of turbine blade vibration using the snubbing mechanism

Paolo Pennacchi, Steven Chatterton, Nicolò Bachschmid, 2011 .

Analisi teorica e sperimentale dell’effetto della direzione del carico in cuscinetti a pattini oscillanti reali

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2016 .

Modeling of the dynamic response of a Francis turbine

Paolo Pennacchi, Steven Chatterton, Andrea Vania, 2012 .

Evaluation of Human Body Dynamical Behaviour During Handling Maneuvers and Crash Test Simulations Using Multi-Body Codes

Paolo Pennacchi, Francesco Braghin, Edoardo Sabbioni, 2006 .

The velocity synchronous discrete Fourier transform for order tracking in the field of rotating machinery

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2014 .

Diagnostics of rolling element bearings for the traction system of high speed trains : experimental evidences

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2013 .

Electrical pitting of tilting-pad thrust bearings: Modelling and experimental evidence

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2016 .

Rotor to Stator Rub Causing Spiral Vibrations: Modelling and Validation on Experimental Data of Real Rotating Machine

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2004 .

Tuning second order cyclostationarity parameters for the diagnostics of rolling element bearings

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2011 .

Failure diagnostics of a spiral bevel gearbox using EMD and HHT

Paolo Pennacchi, Roberto Ricci, M. Lombardi, 2010 .

Hydraulic instability onset detection in Kaplan turbines by monitoring shaft vibrations

Paolo Pennacchi, Steven Chatterton, Pietro Borghesani, 2012 .

Robustness of Command Input Preshaping Technique Applied to Residual Vibration Reduction

Paolo Pennacchi, 2004 .

Introduction of advanced technologies for steam turbine bearings

Paolo Pennacchi, 2017 .

Proceedings of the 9th IFToMM International Conference on Rotor Dynamics

Paolo Pennacchi, P. Pennacchi, 2015 .

Some results in analyzing the dynamic behavior of blade rows coupled by shroud contacts

Paolo Pennacchi, Nicolò Bachschmid, Emanuel Pesatori, 2011 .

Nonlinear effects caused by coupling misalignment in rotors equipped with journal bearings

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2012 .

Eccentricity Measurements on a Five-pad Tilting Pad Journal Bearing

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2015 .

Crack Diagnosis in Rotating Shafts

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2010 .

Numerical Modeling of Spiral Vibrations Caused by the Presence of Brush Seals

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2018 .

Malfunction Identification at Normal Operating Speed

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2004 .

Analysis of Unbalanced Magnetic Pull Calculation in Generators With Two Pole Pairs

Paolo Pennacchi, Lucia Frosini, Carlo Maria Stoisser, 2009 .

Endurance test-rig for diagnostics and prognostics of rolling element bearings

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2011 .

Deviations Induced by Tool Sharpening in the Profile of Three Screw Pump Rotors

Paolo Pennacchi, Giovanni Mimmi, 1997 .

Diagnostics of gear faults based on EMD and automatic selection of intrinsic mode functions

Paolo Pennacchi, Roberto Ricci, P. Pennacchi, 2011 .

Application of cepstrum pre-whitening for the diagnosis of bearing faults under variable speed conditions

Robert B. Randall, Paolo Pennacchi, Roberto Ricci, 2013 .

An Insight Into the Snubbing Mechanism for the Reduction of Turbine Blade Vibration by Analyzing Chaotic Behaviour

Paolo Pennacchi, Steven Chatterton, Nicolò Bachschmid, 2011 .

Detection of Unsteady Flow in a Kaplan Hydraulic Turbine Using Machine Mechanical Model and Rotor Measured Vibrations

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2012 .

An Experimental Study of Nonlinear Oil-Film Forces in a Tilting-Pad Journal Bearing

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2015 .

Steam instability in a turbo generator: experimental results and modelling of the phenomenon

Paolo Pennacchi, Nicolò Bachschmid, Andrea Vania, 2006 .

Case History of Pad Fluttering in a Tilting-Pad Journal Bearing

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2010 .

Empirical mode decomposition of pressure signal for health condition monitoring in waterjet cutting

Paolo Pennacchi, Bianca Maria Colosimo, Marco Luigi Grasso, 2014 .

A Novel Method of Frequency Band Selection for Squared Envelope Analysis for Fault Diagnosing of Rolling Element Bearings in a Locomotive Powertrain

Paolo Pennacchi, Steven Chatterton, Lang Xu, 2018, Sensors.

Condition monitoring of rotating machinery using bivariate analysis of complex vibration data

Paolo Pennacchi, Nicolò Bachschmid, Andrea Vania, 2004 .

MODELLING OF STEAM WHIRL EXCITATION AND EVALUATION OF STABILITY MARGIN

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2006 .

Application of Robust Regression Methods to Fault Identification in Rotating Machinery

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2010 .

Effects of system parameters uncertainties on the robustness of control by means of motion input pre-shaping

Paolo Pennacchi, Giovanni Mimmi, 2002 .

A New Method for Dynamic Analysis of Pelton Runners Using CFD/FEM Interaction

Paolo Pennacchi, Emanuel Pesatori, Giorgio Turozzi, 2009 .

Updating of the Torsional Model of a Steam Turbo Generator

Paolo Pennacchi, Roberto Ricci, Emanuel Pesatori, 2009 .

Open-Loop Control of a Flecible Manipulator with Two Links: Experimental Results

Paolo Pennacchi, Giovanni Mimmi, Carlo Eugenio Alessandro Rottenbacher, 2001 .

Dynamic Loads in the Three-Lobe Supercharger

Paolo Pennacchi, Giovanni Mimmi, P. Pennacchi, 1999 .

Dynamic Investigation on a Pelton Runner: FEM Calculation and Experimental Results

Paolo Pennacchi, Emanuel Pesatori, Giorgio Turozzi, 2007 .

Robust Fault Identification in Mechanical Systems Using M-estimators

Paolo Pennacchi, Nicolò Bachschmid, Andrea Vania, 2005 .

Rotating shafts affected by transverse cracks: experimental behaviour and modelling techniques

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2007 .

Optimal Control of a Full Vehicle Model under Scarce Knowledge of Plant States

Paolo Pennacchi, Giovanni Mimmi, P Venini, 2000 .

Testing second order cyclostationarity in the squared envelope spectrum of non-white vibration signals

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2013 .

Comparison of the dynamic response of two columns of milling machines made of standard carpentry and metal foam sandwiches

Paolo Pennacchi, Steven Chatterton, Michele Portentoso, 2017 .

Monitoring and diagnostics of rotating machinery

Paolo Pennacchi, Nicolò Bachschmid, Andrea Vania, 2005 .

Performances Degradation of Tilting-Pad Thrust Bearings Due to Electrical Pitting

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2015 .

Steam-whirl analysis in a high pressure cylinder of a turbo generator

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2008 .

Sensitivity analysis of multiple fault identification in rotor systems

Paolo Pennacchi, Alan Facchinetti, 2001 .

Identification of Faults in Rotating Shafts at Rated Speed

Paolo Pennacchi, Nicolò Bachschmid, P. Pennacchi, 2004 .

Thermally induced vibrations due to rub in real rotors

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2007 .

Optimal Frequency Band Selection for the Square Envelope Spectrum in the Diagnostics of Rolling Element Bearings

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2014 .

Special Signal Processing Tools for the Experimental Data of Spiral Vibrations

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2018 .

Accuracy of fault detection in real rotating machinery using model based diagnostic techniques

Paolo Pennacchi, Nicolò Bachschmid, 2002 .

Diagnostics of Rotating Machines: State of the Art and Recent Developments

Paolo Pennacchi, Nicolò Bachschmid, Andrea Vania, 2005 .

Analysis of the Effects of Parallel and Angular Misalignment in Hyperstatic Rotors Equipped With Oil-Film Bearings

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2011 .

A Novel Threshold for the Diagnostics of Rolling Element Bearing

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2014 .

Compression Load Dynamics in a Special Helical Blower: A Modeling Improvement

Paolo Pennacchi, Giovanni Mimmi, P. Pennacchi, 2001 .

Identification of a Generator Fault by Model-Based Diagnostic Techniques

Paolo Pennacchi, Andrea Vania, 2002 .

Torsional Vibrations Caused by Geared Coupling in a Shaft Train Driven by a Steam Turbine

Paolo Pennacchi, Andrea Vania, Franco Frattaroli, 2010 .

Behaviour of tilting-pad journal bearings in case of large manufacturing errors

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2017 .

The reform of the course in mechanical engineering at the Politecnico di Milano, Italy

Paolo Pennacchi, Nicolò Bachschmid, P. Pennacchi, 2003 .

Behavior of Tilting–Pad Journal Bearings With Large Machining Error on Pads

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2016 .

Diagnostic of a helical gear transmission exploiting inverter control measurements

Paolo Pennacchi, Roberto Ricci, M. Pedrinelli, 2007 .

Experimental validation of a transverse crack identification procedure for rotating shafts

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2003 .

Accuracy in the identification of a generator thermal bow

Paolo Pennacchi, Andrea Vania, P. Pennacchi, 2004 .

Influence of Machine Alignment and Load on Steam Turbine Vibrations

Paolo Pennacchi, Andrea Vania, 2008 .

Crack Position and Depth Identification in Rotating Shafts: Part 2 — Experimental Results

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2005 .

Model Based Analysis of Steam-Whip Instability Onsets Occurred in a Power Plant

Paolo Pennacchi, Andrea Vania, 2009 .

Some results in steam whirl analysis

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2007 .

A cyclostationary multi-domain analysis of fluid instability in Kaplan turbines

Paolo Pennacchi, Steven Chatterton, Pietro Borghesani, 2015 .

The combination of empirical mode decomposition and minimum entropy deconvolution for roller bearing diagnostics in non-stationary operation

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2012 .

Diagnostic Significance of Orbit Shape Analysis and its Application to Improve Machine Fault Detection

Paolo Pennacchi, Nicolò Bachschmid, Andrea Vania, 2004 .

Robust estimation of excitation in mechanical systems under model uncertainties

Paolo Pennacchi, Steven Chatterton, Roberto Ricci, 2013 .

Modeling of the Dynamic Response of a Pelton Turbine Hydroelectric Plant

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2011 .

Theoretical model results of rub in real rotating machinery

Paolo Pennacchi, Nicolò Bachschmid, 2007 .

Diagnostics Of Traction System Of Very High Speed trains: Experimental Results And Selection Of The Most Suitable Signal Processing Techniques

Paolo Pennacchi, Steven Chatterton, D. Marinis, 2016 .

Development of an Active Control System for Rotating Machinery by Means of Tilting Pad Journal Bearings

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2016 .

Monitoring of the damage in rolling element bearings

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2015 .

Influence of the Supporting Structure Dynamic Behaviour on the Shaft Vibration of a Real Rotating Machine

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2015 .

Discussion of the dynamic stability of a multi-degree-of-freedom rotor system affected by a transverse crack

Paolo Pennacchi, Roberto Ricci, P. Pennacchi, 2012 .

Fault Diagnosis and Prognosis in Rotating Machines Carried Out by Means of Model-Based Methods: A Case Study

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2013 .

Use of Chaos in the Diagnostics of Rolling Element Bearings

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2015 .

Diagnostics of a crack in a load coupling of a gas turbine using the machine model and the analysis of the shaft vibrations

Paolo Pennacchi, Andrea Vania, P. Pennacchi, 2008 .

Rotating Shafts Affected by Transverse Cracks: A Sensitivity Analysis

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2008 .

Biomechanical Analysis of Pedalling for Rehabilitation Purposes: Experimental Results on Two Pathological Subjects and Comparison with Non-pathological Findings

Paolo Pennacchi, Giovanni Mimmi, Lucia Frosini, 2004, Computer methods in biomechanics and biomedical engineering.

Effects of the Shaft Normal Modes on the Model-Based Identification of Unbalances in Rotating Machines

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2011 .

Modelling, dynamic behaviour and diagnostics of cracked rotors

Paolo Pennacchi, 2012 .

Computation of the Dynamical Behaviour of Faulty Rotor Systems

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2004 .

Fault Identification in Rotor Dynamics Using Robust Estimation Based on M-estimators and the Machine Model

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2006 .

Dynamic Effects Caused by the Non-Linear Behavior of Oil-Film Journal Bearings in Rotating Machines

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2012 .

Advances in vibration control and diagnostics

Paolo Pennacchi, Nicolò Bachschmid, P. Pennacchi, 2006 .

Modelling of Magnetic Pull in Large Size Generator

Paolo Pennacchi, Lucia Frosini, 2005 .

Modelling and Experimental Results of Short Arc Rubs in Rotating Machines

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2008 .

Identification and Simulation of Faults in Rotor Systems: Experimental Results

Paolo Pennacchi, Nicolò Bachschmid, Andrea Vania, 1999 .

Fault Symptom Analysis Techniques Combined with Model-based Methods for the Identification of Rotating Machines Malfunctions

Paolo Pennacchi, Andrea Vania, 2005 .

Experimental Evidences in the Monitoring of Rolling Element Bearings

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2016 .

Design of a Novel Multicylinder Stirling Engine

Paolo Pennacchi, Steven Chatterton, 2015 .

Condition monitoring of the rolling stock and infrastructure: results of a pilot project

Giorgio Diana, Stefano Bruni, Paolo Pennacchi, 2016 .

Analysis of the sensitivity to non-linear effects in the oil-film forces of journal bearings

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2012 .

FAULT IDENTIFICATION IN ROTOR SYSTEM USING MODEL BASED METHODS, EXPERIMENTAL DATA AND ARTIFICIAL NEURAL NETWORK

Paolo Pennacchi, Vicente Lopes, Rogério Mendonça Furtado, 2005 .

Fault Detection and Severity Level Identification of Spiral Bevel Gears under Different Operating Conditions Using Artificial Intelligence Techniques

Paolo Pennacchi, Steven Chatterton, Syed Muhammad Tayyab, 2021, Machines.

Rolling element bearing diagnosis based on singular value decomposition and composite squared envelope spectrum

Paolo Pennacchi, Steven Chatterton, Lang Xu, 2021 .

Definition of Damage Indices for Railway Axle Bearings: Results of Long-Lasting Tests

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2021, Machines.

Spiral Vibrations in Rotors Due to a Rub

Paolo Pennacchi, Nicolò Bachschmid, P Venini, 2000 .

Analysis of Rotor-to-Stator Rub in a Large Steam Turbogenerator

Paolo Pennacchi, Andrea Vania, 2007 .

Effect of Oil Film Bearing Misalignment on Rigidly Coupled Shafts

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2006 .

Rotor Testing for Crack Detection

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2010 .

Intermittent Rub Caused by Carbonized Oil in a Steam Turbine

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2018, Mechanisms and Machine Science.

On Model Updating of Turbo-generator set

Paolo Pennacchi, Steven Chatterton, Nicolò Bachschmid, 2009 .

Analysis of light rotor-to-stator contacts in large turbine-generator units

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2001 .

Design Of Three-screw Positive Displacement Rotary Pumps

Paolo Pennacchi, Giovanni Mimmi, 1970 .

Bearing Fault Diagnostics Using the Spectral Pattern Recognition

Paolo Pennacchi, Steven Chatterton, Pietro Borghesani, 2011 .

Steam whirl stability margin in a power unit

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2006 .

Modelling of Spiral Vibrations Due to Rub in Real Rotors

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2004 .

Spiral Vibrations Due to Rub: Numerical Analysis and Field Experiences

Paolo Pennacchi, Andrea Vania, Nicolò Bachschmid, 2001 .

Use of the orbit shape analysis to detect faults in rotating machines

Paolo Pennacchi, Andrea Vania, 2003 .

System for The Biomechanical Analysis of Pedalling

Paolo Pennacchi, Giovanni Mimmi, Lucia Frosini, 2001 .

On the Thermodynamic Process in the Bulk-Flow Model for the Estimation of the Dynamic Coefficients of Labyrinth Seals

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2017 .

Numerical investigation of the effect of manufacturing errors in pads on the behaviour of tilting-pad journal bearings

Paolo Pennacchi, Andrea Vania, Steven Chatterton, 2018 .

Supersynchronous Vibrations Caused by Transverse Annular Cracks in Rotating Machines

Paolo Pennacchi, Steven Chatterton, Andrea Tommaso Vania, 2011 .

Results Obtained Using Simulations

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2010 .

Some Special Effects Caused by Cracks

Paolo Pennacchi, Nicolò Bachschmid, Ezio Tanzi, 2010 .

Determination of Tool Profile for the Milling of Three-Screw Pump Rotor

Paolo Pennacchi, Giovanni Mimmi, 1997 .

Comments on “Simple explicit formulae for calculating limit dimensions to avoid undercutting in the rotor of a Cycloid rotor pump” by Ye, Zhonghe; Zhang, Wei; Huang, Qinghai; Chen, Chuanming [Mech. Mach. Theory 41 (4) (2006) 405–414]

Paolo Pennacchi, P. Pennacchi, 2007 .

INTERNAL LOBE PUMP DESIGN

Paolo Pennacchi, Giovanni Mimmi, 1997 .

Experimental Analysis of Faults due to Rotor Eccentricity in Brushless Motors

Paolo Pennacchi, Giovanni Mimmi, Lucia Frosini, 2004 .

Flow Rate Regularity in Rotary Trochoidal-Lobe Pumps

Paolo Pennacchi, Giovanni Mimmi, 1994 .

Crack effects in rotordynamics

Paolo Pennacchi, Nicolò Bachschmid, P. Pennacchi, 2008 .

Crack Detectability in Vertical Axis Cooling Pumps During Operation

Paolo Pennacchi, F. Hasnaoui, Nicolò Bachschmid, 2002 .

Non Undercutting Conditions in Internal Gears

Paolo Pennacchi, Giovanni Mimmi, P. Pennacchi, 2000 .